From owner-freebsd-current@FreeBSD.ORG Wed Jan 14 01:01:44 2004 Return-Path: Delivered-To: freebsd-current@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id B637B16A4CE for ; Wed, 14 Jan 2004 01:01:44 -0800 (PST) Received: from vela.astro.uu.se (vela.astro.UU.SE [130.238.192.58]) by mx1.FreeBSD.org (Postfix) with ESMTP id 5803843D3F for ; Wed, 14 Jan 2004 01:01:40 -0800 (PST) (envelope-from remo@astro.uu.se) Received: from sky.astro.uu.se (sky.astro.UU.SE [130.238.192.102]) by vela.astro.uu.se (8.12.10/8.12.10) with ESMTP id i0E91cts003393 for ; Wed, 14 Jan 2004 10:01:38 +0100 (MET) Received: from sky.astro.uu.se (localhost [127.0.0.1]) by sky.astro.uu.se (8.12.10/8.12.10) with ESMTP id i0E91cnI019337 for ; Wed, 14 Jan 2004 10:01:38 +0100 (MET) Message-Id: <200401140901.i0E91cnI019337@sky.astro.uu.se> X-Mailer: exmh version 2.5 07/13/2001 with nmh-1.0.4 To: freebsd-current@freebsd.org Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Wed, 14 Jan 2004 10:01:38 +0100 From: Remo Collet X-Mailman-Approved-At: Wed, 14 Jan 2004 05:28:04 -0800 Subject: problem w/ USB cdrom on 5.2 X-BeenThere: freebsd-current@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Discussions about the use of FreeBSD-current List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 14 Jan 2004 09:01:44 -0000 >>On Tue, 13 Jan 2004, Yuri Khotyaintsev wrote: > >> I cannot use Dell USB cdrom with 5.2-RELEASE. >> The same drive works without any problems on 4.9. >> >> Any clues? Boot log attached. >Not much info here ... uhci, some phase error on initializing umass. What >messages do you get if you boot up without it attached, then plug it in? Hi, we tried to boot up without the CD drive attached and plugged it in only afterwards. Here is the messages we get: umass0: Dell USB Drive A01, rev 2.00/1.04, addr 2 umass0: Get Max Lun not supported (STALLED) umass0:1:0:-1: Attached to scbus1 umass0: Phase Error, residue = 0 (probe0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR (probe0:umass-sim0:0:0:0): Retrying Command umass0: Phase Error, residue = 0 (probe0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR (probe0:umass-sim0:0:0:0): Retrying Command umass0: Phase Error, residue = 0 (probe0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR (probe0:umass-sim0:0:0:0): Retrying Command umass0: Phase Error, residue = 0 (probe0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR (probe0:umass-sim0:0:0:0): Retrying Command umass0: Phase Error, residue = 0 (probe0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR (probe0:umass-sim0:0:0:0): error 5 (probe0:umass-sim0:0:0:0): Retries Exausted If it may be of any help understanding what is going on, here below follows the boot log (booting without the CD unit plugged in of course) Cheers, Remo Collet Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-RELEASE #2: Tue Jan 13 11:44:10 CET 2004 root@macinino.astro.uu.se:/usr/obj/usr/src/sys/MACININO Preloaded elf kernel "/boot/kernel/kernel" at 0xc083d000. Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc083d21c. Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc083d2c8. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc083d374. Calibrating clock(s) ... i8254 clock: 1193195 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1398817972 Hz CPU: Intel(R) Pentium(R) M processor 1400MHz (1398.82-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x695 Stepping = 5 Features=0xa7e9f9bf real memory = 1072340992 (1022 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c26000 - 0x000000003ec89fff, 1040596992 bytes (254052 pages) avail memory = 1032208384 (984 MB) bios32: Found BIOS32 Service Directory header at 0xc00ffe80 bios32: Entry = 0xffe90 (c00ffe90) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xc97e pnpbios: Found PnP BIOS data at 0xc00fe2d0 pnpbios: Entry = f0000:e2f4 Rev = 1.0 pnpbios: Event flag at 4b4 Other BIOS signatures found: wlan: <802.11 Link Layer> null: mem: Pentium Pro MTRR support enabled random: npx0: [FAST] npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard pci_open(1): mode 1 addr port (0x0cf8) is 0x8000eac4 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=35808086) pcibios: BIOS version 2.10 Using $PIR table, 9 entries at 0xc00fc5a0 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 29 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 B 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 D 0x6b 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 D 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 31 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 31 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 2 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 1 0 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 1 1 A 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 1 1 B 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 1 3 A 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 1 3 B 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 8 0 A 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 8 0 B 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 8 1 A 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 8 1 B 0x63 3 4 5 6 7 9 10 11 12 14 15 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_cpu0: on acpi0 acpi_tz0: on acpi0 acpi_acad0: on acpi0 acpi_cmbat0: on acpi0 acpi_lid0: on acpi0 acpi_button0: on acpi0 acpi_button1: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 ---- initial configuration ------------------------ \\_SB_.PCI0.LNKA irq 11: [ 9 10 11] low,level,sharable 0.31.0 \\_SB_.PCI0.LNKB irq 11: [ 5 7] low,level,sharable 0.31.1 \\_SB_.PCI0.LNKC irq 11: [ 9 10 11] low,level,sharable 0.31.2 \\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 0.31.3 \\_SB_.PCI0.LNKA irq 11: [ 9 10 11] low,level,sharable 0.29.0 \\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 0.29.1 \\_SB_.PCI0.LNKC irq 11: [ 9 10 11] low,level,sharable 0.29.2 \\_SB_.PCI0.LNKH irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.29.3 \\_SB_.PCI0.LNKA irq 11: [ 9 10 11] low,level,sharable 0.2.0 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.PCI0.LNKA irq 11: [ 9 10 11] low,level,sharable 0.31.0 \\_SB_.PCI0.LNKB irq 11: [ 5 7] low,level,sharable 0.31.1 \\_SB_.PCI0.LNKC irq 11: [ 9 10 11] low,level,sharable 0.31.2 \\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 0.31.3 \\_SB_.PCI0.LNKA irq 11: [ 9 10 11] low,level,sharable 0.29.0 \\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 0.29.1 \\_SB_.PCI0.LNKC irq 11: [ 9 10 11] low,level,sharable 0.29.2 \\_SB_.PCI0.LNKH irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.29.3 \\_SB_.PCI0.LNKA irq 11: [ 9 10 11] low,level,sharable 0.2.0 pci0: on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base 00000000, size 0, enabled found-> vendor=0x8086, dev=0x3580, revid=0x02 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3584, revid=0x02 bus=0, slot=0, func=1 class=08-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3585, revid=0x02 bus=0, slot=0, func=3 class=08-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 3, range 32, base f0000000, size 27, enabled map[14]: type 1, range 32, base faf80000, size 19, enabled map[18]: type 4, range 32, base 0000c000, size 3, enabled pcib0: matched entry for 0.2.INTA (source \\_SB_.PCI0.LNKA) pcib0: slot 2 INTA is routed to irq 11 found-> vendor=0x8086, dev=0x3582, revid=0x02 bus=0, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 1 supports D0 D1 D3 current D0 map[10]: type 3, range 32, base e8000000, size 27, enabled map[14]: type 1, range 32, base faf00000, size 19, enabled found-> vendor=0x8086, dev=0x3582, revid=0x02 bus=0, slot=2, func=1 class=03-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 1 supports D0 D1 D3 current D0 map[20]: type 4, range 32, base 0000bf80, size 5, enabled pcib0: matched entry for 0.29.INTA (source \\_SB_.PCI0.LNKA) pcib0: slot 29 INTA is routed to irq 11 found-> vendor=0x8086, dev=0x24c2, revid=0x01 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type 4, range 32, base 0000bf40, size 5, enabled pcib0: matched entry for 0.29.INTB (source \\_SB_.PCI0.LNKD) pcib0: slot 29 INTB is routed to irq 11 found-> vendor=0x8086, dev=0x24c4, revid=0x01 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[20]: type 4, range 32, base 0000bf20, size 5, enabled pcib0: matched entry for 0.29.INTC (source \\_SB_.PCI0.LNKC) pcib0: slot 29 INTC is routed to irq 11 found-> vendor=0x8086, dev=0x24c7, revid=0x01 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 map[10]: type 1, range 32, base faeffc00, size 10, enabled pcib0: matched entry for 0.29.INTD (source \\_SB_.PCI0.LNKH) pcib0: slot 29 INTD is routed to irq 11 found-> vendor=0x8086, dev=0x24cd, revid=0x01 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 powerspec 2 supports D0 D3 current D0 found-> vendor=0x8086, dev=0x2448, revid=0x81 bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x8080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24cc, revid=0x01 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 4, range 32, base 000001f0, size 3, enabled map[14]: type 4, range 32, base 000003f4, size 2, enabled map[18]: type 4, range 32, base 00000170, size 3, enabled map[1c]: type 4, range 32, base 00000374, size 2, enabled map[20]: type 4, range 32, base 0000bfa0, size 4, enabled found-> vendor=0x8086, dev=0x24ca, revid=0x01 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[10]: type 4, range 32, base 0000d800, size 8, enabled map[14]: type 4, range 32, base 0000dc40, size 6, enabled map[18]: type 1, range 32, base faeff800, size 9, enabled map[1c]: type 1, range 32, base faeff400, size 8, enabled pcib0: matched entry for 0.31.INTB (source \\_SB_.PCI0.LNKB) pcib0: slot 31 INTB is routed to irq 11 found-> vendor=0x8086, dev=0x24c5, revid=0x01 bus=0, slot=31, func=5 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 0000d400, size 8, enabled map[14]: type 4, range 32, base 0000d080, size 7, enabled pcib0: matched entry for 0.31.INTB (source \\_SB_.PCI0.LNKB) pcib0: slot 31 INTB is routed to irq 11 found-> vendor=0x8086, dev=0x24c6, revid=0x01 bus=0, slot=31, func=6 class=07-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 pci0: at device 0.1 (no driver attached) pci0: at device 0.3 (no driver attached) agp0: port 0xc000-0xc007 mem 0xfaf80000-0xfaffffff,0xf0000000-0xf7ffffff irq 11 at device 2.0 on pci0 agp0: detected 892k stolen memory agp0: aperture size is 128M pci0: at device 2.1 (no driver attached) uhci0: port 0xbf80-0xbf9f irq 11 at device 29.0 on pci0 usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0xbf40-0xbf5f irq 11 at device 29.1 on pci0 usb1: on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0xbf20-0xbf3f irq 11 at device 29.2 on pci0 usb2: on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: at device 29.7 (no driver attached) pcib1: at device 30.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xe000-0xefff pcib1: memory decode 0xfc000000-0xfdffffff pcib1: prefetched decode 0xfff00000-0xfffff ---- initial configuration ------------------------ \\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 1.1.0 \\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 1.1.1 \\_SB_.PCI0.LNKB irq 11: [ 5 7] low,level,sharable 1.3.0 \\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 1.3.1 \\_SB_.PCI0.LNKC irq 11: [ 9 10 11] low,level,sharable 1.0.0 \\_SB_.PCI0.LNKB irq 11: [ 5 7] low,level,sharable 1.8.0 \\_SB_.PCI0.LNKB irq 11: [ 5 7] low,level,sharable 1.8.1 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 1.1.0 \\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 1.1.1 \\_SB_.PCI0.LNKB irq 11: [ 5 7] low,level,sharable 1.3.0 \\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 1.3.1 \\_SB_.PCI0.LNKC irq 11: [ 9 10 11] low,level,sharable 1.0.0 \\_SB_.PCI0.LNKB irq 11: [ 5 7] low,level,sharable 1.8.0 \\_SB_.PCI0.LNKB irq 11: [ 5 7] low,level,sharable 1.8.1 pci1: on pcib1 pci1: physical bus=1 map[10]: type 1, range 64, base fcff0000, size 16, enabled pcib1: matched entry for 1.0.INTA (source \\_SB_.PCI0.LNKC) pcib1: slot 0 INTA is routed to irq 11 found-> vendor=0x14e4, dev=0x165d, revid=0x01 bus=1, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0116, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 8 messages, 64 bit found-> vendor=0x104c, dev=0xac47, revid=0x01 bus=1, slot=1, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x07 (1750 ns) intpin=a, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 pcib1: matched entry for 1.1.INTA (source \\_SB_.PCI0.LNKD) pcib1: slot 1 INTA is routed to irq 11 found-> vendor=0x104c, dev=0xac4a, revid=0x01 bus=1, slot=1, func=1 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0107, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x03 (750 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base fcfef800, size 11, enabled map[14]: type 1, range 32, base fcfe8000, size 14, enabled pcib1: matched entry for 1.1.INTA (source \\_SB_.PCI0.LNKD) pcib1: slot 1 INTA is routed to irq 11 found-> vendor=0x104c, dev=0x802b, revid=0x00 bus=1, slot=1, func=2 class=0c-00-10, hdrtype=0x00, mfdev=1 cmdreg=0x0116, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000ecf8, size 3, enabled found-> vendor=0x104c, dev=0x8204, revid=0x00 bus=1, slot=1, func=3 class=08-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0101, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base fcfec000, size 13, enabled pcib1: matched entry for 1.3.INTA (source \\_SB_.PCI0.LNKB) pcib1: slot 3 INTA is routed to irq 11 found-> vendor=0x14e4, dev=0x4320, revid=0x02 bus=1, slot=3, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 bge0: mem 0xfcff0000-0xfcffffff irq 11 at device 0.0 on pci1 pcib1: device bge0 requested decoded memory range 0xfcff0000-0xfcffffff bge0: Ethernet address: 00:0d:56:6d:42:2f miibus0: on bge0 brgphy0: on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge0: bpf attached cbb0: at device 1.0 on pci1 pcib1: device cbb0 requested decoded memory range 0xfc000000-0xfdffffff cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib1: matched entry for 1.1.INTA (source \\_SB_.PCI0.LNKD) pcib1: slot 1 INTA is routed to irq 11 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0xac47104c 0x02100007 0x06070001 0x00822008 0x10: 0xfc000000 0x020000a0 0x20000000 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b 0x40: 0x01391028 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x38405061 0x00000019 0x001f0000 0x012c1202 0x90: 0x606482c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe320001 0x00c00000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 cbb1: irq 11 at device 1.1 on pci1 pcib1: device cbb1 requested decoded memory range 0xfc000000-0xfdffffff cardbus1: on cbb1 pccard1: <16-bit PCCard bus> on cbb1 cbb1: [MPSAFE] cbb1: PCI Configuration space: 0x00: 0xac4a104c 0x02100107 0x06070001 0x00822008 0x10: 0xfc001000 0x020000a0 0x20000000 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b 0x40: 0x01391028 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x38445161 0x00000019 0x001f0000 0x012c1202 0x90: 0x606480c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe320001 0x00c00000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 fwohci0: vendor=104c, dev=802b fwohci0: <1394 Open Host Controller Interface> mem 0xfcfe8000-0xfcfebfff,0xfcfef800-0xfcfeffff irq 11 at device 1.2 on pci1 fwohci0: latency timer 32 -> 32. fwohci0: cache size 8 -> 8. pcib1: device fwohci0 requested decoded memory range 0xfcfef800-0xfcfeffff fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channel is 4. fwohci0: EUI64 32:4f:c0:00:0c:7f:70:10 fwohci0: resetting OHCI...done (loop=0) fwohci0: fwphy_rddata: 0x2 loop=0, retry=0 fwohci0: fwphy_rddata: 0x3 loop=0, retry=0 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: fwphy_rddata: 0x5 loop=0, retry=0 fwohci0: Enable 1394a Enhancements fwohci0: fwphy_rddata: 0x5 loop=0, retry=0 fwohci0: fwphy_rddata: 0x2 loop=0, retry=0 fwohci0: fwphy_rddata: 0x4 loop=0, retry=0 fwohci0: fwphy_rddata: 0x4 loop=0, retry=0 fwohci0: fwphy_rddata: 0x4 loop=0, retry=0 fwohci0: Link S400, max_rec 2048 bytes. fwohci0: BUS_OPT 0xa002 -> 0xf800a002 fwohci0: fwohci_set_intr: 1 firewire0: on fwohci0 sbp0: on firewire0 sbp_attach (cold=1) fwe0: on firewire0 if_fwe0: Fake Ethernet address: 32:4f:c0:7f:70:10 fwe0: bpf attached fwohci0: Initiate bus reset fwohci0: fwphy_rddata: 0x1 loop=0, retry=0 fwohci0: fwphy_rddata: 0x1 loop=0, retry=0 fwohci0: BUS reset sbp_post_busreset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) fwohci0: fw_set_bus_manager: 0->0 (loop=0) firewire0: bus manager 0 (me) send phy_config root_node=-1 gap_count=5 fwohci0: maxdesc: 2 fwohci0: start AT DMA status=0 pci1: at device 1.3 (no driver attached) pci1: at device 3.0 (no driver attached) isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0xbfa0-0xbfaf,0x374-0x377,0x170-0 x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 31.1 on pci0 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: reset tp1 mask=03 ostat0=00 ostat1=00 ata1-master: stat=0x01 err=0x01 lsb=0x01 msb=0x01 ata1-slave: stat=0x01 err=0x01 lsb=0x01 msb=0x01 ata1: reset tp2 mask=03 stat0=01 stat1=01 devices=0x0 ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pcm0: port 0xdc40-0xdc7f,0xd800-0xd8ff mem 0xfaeff400-0xfaeff4ff,0xfaeff800-0xfaeff9ff irq 11 at device 31.5 on pci0 pcm0: pcm0: Codec features headphone, 20 bit DAC, 20 bit ADC, 5 bit master volume, SigmaTel 3D Enhancement pcm0: Primary codec extended features variable rate PCM, reserved 1, AMAP, reserved 4 pcm0: sndbuf_setmap 2eb000, 4000; 0xe9f66000 -> 2eb000 pcm0: sndbuf_setmap 2fd000, 4000; 0xe9f6a000 -> 2fd000 pci0: at device 31.6 (no driver attached) unknown: not probed (disabled) psmcpnp0 irq 12 on acpi0 atkbdc0: port 0x64,0x60 irq 1 on acpi0 atkbd0: flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0065 psm0: irq 12 on atkbdc0 psm0: model GlidePoint, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 sio0: irq maps: 0x801 0x811 0x801 0x801 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A unknown: not probed (disabled) ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 1 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: on ppc0 plip0: on ppbus0 plip0: bpf attached lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: