Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 3 Jun 2004 12:44:04 +0200
From:      Francis GUDIN <fgudin@nerim.fr>
To:        freebsd-current@freebsd.org
Subject:   [fgudin@nerim.fr: acd0 freeze with latest -CURRENT]
Message-ID:  <20040603104402.GA59698@teigneux.porcherie.invalid>

next in thread | raw e-mail | index | archive | help
Having nothing back from freebsd-questions, i push it on here...


Thanks in advance,
Francis.

----- Forwarded message from Francis GUDIN <fgudin@nerim.fr> -----

Date: Wed, 2 Jun 2004 01:58:20 +0200
From: Francis GUDIN <fgudin@nerim.fr>
To: freebsd-questions@freebsd.org
User-Agent: Mutt/1.4.2.1i
Subject: acd0 freeze with latest -CURRENT

Hello,

I'm facing a problem which appeared between Apr 26 and today: when using
the DVD drive of my girlie'laptop, mplayer stands frozen after a few
seconds/minutes. I can 'atacontrol reinit 1' and things go on... until
next freeze :-/
Not so a specific mplayer issue: same thing when attempting to vob-copy
with dvdrip.

Laptop model is Compaq Presario 2120EU. You'll find at the end of this
email dmesg, ps when the problem arises, kernel config and pciconf -l.

I just included DDB in a fresh kernel, but couldn't play much with it,
cause IANAC, and especially not wrt the kernel. I'd appreciate if
someone could point me at valuable docs/debugging howto so that i can
provide anyone who'd care with it with useful input.

Last point: the commits from today back to end april on ATA deal with
"autosense" feature -> could someone satisfy my curiosity and explain me
what is it ?

And now, the most useful content:

Script started on Wed Jun  2 01:24:01 2004
%ps ax
  PID  TT  STAT      TIME COMMAND
    0  ??  DLs    0:00,00  (swapper)
    1  ??  SLs    0:00,01 /sbin/init --
    2  ??  DL     0:00,01  (g_event)
    3  ??  DL     0:00,12  (g_up)
    4  ??  DL     0:00,34  (g_down)
    5  ??  DL     0:00,02  (taskqueue)
    6  ??  SL     0:00,03  (acpi_task0)
    7  ??  SL     0:00,01  (acpi_task1)
    8  ??  SL     0:00,05  (acpi_task2)
    9  ??  DL     0:00,00  (cbb0)
   10  ??  DL     0:00,00  (ktrace)
   11  ??  RL     2:45,23  (idle: cpu0)
   12  ??  WL     0:00,00  (irq0: clk)
   13  ??  WL     0:00,00  (irq1: atkbd0)
   14  ??  WL     0:00,00  (irq3:)
   15  ??  WL     0:00,00  (irq4: sio0)
   16  ??  WL     0:00,16  (irq5: pcm0)
   17  ??  WL     0:00,00  (irq6: fdc0)
   18  ??  WL     0:00,00  (irq7: ppc0)
   19  ??  WL     0:00,00  (irq8: rtc)
   20  ??  WL     0:00,00  (irq9: acpi0)
   21  ??  WL     0:00,00  (irq10: fwohci0+)
   22  ??  WL     0:00,69  (irq11: cbb0 sis0)
   23  ??  WL     0:00,01  (irq12: psm0)
   24  ??  WL     0:00,00  (irq13:)
   25  ??  WL     0:00,03  (irq14: ata0)
   26  ??  WL     0:01,00  (irq15: ata1)
   27  ??  WL     0:00,11  (swi8: tty:sio clock)
   28  ??  WL     0:00,00  (swi4: vm)
   29  ??  WL     0:00,29  (swi1: net)
   30  ??  DL     0:00,07  (yarrow)
   31  ??  WL     0:00,00  (swi6:+)
   32  ??  WL     0:00,00  (swi5:+)
   33  ??  WL     0:00,00  (swi7: acpitaskq)
   34  ??  WL     0:00,00  (swi2: camnet)
   35  ??  WL     0:00,00  (swi3: cambio)
   36  ??  WL     0:00,00  (swi7: task queue)
   37  ??  DL     0:00,03  (acpi_thermal)
   38  ??  DL     0:00,00  (usb0)
   39  ??  DL     0:00,00  (usbtask)
   40  ??  WL     0:00,00  (swi0: tty:sio)
   41  ??  DL     0:00,00  (pagedaemon)
   42  ??  DL     0:00,00  (vmdaemon)
   43  ??  DL     0:00,50  (pagezero)
   44  ??  DL     0:00,00  (bufdaemon)
   45  ??  DL     0:00,01  (syncer)
   46  ??  DL     0:00,00  (vnlru)
   47  ??  SL     0:00,00  (nfsiod 0)
   48  ??  SL     0:00,00  (nfsiod 1)
   49  ??  SL     0:00,00  (nfsiod 2)
   50  ??  SL     0:00,00  (nfsiod 3)
  315  ??  Ss     0:00,01 /usr/sbin/syslogd -s
  330  ??  Ss     0:00,01 /usr/sbin/rpcbind
  420  ??  Ss     0:00,00 /usr/sbin/mountd -r
  422  ??  Ss     0:00,03 nfsd: master (nfsd)
  425  ??  S      0:00,57 nfsd: server (nfsd)
  426  ??  S      0:00,02 nfsd: server (nfsd)
  427  ??  S      0:00,00 nfsd: server (nfsd)
  428  ??  S      0:00,00 nfsd: server (nfsd)
  452  ??  Ss     0:00,00 /usr/sbin/usbd
  502  ??  Ss     0:00,00 /usr/sbin/sshd
  508  ??  Ss     0:00,01 sendmail: accepting connections (sendmail)
  512  ??  Ss     0:00,00 sendmail: Queue runner@00:30:00 for /var/spool/mqueue
  515  ??  Ss     0:00,00 sendmail: Queue runner@00:30:00 for /var/spool/client
  529  ??  Ss     0:00,00 /usr/sbin/cron -s
  558  ??  Ss     0:00,03 /usr/local/sbin/cupsd
  586  ??  Ss     0:00,01 sudoscriptd: main (perl)
  588  ??  Ss     0:00,00 sudoscriptd: merger (perl)
  637  ??  S      0:00,02 /usr/X11R6/bin/wdm -nodaemon ttyv8
  638  ??  S      0:00,11 /usr/X11R6/bin/wdm -nodaemon ttyv8
  641  ??  Ss     0:05,08 /usr/X11R6/bin/XFree86 -auth /usr/X11R6/lib/X11/wdm/a
  642  ??  Ss     0:00,01 /usr/X11R6/bin/wdm -nodaemon ttyv8
  657  ??  Ss     0:00,19 /usr/X11R6/bin/wmaker
  675  ??  S      0:00,14 wmxmms
  676  ??  S      0:00,06 wmbsdbatt
  677  ??  S      0:00,04 wmtime
  678  ??  S      0:00,01 /usr/X11R6/bin/xconsole -geometry 480x130-0-0 -daemon
  682  ??  S      0:00,07 xterm -sl 1000
  703  ??  Ss     0:00,02 sshd: doudou [priv] (sshd)
  705  ??  R      0:00,01 sshd: doudou@ttyp2 (sshd)
  683  p1  Ss     0:00,02 csh
  684  p1  S+     0:01,21 mplayer -vo x11 -ao oss -double -cache 8192 -zoom -dv
  698  p1  DL+    0:00,08 mplayer -vo x11 -ao oss -double -cache 8192 -zoom -dv
  706  p2  Ss     0:00,02 -csh (csh)
  721  p2  S+     0:00,00 script debug_infos
  722  p3  Ss     0:00,01 /bin/csh -i
  723  p3  R+     0:00,00 ps ax
  629  v0  Ss+    0:00,00 /usr/libexec/getty Pc ttyv0
  630  v1  Ss+    0:00,00 /usr/libexec/getty Pc ttyv1
  631  v2  Ss+    0:00,00 /usr/libexec/getty Pc ttyv2
  632  v3  Ss+    0:00,00 /usr/libexec/getty Pc ttyv3
  633  v4  Ss+    0:00,00 /usr/libexec/getty Pc ttyv4
  634  v5  Ss+    0:00,00 /usr/libexec/getty Pc ttyv5
  635  v6  Ss+    0:00,00 /usr/libexec/getty Pc ttyv6
  636  v7  Ss+    0:00,00 /usr/libexec/getty Pc ttyv7

%sudo atacontrol reinit 1
Master: acd0 <SD-R2512/1A04> ATA/ATAPI revision 5
Slave:       no device present

%dmesg
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #1: Wed Jun  2 01:17:36 CEST 2004
    root@sigmund.porcherie.invalid:/usr/obj/usr/HEAD/src/sys/SIGMUND
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0886000.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc088621c.
Preloaded elf module "/boot/kernel/snd_t4dwave.ko" at 0xc08862c8.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc0886378.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0886424.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: mobile AMD Athlon(tm) XP2500+ (1855.20-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x6a0  Stepping = 0
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!>
real memory  = 200212480 (190 MB)
avail memory = 186236928 (177 MB)
random: <entropy source, Software, Yarrow>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD   RSDT> on motherboard
acpi0: [GIANT-LOCKED]
pcibios: BIOS version 2.10
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
cpu0: <ACPI CPU (2 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 2 INTA is routed to irq 10
pcib0: slot 6 INTA is routed to irq 5
pcib0: slot 8 INTA is routed to irq 10
pcib0: slot 10 INTA is routed to irq 11
pcib0: slot 12 INTA is routed to irq 10
pcib0: slot 18 INTA is routed to irq 11
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib1: slot 5 INTA is routed to irq 10
pci1: <display, VGA> at device 5.0 (no driver attached)
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xd0004000-0xd0004fff irq 10 at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pcm0: <Acer Labs M5451> port 0x8400-0x84ff mem 0xd0005000-0xd0005fff irq 5 at device 6.0 on pci0
pcm0: <Conexant CX20468 AC97 Codec>
pcm0: [GIANT-LOCKED]
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <simple comms> at device 8.0 (no driver attached)
cbb0: <O2Micro OZ6912/6972 PCI-CardBus Bridge> irq 11 at device 10.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fwohci0: vendor=104c, dev=8026
fwohci0: <1394 Open Host Controller Interface> mem 0xd0000000-0xd0003fff,0xd0007000-0xd00077ff irq 10 at device 12.0 on pci0
fwohci0: [GIANT-LOCKED]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:0d:9d:71:9e:81:40:73
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:0d:9d:81:40:73
fwe0: Ethernet address: 02:0d:9d:81:40:73
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, Not found IRM capable node
atapci0: <AcerLabs Aladdin UDMA100 controller> port 0x8080-0x808f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 16.0 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <bridge, PCI-unknown> at device 17.0 (no driver attached)
sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0x8c00-0x8cff mem 0xd0008000-0xd0008fff irq 11 at device 18.0 on pci0
sis0: Silicon Revision: DP83816A
miibus0: <MII bus> on sis0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: Ethernet address: 00:0d:9d:82:bc:f6
sis0: [GIANT-LOCKED]
acpi_button0: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Synaptics Touchpad, device ID 0
acpi_ec0: <Embedded Controller: GPE 0x18> port 0x66,0x62 on acpi0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 0 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
orm0: <Option ROMs> at iomem 0xdc000-0xdffff,0xdb000-0xdbfff,0xcf000-0xcf7ff,0xc0000-0xcefff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1855196045 Hz quality 800
Timecounters tick every 10.000 msec
ad0: 38154MB <TOSHIBA MK4025GAS> [77520/16/63] at ata0-master UDMA100
acd0: CDRW <SD-R2512> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
mousgetinfo model: 13mousgetinfo model: 13    ACPI-0502: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
    ACPI-1303: *** Error: Method execution failed [\\_TZ_.THRM._TMP] (Node 0xc1479600), AE_NO_HARDWARE_RESPONSE

%cat /usr/HEAD/src/sys/i386/conf/SIGMUND 
#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
#    http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.398 2004/03/15 00:49:40 obrien Exp $

machine		i386
cpu		I686_CPU
ident		SIGMUND

# To statically compile in device wiring instead of /boot/device.hints
#hints		"GENERIC.hints"		# Default places to look for devices.

makeoptions	DEBUG=-g		# Build kernel with gdb(1) debug symbols

options		DDB
options		DDB_UNATTENDED

options 	SCHED_ULE		# ULE scheduler
options 	INET			# InterNETworking
options 	INET6			# IPv6 communications protocols
options 	FFS			# Berkeley Fast Filesystem
options 	SOFTUPDATES		# Enable FFS soft updates support
options 	UFS_ACL			# Support for access control lists
options 	UFS_DIRHASH		# Improve performance on big directories
options 	MD_ROOT			# MD is a potential root device
options 	NFSCLIENT		# Network Filesystem Client
options 	NFSSERVER		# Network Filesystem Server
options 	NFS_ROOT		# NFS usable as /, requires NFSCLIENT
options 	MSDOSFS			# MSDOS Filesystem
options 	CD9660			# ISO 9660 Filesystem
options 	PROCFS			# Process filesystem (requires PSEUDOFS)
options 	PSEUDOFS		# Pseudo-filesystem framework
options 	COMPAT_43		# Compatible with BSD 4.3 [KEEP THIS!]
options 	COMPAT_FREEBSD4		# Compatible with FreeBSD4
options 	SCSI_DELAY=15000	# Delay (in ms) before probing SCSI
options 	KTRACE			# ktrace(1) support
options 	SYSVSHM			# SYSV-style shared memory
options 	SYSVMSG			# SYSV-style message queues
options 	SYSVSEM			# SYSV-style semaphores
options 	_KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev

# Debugging for use in -current
options 	DDB			# Enable the kernel debugger
# options 	INVARIANTS		# Enable calls of extra sanity checking
# options 	INVARIANT_SUPPORT	# Extra sanity checks of internal structures, required by INVARIANTS
# options 	WITNESS			# Enable checks to detect deadlocks and cycles
# options 	WITNESS_SKIPSPIN	# Don't run witness on spinlocks for speed

# To make an SMP kernel, the next two are needed
options 	SMP		# Symmetric MultiProcessor Kernel
device		apic		# I/O APIC

device		isa
device		eisa
device		pci

# Floppy drives
device		fdc

# ATA and ATAPI devices
device		ata
device		atadisk		# ATA disk drives
device		atapicd		# ATAPI CDROM drives
device		atapifd		# ATAPI floppy drives
options 	ATA_STATIC_ID	# Static device numbering

# SCSI peripherals
device		scbus		# SCSI bus (required for SCSI)
device		ch		# SCSI media changers
device		da		# Direct Access (disks)
device		cd		# CD
device		pass		# Passthrough device (direct SCSI access)
device		ses		# SCSI Environmental Services (and SAF-TE)

# atkbdc0 controls both the keyboard and the PS/2 mouse
device		atkbdc		# AT keyboard controller
device		atkbd		# AT keyboard
device		psm		# PS/2 mouse

device		vga		# VGA video card driver

# syscons is the default console driver, resembling an SCO console
device		sc

# Enable this for the pcvt (VT220 compatible) console driver
#device		vt
#options 	XSERVER		# support for X server on a vt console
#options 	FAT_CURSOR	# start with block cursor

device		agp		# support several AGP chipsets

# Floating point support - do not disable.
device		npx

# Add suspend/resume support for the i8254.
device		pmtimer

# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
device		cbb		# cardbus (yenta) bridge
#device		pcic		# ExCA ISA and PCI bridges
device		pccard		# PC Card (16-bit) bus
device		cardbus		# CardBus (32-bit) bus

# Serial (COM) ports
device		sio		# 8250, 16[45]50 based serial ports

# Parallel port
device		ppc
device		ppbus		# Parallel port bus (required)
device		lpt		# Printer

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device		miibus		# MII bus support
device		sis		# Silicon Integrated Systems SiS 900/SiS 7016

# Pseudo devices - the number indicates how many units to allocate.
device		random		# Entropy device
device		loop		# Network loopback
device		ether		# Ethernet support
device		sl		# Kernel SLIP
device		tun		# Packet tunnel.
device		pty		# Pseudo-ttys (telnet etc)
device		md		# Memory "disks"

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device		bpf		# Berkeley packet filter

# USB support
device		uhci		# UHCI PCI->USB interface
device		ohci		# OHCI PCI->USB interface
device		usb		# USB Bus (required)
#device		udbp		# USB Double Bulk Pipe devices
device		ugen		# Generic
device		uhid		# "Human Interface Devices"
device		ukbd		# Keyboard
device		ulpt		# Printer
device		umass		# Disks/Mass storage - Requires scbus and da
device		ums		# Mouse
device		urio		# Diamond Rio 500 MP3 player
device		uscanner	# Scanners

# FireWire support
device		firewire	# FireWire bus code
device		sbp		# SCSI over FireWire (Requires scbus and da)
device		fwe		# Ethernet over FireWire (non-standard!)

%pciconf -l 
hostb0@pci0:0:0:	class=0x060000 card=0x00000000 chip=0xcab01002 rev=0x13 hdr=0x00
pcib1@pci0:1:0:	class=0x060400 card=0x00000000 chip=0x700f1002 rev=0x01 hdr=0x01
ohci0@pci0:2:0:	class=0x0c0310 card=0x0024103c chip=0x523710b9 rev=0x03 hdr=0x00
pcm0@pci0:6:0:	class=0x040100 card=0x0024103c chip=0x545110b9 rev=0x02 hdr=0x00
isab0@pci0:7:0:	class=0x060100 card=0x153310b9 chip=0x153310b9 rev=0x00 hdr=0x00
none0@pci0:8:0:	class=0x070300 card=0x0024103c chip=0x545710b9 rev=0x00 hdr=0x00
cbb0@pci0:10:0:	class=0x060700 card=0x00000000 chip=0x69721217 rev=0x00 hdr=0x02
fwohci0@pci0:12:0:	class=0x0c0010 card=0x0024103c chip=0x8026104c rev=0x00 hdr=0x00
atapci0@pci0:16:0:	class=0x0101b0 card=0x0024103c chip=0x522910b9 rev=0xc4 hdr=0x00
none1@pci0:17:0:	class=0x068000 card=0x0024103c chip=0x710110b9 rev=0x00 hdr=0x00
sis0@pci0:18:0:	class=0x020000 card=0x0024103c chip=0x0020100b rev=0x00 hdr=0x00
none2@pci1:5:0:	class=0x030000 card=0x0024103c chip=0x43361002 rev=0x00 hdr=0x00
%exit
exit

Script done on Wed Jun  2 01:26:13 2004


Thank you very much for any help,

Francis.

PS: not currently subscribed to this list, please CC: me on replies.

----- End forwarded message -----



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040603104402.GA59698>