Date: Wed, 02 Feb 2000 14:06:29 -0800 From: "Kurt D. Zeilenga" <kurt@boolean.net> To: freebsd-questions@freebsd.org Subject: FreeBSD 3.4 boot problems Message-ID: <3898AA65.525EF750@boolean.net>
next in thread | raw e-mail | index | archive | help
I installed FreeBSD 3.4-RELEASE over the net (using boot/kern floppies).
The install went fine, but I cannot get past the boot0 prompt:
F1 FreeBSD
Default: F1
This, I believe, is correct. I have FreeBSD installed on the first slice of my only
disk. Howwever, any key press results in a long beep. I've been searching the
Handbook/FAQ/Archives for a clue, but haven't found one yet. Pointers?
Note: I can boot using a floppy and loading da(0,a)/kernel or da(0,a)/boot/loader.
I've attached output of system details below.
I cvsup'ed a copy of -STABLE, built and installed new mbr,boot0,boot1,loader,
and kernel. No change from above when using da0 mbr, boot blocks.
Here are some system details
Motherboard: Supermicro P6DBS w/ 2*PII/350 (no overclocking) w/ 128 MB
Disk: IBM DDRS-34560W on integrated aic7895 controller
# uname -a
FreeBSD gentile.boolean.net 3.4-STABLE FreeBSD 3.4-STABLE #0: Wed Feb 2 20:49:09 GMT 2000 root@gentile.boolean.net:/work/usr/src/sys/compile/SMP i386
# dmesg
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.4-STABLE #0: Wed Feb 2 20:49:09 GMT 2000
root@gentile.boolean.net:/work/usr/src/sys/compile/SMP
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Xeon/Celeron (686-class CPU)
Origin = "GenuineIntel" Id = 0x651 Stepping = 1
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 134217728 (131072K bytes)
avail memory = 126976000 (124000K bytes)
Programming 24 pins in IOAPIC #0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc036a000.
Pentium Pro MTRR support enabled
Probing for devices on PCI bus 0:
chip0: <Intel 82443BX host to PCI bridge> rev 0x02 on pci0.0.0
chip1: <Intel 82443BX host to AGP bridge> rev 0x02 on pci0.1.0
chip2: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.7.0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.7.1
chip3: <Intel 82371AB Power management controller> rev 0x02 on pci0.7.3
ahc0: <Adaptec aic7895 Ultra SCSI adapter> rev 0x04 int a irq 16 on pci0.14.0
ahc0: aic7895 Wide Channel A, SCSI Id=7, 16/255 SCBs
ahc1: <Adaptec aic7895 Ultra SCSI adapter> rev 0x04 int b irq 16 on pci0.14.1
ahc1: aic7895 Wide Channel B, SCSI Id=7, 16/255 SCBs
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> rev 0x05 int a irq 19 on pci0.20.0
fxp0: Ethernet address 00:a0:c9:d6:4f:00
Probing for devices on PCI bus 1:
Probing for PnP devices:
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 not found at 0x280
fe0 not found at 0x300
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 not found
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 not found at 0x1f0
wdc1 not found at 0x170
wt0 not found at 0x300
mcd0 not found at 0x300
matcdc0 not found at 0x230
scd0 not found at 0x230
ppc0 at 0x378 irq 7 flags 0x40 on isa
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
plip0: <PLIP network interface> on ppbus 0
ie0: unknown board_id: f000
ie0 not found at 0x300
ep0 not found at 0x300
ex0 not found
le0 not found at 0x300
lnc0 not found at 0x280
cs0 not found at 0x300
ze0 not found at 0x300
zp0 not found at 0x300
adv0 not found at 0x330
bt0 not found at 0x134
aha0 not found at 0x134
aic0 not found
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via pin 2
Waiting 15 seconds for SCSI devices to settle
SMP: AP CPU #1 Launched!
changing root device to da0s1a
da0 at ahc0 bus 0 target 1 lun 0
da0: <IBM DDRS-34560W S92A> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 4357MB (8925000 512 byte sectors: 255H 63S/T 555C)
# fdisk
******* Working on device /dev/rda0 *******
parameters extracted from in-core disklabel are:
cylinders=3125 heads=68 sectors/track=42 (2856 blks/cyl)
Figures below won't work with BIOS for partitions not in cyl 1
parameters to be used for BIOS calculations are:
cylinders=3125 heads=68 sectors/track=42 (2856 blks/cyl)
Media sector size is 512
Warning: BIOS sector numbering starts with sector 1
Information from DOS bootblock is:
The data for partition 1 is:
sysid 165,(FreeBSD/NetBSD/386BSD)
start 42, size 8924958 (4357 Meg), flag 80 (active)
beg: cyl 0/ sector 1/ head 1;
end: cyl 1023/ sector 42/ head 67
The data for partition 2 is:
<UNUSED>
The data for partition 3 is:
<UNUSED>
The data for partition 4 is:
<UNUSED>
# disklabel -r da0
# /dev/rda0c:
type: SCSI
disk: da0s1
label:
flags:
bytes/sector: 512
sectors/track: 42
tracks/cylinder: 68
sectors/cylinder: 2856
cylinders: 3124
sectors/unit: 8924958
rpm: 3600
interleave: 1
trackskew: 0
cylinderskew: 0
headswitch: 0 # milliseconds
track-to-track seek: 0 # milliseconds
drivedata: 0
8 partitions:
# size offset fstype [fsize bsize bps/cpg]
a: 196608 0 4.2BSD 0 0 0 # (Cyl. 0 - 68*)
b: 524288 196608 swap # (Cyl. 68*- 252*)
c: 8924958 0 unused 0 0 # (Cyl. 0 - 3124*)
e: 262144 720896 4.2BSD 0 0 0 # (Cyl. 252*- 344*)
f: 1048576 983040 4.2BSD 0 0 0 # (Cyl. 344*- 711*)
g: 4194304 2031616 4.2BSD 0 0 0 # (Cyl. 711*- 2179*)
h: 2699038 6225920 4.2BSD 0 0 0 # (Cyl. 2179*- 3124*)
# boot0cfg -Bv da0
# flag start chs type end chs offset size
1 0x80 0: 1: 1 0xa5 1023: 67:42 42 8924958
drive=0x80 mask=0xf options=nopacket,update,nosetdrv ticks=182
--
Kurt D. Zeilenga <kurt@boolean.net>
Net Boolean Incorporated <http://www.boolean.net/>;
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3898AA65.525EF750>