From owner-freebsd-stable Fri Sep 22 12: 0:40 2000 Delivered-To: freebsd-stable@freebsd.org Received: from dinosaur.umbc.edu (dinosaur.umbc.edu [130.85.179.77]) by hub.freebsd.org (Postfix) with ESMTP id C8C4937B423 for ; Fri, 22 Sep 2000 12:00:31 -0700 (PDT) Received: from localhost (msa@localhost) by dinosaur.umbc.edu (8.9.3/8.9.3) with ESMTP id PAA30593; Fri, 22 Sep 2000 15:00:22 -0400 (EDT) (envelope-from msa@dinosaur.umbc.edu) Date: Fri, 22 Sep 2000 15:00:22 -0400 (EDT) From: Michael Allman X-Sender: msa@dinosaur.umbc.edu To: Brad Knowles Cc: Michael Allman , Matt Dillon , stable@FreeBSD.ORG Subject: Re: Constant panics on 4.1-STABLE! In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Fri, 22 Sep 2000, Brad Knowles wrote: > At 2:34 PM -0400 2000/9/22, Michael Allman wrote: > > > BTW, in case you are wondering, I have received panics when running a > > uniprocessor kernel, including GENERIC. > > Other than the asr Adaptec/DPT SmartRAID V driver problem that > Mike has now fixed, I haven't seen any panics in 4.1-STABLE for a > long time. Can you remind us exactly what all hardware you have, so > that we can compare this to ours and perhaps see what is different? Here is output from dmesg: Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.1-STABLE #0: Fri Sep 1 16:14:52 EDT 2000 root@enigma.dukenet:/usr/obj/usr/src/sys/ENIGMA Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (501.14-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x672 Stepping = 2 Features=0x383fbff real memory = 134217728 (131072K bytes) config> q avail memory = 125431808 (122492K bytes) Programming 24 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000 Preloaded elf kernel "kernel" at 0xc039d000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc039d09c. VESA: v3.0, 4096k memory, flags:0x1, mode table:0xc0330ee2 (1000022) VESA: NVidia Pentium Pro MTRR support enabled md0: Malloc disk npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard pci0: on pcib0 pcib2: at device 1.0 on pci0 pci1: on pcib2 pci1: at 0.0 irq 16 isab0: at device 7.0 on pci0 isa0: on isab0 pci0: at 7.1 pci0: at 7.2 Timecounter "PIIX" frequency 3579545 Hz chip1: port 0x440-0x44f at device 7.3 on pci0 ahc0: port 0xe400-0xe4ff mem 0xfebfe000-0xfebfefff irq 16 at device 11.0 on pci0 ahc0: aic7896/97 Wide Channel A, SCSI Id=7, 16/255 SCBs ahc1: port 0xe800-0xe8ff mem 0xfebff000-0xfebfffff irq 16 at device 11.1 on pci0 ahc1: aic7896/97 Wide Channel B, SCSI Id=7, 16/255 SCBs pcm0: port 0xef00-0xef3f irq 18 at device 12.0 on pci0 fxp0: port 0xee80-0xeebf mem 0xfea00000-0xfeafffff,0xfebfd000-0xfebfdfff irq 19 at device 13.0 on pci0 fxp0: Ethernet address 00:e0:81:10:53:f7 pcib1: on motherboard pci2: on pcib1 fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: irq 1 on atkbdc0 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: on isa0 sc0: VGA <16 virtual consoles, flags=0x200> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode lpt0: on ppbus0 lpt0: Interrupt-driven port APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via IOAPIC #0 intpin 2 IPsec: Initialized Security Association Processing. Waiting 5 seconds for SCSI devices to settle SMP: AP CPU #1 Launched! Mounting root from ufs:/dev/da0s2a da0 at ahc0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-3 device da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled da0: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C) cd0 at ahc1 bus 0 target 3 lun 0 cd0: Removable CD-ROM SCSI-2 device cd0: 20.000MB/s transfers (20.000MHz, offset 8) cd0: Attempt to query device size failed: NOT READY, Medium not present da2 at ahc1 bus 0 target 2 lun 0 da2: Removable Direct Access SCSI-2 device da2: 3.300MB/s transfers da2: Attempt to query device size failed: NOT READY, Medium not present da1 at ahc1 bus 0 target 1 lun 0 da1: Fixed Direct Access SCSI-2 device da1: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled da1: 4357MB (8925000 512 byte sectors: 255H 63S/T 555C) WARNING: / was not properly dismounted IP Filter: v3.4.8 initialized. Default = pass all, Logging = enabled The CPU's are matched 500 MHz Pentium III's. The motherboard is a Tyan Thunderbolt S1837 (http://www.tyan.com/products/html/thunderbolt_p.html). Hope this helps. Michael To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message