Date: Sat, 27 Oct 2012 19:13:54 +0200 From: Andreas Tobler <andreast-list@fgznet.ch> To: matt <sendtomatt@gmail.com> Cc: freebsd-x11@freebsd.org, freebsd-ppc@freebsd.org, Nathan Whitehorn <nwhitehorn@freebsd.org>, Justin Hibbits <chmeeedalf@gmail.com> Subject: Re: Does drm/dri currently work on PPC? (SUCCESS!) Message-ID: <508C1652.6070909@fgznet.ch> In-Reply-To: <508B34D6.6000502@gmail.com> References: <5083C719.1040109@gmail.com> <CAKLtBChswXj7HcZeC=SaJgMNDrZXu==DHFP5PW4wB9=ruKSWWA@mail.gmail.com> <20121021092136.20307802@narn.knownspace> <50846392.70007@gmail.com> <CAHSQbTC7SA8qiVGQi%2BfmsmzYBVQLR09Dmzhjk1Ev=srsufc_HQ@mail.gmail.com> <5085F595.4050609@gmail.com> <20121022215945.436873dc@narn.knownspace> <5089A6DB.9070904@brakiri.com> <5089DF27.9020803@gmail.com> <20121025213018.2bfa5068@narn.knownspace> <5089F799.9030507@gmail.com> <508A17C9.4030007@gmail.com> <508A9EBD.3080107@freebsd.org> <508ADBBA.1060201@fgznet.ch> <508B34D6.6000502@gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 27.10.12 03:11, matt wrote: > On 10/26/12 11:51, Andreas Tobler wrote: >> On 26.10.12 16:31, Nathan Whitehorn wrote: >>> On 10/25/12 23:55, matt wrote: >>>>> It was working without DRM "out-of-the-box". Of course I've made a >>>>> mess >>>>> trying different versions of both Xorg and the radeon driver. I'm >>>>> in the >>>>> process of getting back to the working config so I can be sure any >>>>> test >>>>> changes work/don't work. >>>>> >>>>> OpenBSD's mpi@ apparently did a lot recently over there getting DRM to >>>>> work on the G4 mini. We already had about half of the commits I see at >>>>> freshbsd, in one way or another...Our rmb/wmb() I think has had PPC >>>>> barriers since earlier this year? He did #define __BIG_ENDIAN, which >>>>> apparently was a big deal for the drm code (it's ifdef'd in a couple >>>>> places), not sure if we are already doing that. >>>>> If someone has a G4 radeon mini they could test to see if drm works >>>>> for >>>>> them or not, to rule out AGP issues (I guess they are PCI?). >>>>> >>>>> I'm not sure how the OpenBSD attachment process works vs ours, some of >>>>> the other commits of note were related to passing the BAR and memory >>>>> regions from the vgapci to drm. When I kldload drm after compiling it, >>>>> it doesn't do anything...but if I kldload radeon.ko, it recognizes agp >>>>> memory and being related to vgapci at the correct pci address...I'm >>>>> not >>>>> sure if we "are there" or not. I also didn't have DRM on OpenBSD >>>>> either. >>>>> >>>>> I think if radeon had drm on *any* big-endian platform it should rule >>>>> out endian issues in drm or radeon. Not sure if this is the case, I >>>>> guess macppc would be the most likely. >>>>> >>>>> Matt >>>> So I removed WITH_NEW_XORG, deinstalled a ton of ports, and reinstalled >>>> Xorg. I rebuild drm with __BIG_ENDIAN defined (not sure if this >>>> matters). I previously put a lot of WERROR= and NO_WERROR= into various >>>> drm makefiles to get gcc to shut up about unused return values. X >>>> -configure worked, and the xorg log indicates the drm device was >>>> successfully opened and I have drm on PPC. >>>> mesa-demos is marked broken for PPC, haven't tried glxinfo or >>>> glxgears yet. >>>> >>>> The good news is it works! >>>> The bad news: >>>> -Cannot switch back to syscons, screen gets corrupted then the system >>>> hard locks >>>> -WITH_NEW_XORG breaks it somehow >>>> >>>> Thanks to mpi@openbsd.org, Justin & Nathan! >>>> >>>> Matt >>>> _______________________________________________ >>>> freebsd-ppc@freebsd.org mailing list >>>> http://lists.freebsd.org/mailman/listinfo/freebsd-ppc >>>> To unsubscribe, send any mail to "freebsd-ppc-unsubscribe@freebsd.org" >>> >>> Great to hear! I checked in some code to define __BIG_ENDIAN if needed >>> in -CURRENT's drm (Linux uses a different number of underscores than we >>> do for perverse reasons). >> >> Thank you very much all! >> >> I can confirm it works here too (G5 32-bit): >> >> [helium:~] andreast% dmesg |grep drm >> drm0: <ATI Radeon AR 9600 XT> on vgapci0 >> info: [drm] Initialized radeon 1.31.0 20080613 >> info: [drm] Setting GART location based on new memory map >> info: [drm] Loading R300 Microcode >> info: [drm] Num pipes: 1 >> info: [drm] writeback test succeeded in 1 usecs >> >> and glxgears gives around 1250FPS vs. 52FPS w/o dri. >> >> Andreas >> >> >> > Can you change consoles or exit X successfully? > btw...issue "sync" a couple times first just in case :) > Also, is that an AGP or PCIe G5? I can exit X and restart X successfully. I can also switch (ctrl-alt-F1-F8) between X and console and back (ctrl-alt-F9). Even with glxgears running. No lock-up. It is an AGP card: (--) RADEON(0): Chipset: "ATI Radeon 9600XT AR (AGP)" (ChipID = 0x4152) (--) RADEON(0): Mapped VideoRAM: 131072 kByte (128 bit DDR SDRAM) These are my modules: Section "Module" Load "extmod" Load "record" Load "dbe" Load "glx" Load "dri" Load "dri2" EndSection And nothing special in the driver section. Andreas
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?508C1652.6070909>