Date: Fri, 14 Aug 2009 18:47:48 -0600 From: Tim Judd <tajudd@gmail.com> To: =?ISO-8859-1?Q?Fernando_Apestegu=EDa?= <fernando.apesteguia@gmail.com> Cc: User Questions <freebsd-questions@freebsd.org> Subject: Re: 7.2 burncd and cdrecord problem Message-ID: <ade45ae90908141747v5fa404f2x90466009424b3d0f@mail.gmail.com> In-Reply-To: <1bd550a00908141123l2b51d36byc7c54395d717c9@mail.gmail.com> References: <1bd550a00908141123l2b51d36byc7c54395d717c9@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
First thing I'd suspect is that your drive is a read-only, write-only, but no rewrite, so that means it's unable to blank RW medium. The 'DVDR' and CDDVDW both indicate a write once kind of mindset. does the bezel on the drive itself say rewrite anywhere? --TJ On 8/14/09, Fernando Apestegu=EDa <fernando.apesteguia@gmail.com> wrote: > Hi all, > > I'm trying to get my CD drive to work without so much success. > Reading is fine, but when I try to burn a CD I get errors in dmesg. > > Using cdrecord -blank=3Dfast dev=3D3,0,0 I get: > > [...] > Using generic SCSI-3/mmc CD-ROM driver (mmc_cd). > Driver flags : MMC-3 SWABAUDIO BURNFREE > Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R9= 6R > Starting to write CD/DVD at speed 18 in real BLANK mode for single sessio= n. > Last chance to quit, starting real write 0 seconds. Operation starts. > This drive or media does not support the 'BLANK media' command > cdrecord: Cannot blank disk, aborting. > cdrecord: Some drives do not support all blank types. > cdrecord: Try again with cdrecord blank=3Dall. > > And dmesg shows: > acd0: FAILURE - READ_BUFFER ILLEGAL REQUEST asc=3D0x24 ascq=3D0x00 > acd0: FAILURE - MODE_SELECT_BIG ILLEGAL REQUEST asc=3D0x26 ascq=3D0x00 > > Using burncd blank I get: > > burncd: ioctl(CDRIOCBLANK): Input/output error > > and in dmesg: > > acd0: FAILURE - BLANK_CMD ILLEGAL REQUEST asc=3D0x30 ascq=3D0x05 > > The drive works perfectly with other OS, so I don't think the hardware > is the problem. > > The device is identified as: > acd0: DVDR <TSSTcorp CDDVDW TS-H653N/0208> at ata3-master SATA150 > > I have scbus, atapicd and atapicam in my kernel configuration. > > Any ideas? > > Thanks in advance. > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.o= rg" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?ade45ae90908141747v5fa404f2x90466009424b3d0f>