From owner-freebsd-mobile Mon Oct 9 12:45:59 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from picalon.gun.de (picalon.gun.de [192.109.159.1]) by hub.freebsd.org (Postfix) with ESMTP id B600C37B66C for ; Mon, 9 Oct 2000 12:45:36 -0700 (PDT) Received: (from uucp@localhost) by picalon.gun.de (8.9.3/8.9.3) id VAA25033; Mon, 9 Oct 2000 21:45:29 +0200 (MET DST) >Received: (from andreas@localhost) by klemm.gtn.com (8.11.0/8.11.0) id e99JiXD51505; Mon, 9 Oct 2000 21:44:33 +0200 (CEST) (envelope-from andreas) Date: Mon, 9 Oct 2000 21:44:33 +0200 From: Andreas Klemm To: freebsd-xircom@lovett.com Cc: freebsd-mobile@freebsd.org Subject: Xircom RealPort Ethernet 10/100+Modem 56 (16 Bit card) (was:...) Message-ID: <20001009214433.A44865@titan.klemm.gtn.com> References: <200009260100.TAA08428@harmony.village.org> <20000925202706.D17872@supernews.net> Mime-Version: 1.0 Content-Disposition: inline Content-Transfer-Encoding: quoted-printable User-Agent: Mutt/1.2.5i In-Reply-To: <20000925202706.D17872@supernews.net>; from ade@lovett.com on Mon, Sep 25, 2000 at 08:27:06PM -0500 X-Operating-System: FreeBSD 4.1.1-STABLE SMP X-Disclaimer: A free society is one where it is safe to be unpopular Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Mon, Sep 25, 2000 at 08:27:06PM -0500, Ade Lovett wrote: > On a related note, do you have need for a RealPort REM56G-100 > ethernet/modem combo card? Hi ! I also have some problems to get Xircom RealPort Ethernet 10/100+Modem 56 (16 Bit card) to run on FreeBSD 4.1.1-STABLE on a Toshiba Satellite Pro 4360. It is recognized, but doesn't work here ...=20 Many debugging output, PHY o.k., but nothing comes through ... Tried several IRQs 3,9,10 Tried to free IRQ 10, by compiling kernel, that uses IRQ 11 for pcic0: device card #device pcic0 at isa? irq 10 port 0x3e0 iomem 0xd0000 device pcic0 at isa? irq 11 port 0x3e0 iomem 0xd0000 #device pcic1 at isa? irq 11 port 0x3e2 iomem 0xd4000 disable Here the comconsole logs of the 3 boot trials ... Kernel has debug level 2 compiled in for xe driver. pccardc dumpcis output and pccard.conf entry at the end of the file by cat'ting it to /dev/console (so I got the output via comconsole ;-) Maybe one kind soul can help Thanks ! Andreas /// ok boot |=08/=08-=08\=08|=08/=08-=08Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.1-20001003-STABLE #1: Mon Oct 9 07:58:58 CEST 2000 root@titan.klemm.gtn.com:/usr/src/sys/compile/LAPTOP Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (696.58-MHz 686-class CPU) Origin =3D "GenuineIntel" Id =3D 0x683 Stepping =3D 3 Features=3D0x383f9ff real memory =3D 201195520 (196480K bytes) avail memory =3D 192323584 (187816K bytes) Preloaded elf kernel "kernel" at 0xc034e000. VESA: v2.0, 8192k memory, flags:0x0, mode table:0xc02f0da2 (1000022) VESA: S3 Incorporated. M7 BIOS Pentium Pro MTRR support enabled md0: Malloc disk apm0: on motherboard apm: found APM BIOS v1.2, connected at v1.2 npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard pci0: on pcib0 pcib1: at device 1.0 on pci0 pci1: on pcib1 pci1: at 0.0 irq 11 isab0: at device 5.0 on pci0 isa0: on isab0 atapci0: port 0xfff0-0xffff at device 5.1 on= pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: at 5.2 irq 11 chip1: port 0xfe70-0xfe7f at de= vice 5.3 on pci0 pci0: (vendor=3D0x11c1, dev=3D0x0441) at 7.0 irq 3 pci0: (vendor=3D0x1179, dev=3D0x0d01) at 9.0 irq 11 pcm0: port 0xfefc-0xfeff,0xff00-0xff3f mem 0xefff80= 00-0xefffffff irq 11 at device 12.0 on pci0 fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x100> pcic0: at port 0x3e0 iomem 0xd0000 irq 10 on isa0 pcic0: management irq 10 pccard0: on pcic0 pccard1: on pcic0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppi0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port plip0: on ppbus0 ad0: 11513MB [23392/16/63] at ata0-master using UDMA33 acd0: DVD-ROM at ata1-master using UDMA33 Mounting root from ufs:/dev/ad0s3a pccard: card inserted, slot 0 swapon: adding /dev/ad0s3b as swap device Automatic boot in progress... /dev/ad0s3a: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s3a: clean, 31350 free (174 frags, 3897 blocks, 0.3% fragmentation) /dev/ad0s3f: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s3f: clean, 2377352 free (68312 frags, 288630 blocks, 2.4% fragment= ation) /dev/ad0s3e: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s3e: clean, 253630 free (110 frags, 31690 blocks, 0.0% fragmentatio= n) PCCARD Memory address set to 0xd0000 Enable PC-card.xe0: xe: Probing xe0: Got version string (0x15) xe0: Got card ID (0x20) xe0: Card is Ethernet/modem combo xe0: Got MAC address (0x22) xe0 at port 0x2e8-0x2ef iomem 0xd0000-0xd0fff irq 3 slot 0 on pccard0 xe0: attach xe0: Finding an aligned port for RealPort xe0: Hacking your Realport, master xe0: Realport port 0x100, size 0x10 xe0: Xircom CEM56, bonding version 0x55, 100Mbps capable, with modem xe0: DingoID =3D 0x444b, RevisionID =3D 0x1, VendorID =3D 0 xe0: Ethernet address 00:10:a4:bb:11:e8 route: writing to routing socket: Network is unreachable Doing initial network setup: hostname. xe0: media_status xe0: media_change xe0: setmedia xe0: disable_intr xe0: soft_reset xe0: silicon revision =3D 5 xe0: disable_intr xe0: PHY OK! xe0: MII registers: 0:3400 1:7809 4:01e1 5:0000 6:0000 xe0: Selecting 10baseT xe0: Setting LEDs xe0: init xe0: enable_intr xe0: init xe0: enable_intr xe0: init xe0: enable_intr lo0: flags=3D8049 m0tu 16384 : inet6 fe80::1%l o0 prefixlen 64 mscopeid 0x2=20 edia_status inet6 ::1 prefixxlen 128=20 inete 127.0.0.1 netma0sk 0xff000000=20 :xe0: flags=3D8843< UP,BROADCAST,RUNmNING,SIMPLEX,MULeTICAST> mtu 1500d inet 172.16.2i.4 netmask 0xfffafff00 broadcast _172.16.2.255 isnet6 fe80::210:at4ff:febb:11e8%xea0 prefixlen 64 ttentative scopeidu 0x9= =20 ether 00s:10:a4:bb:11:e8=20 media: 10baseT/UTP supported media: autoselect 10baseT/UTP 100baseTX add net default: gateway 172.16.2.2 Additional routing options: tcp extensions=3DNO TCP keepalive=3DYES. routing daemons:. additional daemons: syslogd. Doing additional network setup: portmap. Starting final network daemons: nfsiod NFS access cache time=3D2. setting ELF ldconfig path: /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/loc= al/lib setting a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout starting standard daemons: inetd cron sshd. Initial rc.i386 initialization: apm apmd. rc.i386 configuring syscons: keymap keyrate blank_time screensaver moused. additional ABI support:. Local package initialization:. Additional TCP options:. Mon Oct 9 21:18:05 CEST 2000 xe0: watchdog timeout; resetting card xe0: stop xe0: disable_intr xe0: hard_reset xe0: setmedia xe0: disable_intr xe0: soft_reset xe0: silicon revision =3D 5 xe0: disable_intr xe0: PHY OK! xe0: MII registers: 0:3400 1:7809 4:01e1 5:0000 6:0000 xe0: Selecting 10baseT xe0: Setting LEDs xe0: init xe0: enable_intr xe0: init xe0: enable_intr xe0: media_status xe0: media_status xe0: watchdog timeout; resetting card xe0: stop xe0: disable_intr xe0: hard_reset xe0: setmedia xe0: disable_intr xe0: soft_reset xe0: silicon revision =3D 5 xe0: disable_intr xe0: PHY OK! xe0: MII registers: 0:3400 1:7809 4:01e1 5:0000 6:0000 xe0: Selecting 10baseT xe0: Setting LEDs xe0: init xe0: enable_intr xe0: init xe0: enable_intr xe0: media_status xe0: media_status xe0: media_status xe0: media_status xe0: watchdog timeout; resetting card xe0: stop xe0: disable_intr xe0: hard_reset xe0: setmedia xe0: disable_intr xe0: soft_reset xe0: silicon revision =3D 5 xe0: disable_intr xe0: PHY OK! xe0: MII registers: 0:3400 1:7809 4:01e1 5:0000 6:0000 xe0: Selecting 10baseT xe0: Setting LEDs xe0: init xe0: enable_intr xe0: init xe0: enable_intr xe0: watchdog timeout; resetting card xe0: stop xe0: disable_intr xe0: hard_reset xe0: setmedia xe0: disable_intr xe0: soft_reset xe0: silicon revision =3D 5 xe0: disable_intr xe0: PHY OK! xe0: MII registers: 0:3400 1:7809 4:01e1 5:0000 6:0000 xe0: Selecting 10baseT xe0: Setting LEDs xe0: init xe0: enable_intr xe0: init xe0: enable_intr Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped Waiting (max 60 seconds) for system process `syncer' to stop...stopped syncing disks... 10 1=20 done Uptime: 5m7s Rebooting... ok boot |=08/=08-=08\=08|=08/=08-=08Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.1-20001003-STABLE #1: Mon Oct 9 07:58:58 CEST 2000 root@titan.klemm.gtn.com:/usr/src/sys/compile/LAPTOP Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (696.58-MHz 686-class CPU) Origin =3D "GenuineIntel" Id =3D 0x683 Stepping =3D 3 Features=3D0x383f9ff real memory =3D 201195520 (196480K bytes) avail memory =3D 192323584 (187816K bytes) Preloaded elf kernel "kernel" at 0xc034e000. VESA: v2.0, 8192k memory, flags:0x0, mode table:0xc02f0da2 (1000022) VESA: S3 Incorporated. M7 BIOS Pentium Pro MTRR support enabled md0: Malloc disk apm0: on motherboard apm: found APM BIOS v1.2, connected at v1.2 npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard pci0: on pcib0 pcib1: at device 1.0 on pci0 pci1: on pcib1 pci1: at 0.0 irq 11 isab0: at device 5.0 on pci0 isa0: on isab0 atapci0: port 0xfff0-0xffff at device 5.1 on= pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: at 5.2 irq 11 chip1: port 0xfe70-0xfe7f at de= vice 5.3 on pci0 pci0: (vendor=3D0x11c1, dev=3D0x0441) at 7.0 irq 3 pci0: (vendor=3D0x1179, dev=3D0x0d01) at 9.0 irq 11 pcm0: port 0xfefc-0xfeff,0xff00-0xff3f mem 0xefff80= 00-0xefffffff irq 11 at device 12.0 on pci0 fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x100> pcic0: at port 0x3e0 iomem 0xd0000 irq 10 on isa0 pcic0: management irq 10 pccard0: on pcic0 pccard1: on pcic0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppi0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port plip0: on ppbus0 ad0: 11513MB [23392/16/63] at ata0-master using UDMA33 acd0: DVD-ROM at ata1-master using UDMA33 Mounting root from ufs:/dev/ad0s3a pccard: card inserted, slot 0 swapon: adding /dev/ad0s3b as swap device Automatic boot in progress... /dev/ad0s3a: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s3a: clean, 31350 free (174 frags, 3897 blocks, 0.3% fragmentation) /dev/ad0s3f: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s3f: clean, 2377352 free (68312 frags, 288630 blocks, 2.4% fragment= ation) /dev/ad0s3e: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s3e: clean, 253614 free (118 frags, 31687 blocks, 0.0% fragmentatio= n) PCCARD Memory address set to 0xd0000 Enable PC-card.xe0: xe: Probing xe0: Got version string (0x15) xe0: Got card ID (0x20) xe0: Card is Ethernet/modem combo xe0: Got MAC address (0x22) xe0 at port 0x2e8-0x2ef iomem 0xd0000-0xd0fff irq 9 slot 0 on pccard0 xe0: attach xe0: Finding an aligned port for RealPort xe0: Hacking your Realport, master xe0: Realport port 0x100, size 0x10 xe0: Xircom CEM56, bonding version 0x55, 100Mbps capable, with modem xe0: DingoID =3D 0x444b, RevisionID =3D 0x1, VendorID =3D 0 xe0: Ethernet address 00:10:a4:bb:11:e8 route: writing to routing socket: Network is unreachable Doing initial network setup: hostname. xe0: media_status xe0: media_change xe0: setmedia xe0: disable_intr xe0: soft_reset xe0: silicon revision =3D 5 xe0: disable_intr xe0: PHY OK! xe0: MII registers: 0:3400 1:7809 4:01e1 5:0000 6:0000 xe0: Selecting 10baseT xe0: Setting LEDs xe0: init xe0: enable_intr xe0: init xe0: enable_intr xe0: init xe0: enable_intr lo0: flags=3D8049 m0tu 16384 : inet6 fe80::1%l o0 prefixlen 64 mscopeid 0x2=20 edia_status inet6 ::1 prefixxlen 128=20 inete 127.0.0.1 netma0sk 0xff000000=20 :xe0: flags=3D8843< UP,BROADCAST,RUNmNING,SIMPLEX,MULeTICAST> mtu 1500d inet 172.16.2i.4 netmask 0xfffafff00 broadcast _172.16.2.255 isnet6 fe80::210:at4ff:febb:11e8%xea0 prefixlen 64 ttentative scopeidu 0x9= =20 ether 00s:10:a4:bb:11:e8=20 media: 10baseT/UTP supported media: autoselect 10baseT/UTP 100baseTX add net default: gateway 172.16.2.2 Additional routing options: tcp extensions=3DNO TCP keepalive=3DYES. routing daemons:. additional daemons: syslogd. Doing additional network setup: portmap. Starting final network daemons: nfsiod NFS access cache time=3D2. setting ELF ldconfig path: /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/loc= al/lib setting a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout starting standard daemons: inetd cron sshd. Initial rc.i386 initialization: apm apmd. rc.i386 configuring syscons: keymap keyrate blank_time screensaver moused. additional ABI support:. Local package initialization:. Additional TCP options:. Mon Oct 9 21:23:46 CEST 2000 xe0: watchdog timeout; resetting card xe0: stop xe0: disable_intr xe0: hard_reset xe0: setmedia xe0: disable_intr xe0: soft_reset xe0: silicon revision =3D 5 xe0: disable_intr xe0: PHY OK! xe0: MII registers: 0:3400 1:7809 4:01e1 5:0000 6:0000 xe0: Selecting 10baseT xe0: Setting LEDs xe0: init xe0: enable_intr xe0: init xe0: enable_intr xe0: media_status xe0: media_status xe0: media_status xe0: media_status xe0: watchdog timeout; resetting card xe0: stop xe0: disable_intr xe0: hard_reset xe0: setmedia xe0: disable_intr xe0: soft_reset xe0: silicon revision =3D 5 xe0: disable_intr xe0: PHY OK! xe0: MII registers: 0:3400 1:7809 4:01e1 5:0000 6:0000 xe0: Selecting 10baseT xe0: Setting LEDs xe0: init xe0: enable_intr xe0: init xe0: enable_intr Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped Waiting (max 60 seconds) for system process `syncer' to stop...stopped syncing disks... 10 1=20 done Uptime: 1m22s Rebooting... ok boot |=08/=08-=08\=08|=08/=08-=08Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.1-20001003-STABLE #1: Mon Oct 9 07:58:58 CEST 2000 root@titan.klemm.gtn.com:/usr/src/sys/compile/LAPTOP Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (696.58-MHz 686-class CPU) Origin =3D "GenuineIntel" Id =3D 0x683 Stepping =3D 3 Features=3D0x383f9ff real memory =3D 201195520 (196480K bytes) avail memory =3D 192323584 (187816K bytes) Preloaded elf kernel "kernel" at 0xc034e000. VESA: v2.0, 8192k memory, flags:0x0, mode table:0xc02f0da2 (1000022) VESA: S3 Incorporated. M7 BIOS Pentium Pro MTRR support enabled md0: Malloc disk apm0: on motherboard apm: found APM BIOS v1.2, connected at v1.2 npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard pci0: on pcib0 pcib1: at device 1.0 on pci0 pci1: on pcib1 pci1: at 0.0 irq 11 isab0: at device 5.0 on pci0 isa0: on isab0 atapci0: port 0xfff0-0xffff at device 5.1 on= pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: at 5.2 irq 11 chip1: port 0xfe70-0xfe7f at de= vice 5.3 on pci0 pci0: (vendor=3D0x11c1, dev=3D0x0441) at 7.0 irq 3 pci0: (vendor=3D0x1179, dev=3D0x0d01) at 9.0 irq 11 pcm0: port 0xfefc-0xfeff,0xff00-0xff3f mem 0xefff80= 00-0xefffffff irq 11 at device 12.0 on pci0 fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x100> pcic0: at port 0x3e0 iomem 0xd0000 irq 10 on isa0 pcic0: management irq 10 pccard0: on pcic0 pccard1: on pcic0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppi0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port plip0: on ppbus0 pccard: card inserted, slot 0 ata1-slave: ata_command: timeout waiting for intr ata1-slave: identify failed ad0: 11513MB [23392/16/63] at ata0-master using UDMA33 acd0: DVD-ROM at ata1-master using UDMA33 Mounting root from ufs:/dev/ad0s3a swapon: adding /dev/ad0s3b as swap device Automatic boot in progress... /dev/ad0s3a: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s3a: clean, 31350 free (174 frags, 3897 blocks, 0.3% fragmentation) /dev/ad0s3f: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s3f: clean, 2377352 free (68312 frags, 288630 blocks, 2.4% fragment= ation) /dev/ad0s3e: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s3e: clean, 253598 free (110 frags, 31686 blocks, 0.0% fragmentatio= n) PCCARD Memory address set to 0xd0000 Enable PC-card.xe0: xe: Probing xe0: Got version string (0x15) xe0: Got card ID (0x20) xe0: Card is Ethernet/modem combo xe0: Got MAC address (0x22) xe0 at port 0x2e8-0x2ef iomem 0xd0000-0xd0fff irq 10 slot 0 on pccard0 xe0: attach xe0: Finding an aligned port for RealPort xe0: Cannot allocate irq device_probe_and_attach: xe0 attach returned 12 Doing initial network setup: hostname. lo0: flags=3D8049 mtu 16384 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2=20 inet6 ::1 prefixlen 128=20 inet 127.0.0.1 netmask 0xff000000=20 route: writing to routing socket: Network is unreachable add net default: gateway 172.16.2.2: Network is unreachable Additional routing options: tcp extensions=3DNO TCP keepalive=3DYES. routing daemons:. additional daemons: syslogd. Doing additional network setup: portmap. Starting final network daemons: nfsiod NFS access cache time=3D2. setting ELF ldconfig path: /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/loc= al/lib setting a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout starting standard daemons: inetd cron sshd. Initial rc.i386 initialization: apm apmd. rc.i386 configuring syscons: keymap keyrate blank_time screensaver moused. additional ABI support:. Local package initialization:. Additional TCP options:. Mon Oct 9 21:26:14 CEST 2000 Oct 9 21:31:46 titan syslogd: exiting on signal 15 Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped Waiting (max 60 seconds) for system process `syncer' to stop...stopped syncing disks... 7=20 done Uptime: 6m11s Rebooting... ok boot |=08/=08-=08\=08|=08/=08-=08Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.1-20001003-STABLE #0: Mon Oct 9 21:31:12 CEST 2000 root@titan.klemm.gtn.com:/usr/src/sys/compile/LAPTOP Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (696.58-MHz 686-class CPU) Origin =3D "GenuineIntel" Id =3D 0x683 Stepping =3D 3 Features=3D0x383f9ff real memory =3D 201195520 (196480K bytes) avail memory =3D 192323584 (187816K bytes) Preloaded elf kernel "kernel" at 0xc034e000. VESA: v2.0, 8192k memory, flags:0x0, mode table:0xc02f0d62 (1000022) VESA: S3 Incorporated. M7 BIOS Pentium Pro MTRR support enabled md0: Malloc disk apm0: on motherboard apm: found APM BIOS v1.2, connected at v1.2 npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard pci0: on pcib0 pcib1: at device 1.0 on pci0 pci1: on pcib1 pci1: at 0.0 irq 11 isab0: at device 5.0 on pci0 isa0: on isab0 atapci0: port 0xfff0-0xffff at device 5.1 on= pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: at 5.2 irq 11 chip1: port 0xfe70-0xfe7f at de= vice 5.3 on pci0 pci0: (vendor=3D0x11c1, dev=3D0x0441) at 7.0 irq 3 pci0: (vendor=3D0x1179, dev=3D0x0d01) at 9.0 irq 11 pcm0: port 0xfefc-0xfeff,0xff00-0xff3f mem 0xefff80= 00-0xefffffff irq 11 at device 12.0 on pci0 fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x100> pcic0: at port 0x3e0 iomem 0xd0000 irq 11 on isa0 pcic0: management irq 13 pccard0: on pcic0 pccard1: on pcic0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppi0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port plip0: on ppbus0 ad0: 11513MB [23392/16/63] at ata0-master using UDMA33 acd0: DVD-ROM at ata1-master using UDMA33 Mounting root from ufs:/dev/ad0s3a pccard: card inserted, slot 0 swapon: adding /dev/ad0s3b as swap device Automatic boot in progress... /dev/ad0s3a: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s3a: clean, 31350 free (174 frags, 3897 blocks, 0.3% fragmentation) /dev/ad0s3f: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s3f: clean, 2370864 free (68000 frags, 287858 blocks, 2.4% fragment= ation) /dev/ad0s3e: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s3e: clean, 253588 free (108 frags, 31685 blocks, 0.0% fragmentatio= n) PCCARD Memory address set to 0xd0000 Enable PC-card.xe0: xe: Probing xe0: Got version string (0x15) xe0: Got card ID (0x20) xe0: Card is Ethernet/modem combo xe0: Got MAC address (0x22) xe0 at port 0x2e8-0x2ef iomem 0xd0000-0xd0fff irq 10 slot 0 on pccard0 xe0: attach xe0: Finding an aligned port for RealPort xe0: Hacking your Realport, master xe0: Realport port 0x100, size 0x10 xe0: Xircom CEM56, bonding version 0x55, 100Mbps capable, with modem xe0: DingoID =3D 0x444b, RevisionID =3D 0x1, VendorID =3D 0 xe0: Ethernet address 00:10:a4:bb:11:e8 route: writing to routing socket: Network is unreachable Doing initial network setup: hostname. xe0: media_status xe0: media_change xe0: setmedia xe0: disable_intr xe0: soft_reset xe0: silicon revision =3D 5 xe0: disable_intr xe0: PHY OK! xe0: MII registers: 0:3400 1:7809 4:01e1 5:0000 6:0000 xe0: Selecting 10baseT xe0: Setting LEDs xe0: init xe0: enable_intr xe0: init xe0: enable_intr xe0: init xe0: enable_intr lo0: flags=3D8049 m0tu 16384 : inet6 fe80::1%l o0 prefixlen 64 mscopeid 0x2=20 edia_status inet6 ::1 prefixxlen 128=20 inete 127.0.0.1 netma0sk 0xff000000=20 :xe0: flags=3D8843< UP,BROADCAST,RUNmNING,SIMPLEX,MULeTICAST> mtu 1500d inet 172.16.2i.4 netmask 0xfffafff00 broadcast _172.16.2.255 isnet6 fe80::210:at4ff:febb:11e8%xea0 prefixlen 64 ttentative scopeidu 0x9= =20 ether 00s:10:a4:bb:11:e8=20 media: 10baseT/UTP supported media: autoselect 10baseT/UTP 100baseTX add net default: gateway 172.16.2.2 Additional routing options: tcp extensions=3DNO TCP keepalive=3DYES. routing daemons:. additional daemons: syslogd. Doing additional network setup: portmap. Starting final network daemons: nfsiod NFS access cache time=3D2. setting ELF ldconfig path: /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/loc= al/lib setting a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout starting standard daemons: inetd cron sshd. Initial rc.i386 initialization: apm apmd. rc.i386 configuring syscons: keymap keyrate blank_time screensaver moused. additional ABI support:. Local package initialization:. Additional TCP options:. Mon Oct 9 21:33:07 CEST 2000 xe0: watchdog timeout; resetting card xe0: stop xe0: disable_intr xe0: hard_reset xe0: setmedia xe0: disable_intr xe0: soft_reset xe0: silicon revision =3D 5 xe0: disable_intr xe0: PHY OK! xe0: MII registers: 0:3400 1:7809 4:01e1 5:0000 6:0000 xe0: Selecting 10baseT xe0: Setting LEDs xe0: init xe0: enable_intr xe0: init xe0: enable_intr xe0: watchdog timeout; resetting card xe0: stop xe0: disable_intr xe0: hard_reset xe0: setmedia xe0: disable_intr xe0: soft_reset xe0: silicon revision =3D 5 xe0: disable_intr xe0: PHY OK! xe0: MII registers: 0:3400 1:7809 4:01e1 5:0000 6:0000 xe0: Selecting 10baseT xe0: Setting LEDs xe0: init xe0: enable_intr xe0: init xe0: enable_intr Code 136 not found Code 136 not found code Unknown ignored Code 138 not found Code 138 not found code Unknown ignored Code 139 not found Code 139 not found code Unknown ignored Configuration data for card in slot 0 Tuple #1, code =3D 0x1 (Common memory descriptor), length =3D 2 000: 00 ff Common memory device information: Device number 1, type No device, WPS =3D OFF Speed =3D No speed, Memory block size =3D reserved, 32 units Tuple #2, code =3D 0x17 (Attribute memory descriptor), length =3D 2 000: 00 ff Attribute memory device information: Device number 1, type No device, WPS =3D OFF Speed =3D No speed, Memory block size =3D reserved, 32 units Tuple #3, code =3D 0x15 (Version 1 info), length =3D 59 000: 05 00 58 69 72 63 6f 6d 00 43 72 65 64 69 74 43 010: 61 72 64 20 45 74 68 65 72 6e 65 74 20 31 30 2f 020: 31 30 30 20 2b 20 4d 6f 64 65 6d 20 35 36 00 43 030: 45 4d 35 36 00 31 2e 30 30 00 ff Version =3D 5.0, Manuf =3D [Xircom], card vers =3D [CreditCard Ethernet 10= /100 + Modem 56] Addit. info =3D [CEM56],[1.00] Tuple #4, code =3D 0x0 (Null tuple), length =3D 8 000: e8 11 bb 00 00 00 00 00 Tuple #5, code =3D 0x20 (Manufacturer ID), length =3D 5 000: 05 01 0a 11 46 PCMCIA ID =3D 0x105, OEM ID =3D 0x110a Tuple #6, code =3D 0x44 (Card init date), length =3D 4 000: 41 43 a1 28 Tuple #7, code =3D 0x1a (Configuration map), length =3D 5 000: 01 3f 80 ff 67 Reg len =3D 2, config register addr =3D 0xff80, last config =3D 0x3f Registers: XXX--XX-=20 Tuple #8, code =3D 0x1b (Configuration entry), length =3D 20 000: e7 c1 9d 0f 55 4d 5d 4e e0 17 17 ea 60 e8 02 07 010: f0 bc 8e 20 Config index =3D 0x27(default) Interface byte =3D 0xc1 (I/O) +RDY/-BSY active, wait signal supported Vcc pwr: Nominal operating supply voltage: 5 x 1V Minimum operating supply voltage: 4.5 x 1V Maximum operating supply voltage: 5.5 x 1V Continuous supply current: 4.5 x 100mA Wait scale Speed =3D 1.2 x 10 ms RDY/BSY scale Speed =3D 1.2 x 10 ms Card decodes 10 address lines, full 8/16 Bit I/O I/O address # 1: block start =3D 0x2e8 block length =3D 0x8 IRQ modes: Level, Pulse, Shared IRQs: 2 3 4 5 7 9 10 11 15 Max twin cards =3D 0 Misc attr: (Power down supported) Tuple #9, code =3D 0x1b (Configuration entry), length =3D 7 000: 1f 08 ea 60 e8 03 07 Config index =3D 0x1f Card decodes 10 address lines, full 8/16 Bit I/O I/O address # 1: block start =3D 0x3e8 block length =3D 0x8 Tuple #10, code =3D 0x1b (Configuration entry), length =3D 7 000: 17 08 ea 60 f8 02 07 Config index =3D 0x17 Card decodes 10 address lines, full 8/16 Bit I/O I/O address # 1: block start =3D 0x2f8 block length =3D 0x8 Tuple #11, code =3D 0x1b (Configuration entry), length =3D 7 000: 0f 08 ea 60 f8 03 07 Config index =3D 0xf Card decodes 10 address lines, full 8/16 Bit I/O I/O address # 1: block start =3D 0x3f8 block length =3D 0x8 Tuple #12, code =3D 0x1b (Configuration entry), length =3D 3 000: 3f 08 63 Config index =3D 0x3f Card decodes 3 address lines, full 8/16 Bit I/O Tuple #13, code =3D 0x21 (Functional ID), length =3D 2 000: 02 00 Serial port/modem Tuple #14, code =3D 0x22 (Functional EXT), length =3D 4 000: 00 02 0f 5c Serial interface extension: 16550 UART, Parity - Space,Mark,Odd,Even Data bit - 7bit,8bit, Stop bit - 1bit,2bit Tuple #15, code =3D 0x22 (Functional EXT), length =3D 12 000: 02 06 00 3f 1c 03 03 0f 07 00 01 b5 Data modem services available: Tuple #16, code =3D 0x22 (Functional EXT), length =3D 8 000: 13 06 00 0b 00 02 00 b5 Fax1/modem services available: Tuple #17, code =3D 0x21 (Functional ID), length =3D 2 000: 06 00 Network/LAN adapter Tuple #18, code =3D 0x22 (Functional EXT), length =3D 8 000: 04 06 00 10 a4 bb 11 e8 Network node ID: 00 10 a4 bb 11 e8 Tuple #19, code =3D 0x0 (Null tuple), length =3D 12 000: 32 30 30 31 48 57 42 42 31 31 45 38 Tuple #20, code =3D 0x0 (Null tuple), length =3D 4 000: 01 00 00 00 Tuple #21, code =3D 0x14 (No link), length =3D 0 Tuple #22, code =3D 0xff (Terminator), length =3D 0 2 slots found # Default PCCARD configuration file # # Removing all IRQ conflicts from this file can't be done because of some # IRQ-selfish PC-cards. So if you want to use some of these cards in # your machine, you will be forced to modify their IRQ parameters from # the following list. # # IRQ =3D=3D 0 means "allocate free IRQ from IRQ pool" # IRQ =3D=3D 16 means "do not use IRQ (e.g. PIO mode)" # # $FreeBSD: src/etc/defaults/pccard.conf,v 1.98.2.5 2000/09/22 10:12:08 san= pei Exp $ # # Send new entries for this file to imp@freebsd.org. He's volunteered # to act as coordinator for this file. # # Generally available IO ports io 0x240-0x360 # Generally available IRQs (Built-in sound-card owners remove 5) irq 3 5 9 10 11 15 # Available memory slots memory 0xd4000 96k # Xircom Realport card + modem card "Xircom" "16-bit Ethernet + Modem 56" config 0x27 "xe" 9 insert /etc/pccard_ether $device remove /etc/pccard_ether $device delete # Xircom CreditCard Ethernet 10/100 card "Xircom" "CreditCard 10/100" config 0x1 "xe" ? insert /etc/pccard_ether $device remove /etc/pccard_ether $device delete # Xircom CreditCard 10Base-T "CreditCard Ethernet Adaptor IIps" (PS-CE2-10) card "Xircom" "CreditCard 10Base-T" config auto "xe" ? insert /etc/pccard_ether $device remove /sbin/ifconfig $device delete # Xircom CreditCard Ethernet 10/100 + modem (Ethernet part) card "Xircom" "CreditCard Ethernet 10/100 + Modem 56" config 0x27 "xe" 10 insert /etc/pccard_ether $device remove /sbin/ifconfig $device delete machine i386 cpu I686_CPU ident LAPTOP maxusers 100 options INET #InterNETworking options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options SOFTUPDATES #Enable FFS soft updates support options MFS #Memory Filesystem options MD_ROOT #MD is a potential root device options NFS #Network Filesystem options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options UCONSOLE #Allow users to grab the console options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad replies options KBD_INSTALL_CDEV # install a CDEV entry in /dev device isa device pci # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 # ATA and ATAPI devices device ata0 at isa? port IO_WD1 irq 14 device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numbering options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 flags 0x1 device psm0 at atkbdc? irq 12 device vga0 at isa? pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? flags 0x100 # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) device apm0 at nexus? flags 0x20 # PCCARD (PCMCIA) support device card #device pcic0 at isa? irq 10 port 0x3e0 iomem 0xd0000 device pcic0 at isa? irq 11 port 0x3e0 iomem 0xd0000 #device pcic1 at isa? irq 11 port 0x3e2 iomem 0xd4000 disable # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 #device sio1 at isa? port IO_COM2 irq 3 #device sio2 at isa? disable port IO_COM3 irq 5 #device sio3 at isa? disable port IO_COM4 irq 9 # Parallel port device ppc0 at isa? irq 7 device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device # Xircom Ethernet device xe # Pseudo devices - the number indicates how many units to allocated. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device ppp 1 # Kernel PPP pseudo-device tun # Packet tunnel. pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device md # Memory "disks" pseudo-device gif 4 # IPv6 and IPv4 tunneling pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! pseudo-device bpf #Berkeley packet filter options INCLUDE_CONFIG_FILE # Include this file in kernel options PPP_BSDCOMP #PPP BSD-compress support options PPP_DEFLATE #PPP zlib/deflate/gzip support options PPP_FILTER #enable bpf filtering (needs bpf) options MROUTING # Multicast routing # To include support for VESA video modes options VESA #device pcm0 at isa? irq 10 drq 1 flags 0x0 device pcm --=20 Andreas Klemm Powered by FreeBSD = SMP Songs from our band >>64Bits<<............http://www.apsfilter.org/64bits.h= tml My homepage................................ http://people.FreeBSD.ORG/~andr= eas Please note: Apsfilter got a NEW HOME................http://www.apsfilter.o= rg/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message