Date: Sat, 12 Jul 2014 01:30:45 +0200 From: "Old Fart" <flyfisheroregon@mail.com> To: freebsd-acpi@freebsd.org Subject: Re: HP Compaq 8710W Battery status problems Message-ID: <trinity-73487570-f99f-4d1d-88ee-8d526e64f333-1405121444555@3capp-mailcom-lxa02> In-Reply-To: <53BF0648.40602@att.net> References: <trinity-01424929-8278-4441-9bc7-5062a0e8e435-1404925956448@3capp-mailcom-lxa06>, <53BF0648.40602@att.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Sent: Thursday, July 10, 2014 at 2:31 PM From: "Anthony Jenkins" <Anthony.B.Jenkins@att.net> To: "Ron Freidel" <flyfisheroregon@mail.com>, freebsd-acpi@freebsd.org Subject: Re: HP Compaq 8710W Battery status problems <snip> > Plugged in and fully charged.... > acpiconf -i batt Isn't this supposed to be 'acpiconf -i 0' and 'acpiconf -i 1'? On my machine the two commands (-i 0 & -i batt) deliver identical information, when I posted originally I was tired and bleary eyed/headed... <snip> [ajenkins@ajenkins-hplaptop /usr/src/sys]$ acpiconf -i 1 acpiconf: get battery info (1) failed: Device not configured Here's the output of acpiconf-i 1 [ronf@mobile] ~% acpiconf -i 1 Design capacity: 0 mWh Last full capacity: 0 mWh Technology: primary (non-rechargeable) Design voltage: 0 mV Capacity (warn): 0 mWh Capacity (low): 0 mWh Low/warn granularity: 0 mWh Warn/full granularity: 0 mWh Model number: Serial number: Type: OEM info: State: not present Present voltage: unknown Just for giggles I did run acpiconf -i 0 & -i 1 without the battery installed, saw this... [ronf@mobile] ~% acpiconf -i 0 Design capacity: unknown Last full capacity: unknown Technology: secondary (rechargeable) Design voltage: unknown Capacity (warn): 0 mWh Capacity (low): 0 mWh Low/warn granularity: 0 mWh Warn/full granularity: 0 mWh Model number: Serial number: Type: OEM info: State: not present Present voltage: unknown [ronf@mobile] ~% acpiconf -i 1 Design capacity: 0 mWh Last full capacity: 0 mWh Technology: primary (non-rechargeable) Design voltage: 0 mV Capacity (warn): 0 mWh Capacity (low): 0 mWh Low/warn granularity: 0 mWh Warn/full granularity: 0 mWh Model number: Serial number: Type: OEM info: State: not present Present voltage: unknown Apparently if my sysapses are firing correctly, the os is seeing the laptops main battery as secondary and a non existant battery as primary.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?trinity-73487570-f99f-4d1d-88ee-8d526e64f333-1405121444555>