Date: Wed, 27 Jun 2012 12:07:25 +0400 From: Boris Samorodov <bsam@passap.ru> To: Alexander Motin <mav@FreeBSD.org> Cc: freebsd-usb@freebsd.org Subject: Re: [usb] Kingston 8Gb is not usable Message-ID: <4FEABF3D.2010206@passap.ru> In-Reply-To: <4FE9E0F6.8040503@FreeBSD.org> References: <4FE9AB28.3070704@passap.ru> <201206261741.14338.hselasky@c2i.net> <4FE9E0F6.8040503@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
26.06.2012 20:19, Alexander Motin пишет: > I see no problems in this output. I would enable more debugging with > `camcontrol debug -IPp all` before plugging it in to see what's going on. Here it is: ----- sudo: bsam : TTY=pts/5 ; PWD=/home/bsam ; USER=root ; COMMAND=/sbin/camcontrol debug -IPp all kernel: (xpt0:xpt0:0:-1:-1): debugging flags now 61 kernel: ugen7.2: <Kingston> at usbus7 kernel: umass0: <Kingston DT101 II, class 0/0, rev 2.00/1.00, addr 2> on usbus7 kernel: umass0: SCSI over Bulk-Only; quirks = 0x0100 kernel: (noperiph:umass-sim0:0:-1:-1): xpt_async(AC_PATH_REGISTERED) kernel: umass0:11:0:-1: Attached to scbus11 kernel: (probe0:umass-sim0:0:0:0): Periph created kernel: (probe0:umass-sim0:0:0:0): Probe started kernel: (probe0:umass-sim0:0:0:0): Probe PROBE_INVALID to PROBE_INQUIRY kernel: (probe0:umass-sim0:0:0:0): Probe PROBE_INQUIRY to PROBE_SUPPORTED_VPD_LIST kernel: (probe0:umass-sim0:0:0:0): Probe PROBE_SUPPORTED_VPD_LIST to PROBE_DEVICE_ID kernel: (probe0:umass-sim0:0:0:0): Probe PROBE_DEVICE_ID to PROBE_SERIAL_NUM kernel: (probe0:umass-sim0:0:0:0): Probe PROBE_SERIAL_NUM to PROBE_TUR_FOR_NEGOTIATION kernel: (probe0:umass-sim0:0:0:0): xpt_async(AC_FOUND_DEVICE) kernel: (pass4:umass-sim0:0:0:0): Periph created kernel: (da0:umass-sim0:0:0:0): Periph created kernel: (probe0:umass-sim0:0:0:0): Probe PROBE_TUR_FOR_NEGOTIATION to PROBE_DONE kernel: (probe0:umass-sim0:0:0:0): Probe completed kernel: (probe0:umass-sim0:0:0:0): Periph invalidated kernel: (probe0:umass-sim0:0:0:0): Periph destroyed kernel: da0 at umass-sim0 bus 0 scbus11 target 0 lun 0 kernel: da0: <Kingston DT101 II 1.00> Removable Direct Access SCSI-2 device kernel: da0: 40.000MB/s transfers kernel: da0: 7634MB (15636304 512 byte sectors: 255H 63S/T 973C) kernel: (da0:umass-sim0:0:0:0): daopen kernel: (da0:umass-sim0:0:0:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 0 0 0 1 0 kernel: (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error kernel: (da0:umass-sim0:0:0:0): SCSI status: Check Condition kernel: (da0:umass-sim0:0:0:0): SCSI sense: No sense data present kernel: (da0:umass-sim0:0:0:0): Retrying command (per sense data) kernel: (da0:umass-sim0:0:0:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 0 0 0 1 0 kernel: (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error kernel: (da0:umass-sim0:0:0:0): SCSI status: Check Condition kernel: (da0:umass-sim0:0:0:0): SCSI sense: No sense data present kernel: (da0:umass-sim0:0:0:0): Error 5, Retries exhausted kernel: (da0:umass-sim0:0:0:0): daclose kernel: (da0:umass-sim0:0:0:0): SYNCHRONIZE CACHE(10). CDB: 35 0 0 0 0 0 0 0 0 0 kernel: (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error kernel: (da0:umass-sim0:0:0:0): SCSI status: Check Condition kernel: (da0:umass-sim0:0:0:0): SCSI sense: No sense data present kernel: (da0:umass-sim0:0:0:0): Retrying command (per sense data) kernel: (da0:umass-sim0:0:0:0): SYNCHRONIZE CACHE(10). CDB: 35 0 0 0 0 0 0 0 0 0 kernel: (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error kernel: (da0:umass-sim0:0:0:0): SCSI status: Check Condition kernel: (da0:umass-sim0:0:0:0): SCSI sense: No sense data present kernel: (da0:umass-sim0:0:0:0): Error 5, Retries exhausted kernel: (da0:umass-sim0:0:0:0): daopen kernel: (da0:umass-sim0:0:0:0): READ CAPACITY(10). CDB: 25 0 0 0 0 0 0 0 0 0 kernel: (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error kernel: (da0:umass-sim0:0:0:0): SCSI status: Check Condition kernel: (da0:umass-sim0:0:0:0): SCSI sense: No sense data present kernel: (da0:umass-sim0:0:0:0): Retrying command (per sense data) kernel: (da0:umass-sim0:0:0:0): READ CAPACITY(10). CDB: 25 0 0 0 0 0 0 0 0 0 kernel: (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error kernel: (da0:umass-sim0:0:0:0): SCSI status: Check Condition kernel: (da0:umass-sim0:0:0:0): SCSI sense: No sense data present kernel: (da0:umass-sim0:0:0:0): Retrying command (per sense data) kernel: (da0:umass-sim0:0:0:0): READ CAPACITY(10). CDB: 25 0 0 0 0 0 0 0 0 0 kernel: (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error kernel: (da0:umass-sim0:0:0:0): SCSI status: Check Condition kernel: (da0:umass-sim0:0:0:0): SCSI sense: No sense data present kernel: (da0:umass-sim0:0:0:0): Retrying command (per sense data) kernel: (da0:umass-sim0:0:0:0): READ CAPACITY(10). CDB: 25 0 0 0 0 0 0 0 0 0 kernel: (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error kernel: (da0:umass-sim0:0:0:0): SCSI status: Check Condition kernel: (da0:umass-sim0:0:0:0): SCSI sense: No sense data present kernel: (da0:umass-sim0:0:0:0): Retrying command (per sense data) kernel: (da0:umass-sim0:0:0:0): READ CAPACITY(10). CDB: 25 0 0 0 0 0 0 0 0 0 kernel: (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error kernel: (da0:umass-sim0:0:0:0): SCSI status: Check Condition kernel: (da0:umass-sim0:0:0:0): SCSI sense: No sense data present kernel: (da0:umass-sim0:0:0:0): Error 5, Retries exhausted kernel: (da0:umass-sim0:0:0:0): got CAM status 0x8c kernel: (da0:umass-sim0:0:0:0): fatal error, failed to attach to device kernel: (da0:umass-sim0:0:0:0): Periph invalidated kernel: (da0:umass-sim0:0:0:0): lost device - 0 outstanding, 4 refs kernel: (da0:umass-sim0:0:0:0): removing device entry kernel: (da0:umass-sim0:0:0:0): Periph destroyed ----- -- WBR, Boris Samorodov (bsam) FreeBSD Committer, http://www.FreeBSD.org The Power To Serve
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4FEABF3D.2010206>