From owner-freebsd-scsi Wed Dec 6 12:14:24 2000 From owner-freebsd-scsi@FreeBSD.ORG Wed Dec 6 12:14:22 2000 Return-Path: Delivered-To: freebsd-scsi@freebsd.org Received: from front3.grolier.fr (front3.grolier.fr [194.158.96.53]) by hub.freebsd.org (Postfix) with ESMTP id 50C7E37B400 for ; Wed, 6 Dec 2000 12:14:21 -0800 (PST) Received: from nas2-251.mea.club-internet.fr (nas2-251.mea.club-internet.fr [195.36.200.251]) by front3.grolier.fr (8.9.3/No_Relay+No_Spam_MGC990224) with ESMTP id VAA07749; Wed, 6 Dec 2000 21:14:08 +0100 (MET) Date: Wed, 6 Dec 2000 20:14:10 +0100 (CET) From: =?ISO-8859-1?Q?G=E9rard_Roudier?= X-Sender: groudier@linux.local To: Dan Langille Cc: freebsd-scsi@FreeBSD.ORG Subject: Re: sym SCSI card problems during settle wait In-Reply-To: <200012060956.WAA13711@ducky.nz.freebsd.org> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=ISO-8859-1 Content-Transfer-Encoding: QUOTED-PRINTABLE Sender: owner-freebsd-scsi@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Wed, 6 Dec 2000, Dan Langille wrote: > -previously posted to questions >=20 > I'm trying to install 4.2-RELEASE from floppies. The SCSI card is giving= =20 > me some grief. >=20 > I'm using an ASUS PCI SCSI card. During the probes, I see this:=20 >=20 > sym0: <810a> port 0x6100-0x61ff mem 0xc1001000-0x10010ff irq 9 at=20 > device 17.0 on pci0 sym0: No NVRAM, ID 7, Fast-10, SE parity=20 > checking=20 >=20 > The card has 53C810A on a SYMBIOS chip if that helps.=20 >=20 > The last message displayed is: Waiting 15 seconds for SCSI devices to=20 > settle. Then it stops and never comes back. Any ideas why?=20 >=20 > I've checked termination, duplicate ids, and there are no IRQ conflicts= =20 > that I can see. You must check that JP1/JP2 are configured for PCI INTA, which is normally the default setting. G=E9rard. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message