Date: Wed, 25 Dec 2013 23:02:04 +0100 From: Johan Hendriks <joh.hendriks@gmail.com> To: Joseph Olatt <joji@eskimo.com>, freebsd-stable@freebsd.org Subject: Re: CAM status: CCB request completed with an error Message-ID: <CAOaKuAU2Y0q8aWJOaYOPL-7UW6SUg80UEJ9ChasU%2BfqAOxzKuQ@mail.gmail.com> In-Reply-To: <20131223183646.GA22168@eskimo.com> References: <20131223183646.GA22168@eskimo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I did go from 9 pre to 10, and had a lot of those messages also. I needed to rebuild some ports like hal, smartmontools and other ports to notice the changes made to the cam subsystem. Maybe some of it got backported to 9 as well and you need to rebuild them also. Regards Johan Op 23 dec. 2013 19:45 schreef "Joseph Olatt" <joji@eskimo.com>: > Hi, > > Just upgraded from 9.2-PRERELEASE to the following: > > FreeBSD cognac 9.2-STABLE FreeBSD 9.2-STABLE #0 r259742: Sun Dec 22 > 20:01:13 CST 2013 root@cognac:/usr/obj/usr/src/sys/GENERIC i386 > > and started seeing the following error when I insert a USB flash drive. > This flash drive was working fine with 9.2-PRERELEASE. > > ugen6.2: <Lexar> at usbus6 > umass0: <Lexar JD Secure II +, class 0/0, rev 2.00/11.00, addr 2> on > usbus6 > umass0: SCSI over Bulk-Only; quirks = 0x4101 > umass0:2:0:-1: Attached to scbus2 > (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 > (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an > error > (probe0:umass-sim0:0:0:0): Retrying command > (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 > (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an > error > (probe0:umass-sim0:0:0:0): Retrying command > (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 > (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an > error > (probe0:umass-sim0:0:0:0): Retrying command > (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 > (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an > error > (probe0:umass-sim0:0:0:0): Retrying command > (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 > (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an > error > (probe0:umass-sim0:0:0:0): Error 5, Retries exhausted > > > Anybody else seeing issues with the USB/CAM subsystem with the new the > new 9.2-STABLE code? > > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAOaKuAU2Y0q8aWJOaYOPL-7UW6SUg80UEJ9ChasU%2BfqAOxzKuQ>