Date: Wed, 13 Oct 2004 13:19:50 +0200 From: Peter Gade Jensen <rhazn@daimi.au.dk> To: freebsd-current@freebsd.org Subject: [5.3BETA7] ad0 gone after suspend/resume cycle Message-ID: <20041013111950.GA31908@ec10.daimi.au.dk>
next in thread | raw e-mail | index | archive | help
--u3/rZRmxL6MmkK24 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline I've been seeing this little feature ever since ATAng was introduced and also reported it back then, but didn't get any real response. Properly my own fault for not being precise enough. :-) But I better try again before 5.3 goes stable. The subject at hand is an 'old' Toshiba Satellite Pro 6000(dmesg attached) and FreeBSD5.3BETA7 GENERIC kernel+debugging. When I suspend with 'acpiconf -s 3' and afterwards resumes, ad0 is removed with the message: "ad0: WARNING - removed from configuration." Trying to track down why this happens, I've come so far that ata-all.c:ata_identify_devices(ata_channel*) doesn't find anything after the resume. So, ata-all.c:ata_reinit(ata_channel*) starts by detaching the devices that were lost during reset(this means ad0), then detaches the devices that were lost during identify(none) and finally attaching the devices that were found by ata_identify_devices(I'm guessing here?). In this case none. The above is properly a wrong interpretation of the code, but I'm new at this, so be nice. :o) The question then is: why is my drive lost? I can't be helpful with a dump, because 1) the laptop doesn't panic() and 2) it's kind of hard to doadump without a configured drive. :o) This might not even be something wrong with ATA, but I don't know whereelse to look. This is output when resuming with verbose boot: ata0: reiniting channel .. ata0: reset tp1 mask=03 ostat0=80 ostat1=80 ad0: stat=0x80 err=0x80 lsb=0x80 msb=0x80 ad0: stat=0x80 err=0x80 lsb=0x80 msb=0x80 ad0: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0 ad0: stat=0x50 err=0x00 lsb=0xfe msb=0x3f ata0-slave: stat=0x00 err=0x00 lsb=0xfe msb=0x3f ata0: reset tp2 stat0=50 stat1=00 devices=0x0 ata0: resetting done .. ad0: WARNING - removed from configuration ata0: device config done .. and the backtrace, when forcing a panic after the call to ata_reinit in ata_resume: db> trace kdb_enter(c0684e14) at kdb_enter+0x2b panic(c06716ac,c152e600,c152e600,c067169c,c155ec00) at panic+0x127 ata_resume(c155ec00) at ata_resume+0x3a bus_generic_resume(c1564280) at bus_generic_resume+0x42 bus_generic_resume(c155d700,c18efc40,c06ba5e0,c18efc40,b) at bus_generic_resume+0x42 pci_resume(c155d700) at pci_resume+0x57 bus_generic_resume(c1530100,c1530100,c1530100,cbe92ac4,c07f8b2b) at bus_generic_resume+0x42 acpi_pcib_resume(c1530100,cbe92ad8,c05062d2,c1530100,c1530980) at acpi_pcib_resume+0x13 acpi_pcib_acpi_resume(c1530100) at acpi_pcib_acpi_resume+0xb bus_generic_resume(c1530980) at bus_generic_resume+0x42 bus_generic_resume(c1530b00) at bus_generic_resume+0x42 bus_generic_resume(c14a7000,4,75003,16,80045003) at bus_generic_resume+0x42 acpi_SetSleepState(c1530900,3,1,cbe92b88,c06e42d8) at acpi_SetSleepState+0x2a0 acpiioctl(c06e42d8,80045003,cbe92c60,3,c1558960) at acpiioctl+0xa3 spec_ioctl(cbe92b88,cbe92c34,c054c1db,cbe92b88,c06db020) at spec_ioctl+0xd7 spec_vnoperate(cbe92b88) at spec_vnoperate+0x13 vn_ioctl(c190e088,80045003,cbe92c60,c190ae80,c1558960) at vn_ioctl+0x19f ioctl(c1558960,cbe92d14,3,1,292) at ioctl+0x3e0 syscall(2f,2f,2f,bfbfedc0,3) at syscall+0x213 Xint0x80_syscall() at Xint0x80_syscall+0x1f I don't know if this is enough, but let me know if you need more information. Thanks, Peter -- "What I like most about myself is that I'm so understanding when I mess things up." --u3/rZRmxL6MmkK24 Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=dmesg3 Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-BETA7 #3: Tue Oct 12 22:02:51 CEST 2004 pgj@aki.playah.dk:/usr/obj/usr/5.0/sys/GENDEBUG WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "/boot/kernel/kernel" at 0xc0822000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc08222bc. Calibrating clock(s) ... i8254 clock: 1193194 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 995965495 Hz CPU: Intel(R) Pentium(R) III Mobile CPU 1000MHz (995.97-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 251002880 (239 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c29000 - 0x000000000eaf9fff, 233639936 bytes (57041 pages) avail memory = 236081152 (225 MB) bios32: Found BIOS32 Service Directory header at 0xc00f00b0 bios32: Entry = 0xf98e9 (c00f98e9) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0x97ab pnpbios: Found PnP BIOS data at 0xc00f0260 pnpbios: Entry = f0000:8d8 Rev = 1.0 pnpbios: Event flag at 510 pnpbios: OEM ID c936f351 Other BIOS signatures found: wlan: <802.11 Link Layer> random: <entropy source, Software, Yarrow> io: <I/O> mem: <memory> Pentium Pro MTRR support enabled null: <null device, zero device> npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <TOSHIB 750> on motherboard pci_open(1): mode 1 addr port (0x0cf8) is 0x80000090 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=164410b9) pcibios: BIOS version 2.10 Found $PIR table, 7 entries at 0xc00f01d0 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 2 A 0x59 11 embedded 0 6 A 0x08 11 embedded 0 17 A 0x01 11 embedded 0 17 B 0x02 11 embedded 0 10 A 0x04 11 embedded 1 0 A 0x03 11 embedded 0 16 A 0x03 11 embedded 0 16 B 0x04 11 embedded 0 18 A 0x01 11 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 16 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 16 func 1 acpi0: [MPSAFE] acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 7 func 0 acpi0: Power Button (fixed) ACPI timer looks BAD min = 2, max = 7, width = 5 ACPI timer looks BAD min = 2, max = 7, width = 5 ACPI timer looks BAD min = 2, max = 7, width = 5 ACPI timer looks BAD min = 2, max = 7, width = 5 ACPI timer looks BAD min = 3, max = 7, width = 4 ACPI timer looks BAD min = 2, max = 7, width = 5 ACPI timer looks BAD min = 2, max = 7, width = 5 ACPI timer looks BAD min = 2, max = 7, width = 5 ACPI timer looks BAD min = 2, max = 7, width = 5 ACPI timer looks BAD min = 2, max = 7, width = 5 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xee08-0xee0b on acpi0 cpu0: <ACPI CPU (3 Cx states)> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ACPI PCI link initial configuration: \\_SB_.PCI0.FNC0.LNKA irq 0: [ 3 4 5 6 7 10 11] 11+ low,level,sharable 0.17.0 \\_SB_.PCI0.FNC0.LNKB irq 0: [ 3 4 5 6 7 10 11] 11+ low,level,sharable 0.17.1 \\_SB_.PCI0.FNC0.LNKD irq 0: [ 3 4 5 6 7 10 11] 11+ low,level,sharable 0.10.0 \\_SB_.PCI0.FNC0.LNKC irq 0: [ 3 4 5 6 7 10 11] 11+ low,level,sharable 0.16.0 \\_SB_.PCI0.FNC0.LNKD irq 0: [ 3 4 5 6 7 10 11] 11+ low,level,sharable 0.16.1 \\_SB_.PCI0.FNC0.LNKH irq 0: [ 3 4 5 6 7 10 11] 11+ low,level,sharable 0.6.0 \\_SB_.PCI0.FNC0.LNKA irq 0: [ 3 4 5 6 7 10 11] 11+ low,level,sharable 0.18.0 \\_SB_.PCI0.FNC0.LNKG irq 0: [ 3 4 5 6 7 10 11] 11+ low,level,sharable 0.2.0 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base f0000000, size 26, enabled found-> vendor=0x10b9, dev=0x1644, revid=0x01 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0xa210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 1 supports D0 D3 current D0 found-> vendor=0x10b9, dev=0x5247, revid=0x00 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0400, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) map[10]: type 1, range 32, base f7eff000, size 12, enabled pcib0: matched entry for 0.2.INTA (src \\_SB_.PCI0.FNC0.LNKG) pcib0: possible interrupts: 3 4 5 6 7 10 11 ACPI PCI link arbitrated settings: \\_SB_.PCI0.FNC0.LNKA (references 2, priority 5888): interrupts: 11 10 5 7 6 4 3 penalty: 80 80 130 5080 5080 5080 5080 \\_SB_.PCI0.FNC0.LNKD (references 2, priority 5888): interrupts: 11 10 5 7 6 4 3 penalty: 80 80 130 5080 5080 5080 5080 \\_SB_.PCI0.FNC0.LNKB (references 1, priority 2944): interrupts: 11 10 5 7 6 4 3 penalty: 80 80 130 5080 5080 5080 5080 \\_SB_.PCI0.FNC0.LNKC (references 1, priority 2944): interrupts: 11 10 5 7 6 4 3 penalty: 80 80 130 5080 5080 5080 5080 \\_SB_.PCI0.FNC0.LNKH (references 1, priority 2944): interrupts: 11 10 5 7 6 4 3 penalty: 80 80 130 5080 5080 5080 5080 \\_SB_.PCI0.FNC0.LNKG (references 1, priority 2944): interrupts: 11 10 5 7 6 4 3 penalty: 80 80 130 5080 5080 5080 5080 pcib0: slot 2 INTA routed to irq 11 via \\_SB_.PCI0.FNC0.LNKG found-> vendor=0x10b9, dev=0x5237, revid=0x03 bus=0, slot=2, func=0 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 0000eff0, size 4, enabled found-> vendor=0x10b9, dev=0x5229, revid=0xc3 bus=0, slot=4, func=0 class=01-01-f0, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 0000ed00, size 8, enabled map[14]: type 1, range 32, base f7efe000, size 12, enabled pcib0: matched entry for 0.6.INTA (src \\_SB_.PCI0.FNC0.LNKH) pcib0: possible interrupts: 3 4 5 6 7 10 11 ACPI PCI link arbitrated settings: \\_SB_.PCI0.FNC0.LNKA (references 2, priority 6051): interrupts: 10 11 5 7 6 4 3 penalty: 160 170 210 5160 5160 5160 5160 \\_SB_.PCI0.FNC0.LNKD (references 2, priority 6051): interrupts: 10 11 5 7 6 4 3 penalty: 160 170 210 5160 5160 5160 5160 \\_SB_.PCI0.FNC0.LNKB (references 1, priority 3025): interrupts: 10 11 5 7 6 4 3 penalty: 160 170 210 5160 5160 5160 5160 \\_SB_.PCI0.FNC0.LNKC (references 1, priority 3025): interrupts: 10 11 5 7 6 4 3 penalty: 160 170 210 5160 5160 5160 5160 \\_SB_.PCI0.FNC0.LNKH (references 1, priority 3025): interrupts: 10 11 5 7 6 4 3 penalty: 160 170 210 5160 5160 5160 5160 pcib0: slot 6 INTA routed to irq 11 via \\_SB_.PCI0.FNC0.LNKH found-> vendor=0x10b9, dev=0x5451, revid=0x01 bus=0, slot=6, func=0 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x18 (6000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 found-> vendor=0x10b9, dev=0x1533, revid=0x00 bus=0, slot=7, func=0 class=06-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x000f, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 1 supports D0 D3 current D0 found-> vendor=0x10b9, dev=0x7101, revid=0x00 bus=0, slot=8, func=0 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 1, range 32, base f7efd000, size 12, enabled map[14]: type 4, range 32, base 0000eb40, size 6, enabled map[18]: type 1, range 32, base f7ec0000, size 17, enabled pcib0: matched entry for 0.10.INTA (src \\_SB_.PCI0.FNC0.LNKD) pcib0: possible interrupts: 3 4 5 6 7 10 11 ACPI PCI link arbitrated settings: \\_SB_.PCI0.FNC0.LNKA (references 2, priority 6214): interrupts: 10 11 5 7 6 4 3 penalty: 240 260 290 5240 5240 5240 5240 \\_SB_.PCI0.FNC0.LNKD (references 2, priority 6214): interrupts: 10 11 5 7 6 4 3 penalty: 240 260 290 5240 5240 5240 5240 \\_SB_.PCI0.FNC0.LNKB (references 1, priority 3107): interrupts: 10 11 5 7 6 4 3 penalty: 240 260 290 5240 5240 5240 5240 \\_SB_.PCI0.FNC0.LNKC (references 1, priority 3107): interrupts: 10 11 5 7 6 4 3 penalty: 240 260 290 5240 5240 5240 5240 pcib0: slot 10 INTA routed to irq 11 via \\_SB_.PCI0.FNC0.LNKD found-> vendor=0x8086, dev=0x1229, revid=0x0d bus=0, slot=10, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 00000000, size 12, memory disabled found-> vendor=0x1179, dev=0x0617, revid=0x32 bus=0, slot=17, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0000, statreg=0x0490, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 1 supports D0 D3 current D0 map[10]: type 1, range 32, base 00000000, size 12, memory disabled found-> vendor=0x1179, dev=0x0617, revid=0x32 bus=0, slot=17, func=1 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0000, statreg=0x0490, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 powerspec 1 supports D0 D3 current D0 map[10]: type 1, range 32, base f7ebfe00, size 9, enabled pcib0: matched entry for 0.18.INTA (src \\_SB_.PCI0.FNC0.LNKA) pcib0: possible interrupts: 3 4 5 6 7 10 11 ACPI PCI link arbitrated settings: \\_SB_.PCI0.FNC0.LNKA (references 2, priority 6380): interrupts: 10 11 5 7 6 4 3 penalty: 320 360 370 5320 5320 5320 5320 \\_SB_.PCI0.FNC0.LNKB (references 1, priority 3190): interrupts: 10 11 5 7 6 4 3 penalty: 320 360 370 5320 5320 5320 5320 \\_SB_.PCI0.FNC0.LNKC (references 1, priority 3190): interrupts: 10 11 5 7 6 4 3 penalty: 320 360 370 5320 5320 5320 5320 pcib0: slot 18 INTA routed to irq 11 via \\_SB_.PCI0.FNC0.LNKA found-> vendor=0x1179, dev=0x0805, revid=0x03 bus=0, slot=18, func=0 class=08-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 agp0: <Ali Generic host to PCI bridge> mem 0xf0000000-0xf3ffffff at device 0.0 on pci0 agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xf0000000 agp0: allocating GATT for aperture of size 64M pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xf7f00000-0xfdffffff pcib1: prefetched decode 0xfff00000-0xfffff ACPI PCI link initial configuration: \\_SB_.PCI0.FNC0.LNKC irq 0: [ 3 4 5 6 7 10 11] 11+ low,level,sharable 1.0.0 pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=1 map[10]: type 1, range 32, base fc000000, size 25, enabled pcib1: device (null) requested decoded memory range 0xfc000000-0xfdffffff map[14]: type 1, range 32, base fbc00000, size 22, enabled pcib1: device (null) requested decoded memory range 0xfbc00000-0xfbffffff map[18]: type 1, range 32, base f8000000, size 25, enabled pcib1: device (null) requested decoded memory range 0xf8000000-0xf9ffffff map[1c]: type 1, range 32, base f7ff8000, size 15, enabled pcib1: device (null) requested decoded memory range 0xf7ff8000-0xf7ffffff pcib1: matched entry for 1.0.INTA (src \\_SB_.PCI0.FNC0.LNKC) pcib1: possible interrupts: 3 4 5 6 7 10 11 ACPI PCI link arbitrated settings: \\_SB_.PCI0.FNC0.LNKC (references 2, priority 6425): interrupts: 10 5 11 7 6 4 3 penalty: 340 390 400 5340 5340 5340 5340 \\_SB_.PCI0.FNC0.LNKB (references 1, priority 3212): interrupts: 10 5 11 3 4 6 7 penalty: 340 390 400 5340 5340 5340 5340 pcib1: slot 0 INTA routed to irq 11 via \\_SB_.PCI0.FNC0.LNKC found-> vendor=0x1023, dev=0x8820, revid=0x82 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 pci1: <display, VGA> at device 0.0 (no driver attached) ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xf7eff000-0xf7efffff irq 11 at device 2.0 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf7eff000 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered atapci0: <AcerLabs Aladdin UDMA66 controller> port 0xeff0-0xefff,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 4.0 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xeff0 ata0: channel #0 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0: [MPSAFE] ata1: channel #1 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ata1: [MPSAFE] pci0: <multimedia, audio> at device 6.0 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 pci0: <bridge, PCI-unknown> at device 8.0 (no driver attached) fxp0: <Intel 82550 Pro/100 Ethernet> port 0xeb40-0xeb7f mem 0xf7ec0000-0xf7edffff,0xf7efd000-0xf7efdfff irq 11 at device 10.0 on pci0 fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf7efd000 fxp0: using memory space register mapping fxp0: PCI IDs: 8086 1229 1179 0001 000d fxp0: Dynamic Standby mode is disabled miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: bpf attached fxp0: Ethernet address: 00:00:39:73:e5:b8 fxp0: [MPSAFE] cbb0: <ToPIC100 PCI-CardBus Bridge> at device 17.0 on pci0 cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xfe000000 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib0: matched entry for 0.17.INTA (src \\_SB_.PCI0.FNC0.LNKA) pcib0: slot 17 INTA is already routed to irq 11 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0x06171179 0x04900007 0x06070032 0x00824000 0x10: 0xfe000000 0x04800080 0x00030300 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc 0x30: 0x00000000 0x0000fffc 0x00000000 0x0400010b 0x40: 0x00011179 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00010001 0x00800000 0x00000000 0x01000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x860011f0 0x0c000000 0x00008000 0x0000d100 0xb0: 0x3f3f3fcf 0x0a081020 0x10010100 0x00023f00 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00040000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000008 cbb1: <ToPIC100 PCI-CardBus Bridge> at device 17.1 on pci0 cbb1: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xfe001000 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pcib0: matched entry for 0.17.INTB (src \\_SB_.PCI0.FNC0.LNKB) pcib0: possible interrupts: 3 4 5 6 7 10 11 ACPI PCI link arbitrated settings: \\_SB_.PCI0.FNC0.LNKB (references 1, priority 3307): interrupts: 10 5 11 7 6 4 3 penalty: 420 470 580 5420 5420 5420 5420 pcib0: slot 17 INTB routed to irq 11 via \\_SB_.PCI0.FNC0.LNKB cbb1: [MPSAFE] cbb1: PCI Configuration space: 0x00: 0x06171179 0x04900007 0x06070032 0x00824000 0x10: 0xfe001000 0x04800080 0x00040400 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc 0x30: 0x00000000 0x0000fffc 0x00000000 0x0400020b 0x40: 0x00011179 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00010001 0x00800000 0x00000000 0x01000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x860021f0 0x0c000000 0x00000000 0x0000d100 0xb0: 0x3f3f3fcf 0x0a081020 0x10010100 0x00023f00 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00040000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000008 pci0: <base peripheral> at device 18.0 (no driver attached) unknown: not probed (disabled) acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_cmbat0: <Control Method Battery> on acpi0 acpi_cmbat1: <Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 unknown: not probed (disabled) atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ psmcpnp0 irq 12 on acpi0 psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3-00, 3 buttons psm0: config:00000000, flags:00000008, packet size:4 psm0: syncmask:08, syncbits:00 sio0: irq maps: 0x201 0x211 0x201 0x201 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A, console ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0 port 0x778-0x77a,0x378-0x37a irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/15 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 plip0: bpf attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sc: sc0 already exists; skipping it sio: sio0 already exists; skipping it vga: vga0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xe0000-0xeffff,0xc0000-0xcbfff on isa0 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x0> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 04 b0 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0-0x3f5 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x201 0x201 0x201 0x201 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 995965495 Hz quality 800 Timecounters tick every 10.000 msec lo0: bpf attached acpi_cmbat0: battery initialization start acpi_cmbat0: battery initialization done, tried 1 times acpi_cmbat1: battery initialization start acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata0-master: setting PIO4 on AcerLabs Aladdin chip ata0-master: setting UDMA66 on AcerLabs Aladdin chip ad0: <TOSHIBA MK2018GAP/M1.42 A> ATA-5 disk at ata0-master ad0: 19077MB (39070080 sectors), 38760 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA66 GEOM: new disk ad0 [0] f:00 typ:7 s(CHS):0/1/1 e(CHS):1023/5/63 s:63 l:24579387 [1] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/15/63 s:24579450 l:14490630 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s1, start 32256 length 12584646144 end 12584678399 GEOM: Configure ad0s2, start 12584678400 length 7419202560 end 20003880959 GEOM: Configure ad0s2a, start 0 length 1073741824 end 1073741823 GEOM: Configure ad0s2b, start 1073741824 length 536870912 end 1610612735 GEOM: Configure ad0s2c, start 0 length 7419202560 end 7419202559 GEOM: Configure ad0s2d, start 1610612736 length 5808589824 end 7419202559 Mounting root from ufs:/dev/ad0s2a start_init: trying /sbin/init --u3/rZRmxL6MmkK24--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20041013111950.GA31908>