Date: Wed, 25 Oct 2000 14:35:03 +0930 From: shaun <shaun@shaunbranden.com> To: freebsd-questions@FreeBSD.ORG Subject: terminal printing 25l as cursor (includes dmesg) Message-ID: <20001025143502.A593@dingoblue.net.au>
next in thread | raw e-mail | index | archive | help
I am having trouble using programs such as vim and mutt in a virtual
terminal. The cursor is printed as 25h, 25l, etc unless I am in x. Some
system info:
$uname -a
FreeBSD sagan.tpn 5.0-CURRENT FreeBSD 5.0-CURRENT #2: Mon Oct 23 16:32:09 CST 2000 entropy@sagan.tpn:/usr/src/sys/compile/SAGAN_NEW i386
I was having this problem in 4.1 stable previously.
$echo $TERM
xterm-color
$dmesg (looks like a new unrelated hdd error, ooh goodie) first this:
mmmm, several hundred lines of
file: table is full
followed by several copies of the net 2 lines
ad0: READ command timeout tag=0 serv=0 - resetting
ata0: resetting devices .. done
and then
ppp0: IPv6 not supported
ad0: READ command timeout tag=0 serv=0 - resetting
ata0: resetting devices .. done
ad0: READ command timeout tag=0 serv=0 - resetting
ata0: resetting devices .. done
ad0: READ command timeout tag=0 serv=0 - resetting
ata0: resetting devices .. done
dmesg 2 (after reboot)
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 5.0-CURRENT #2: Mon Oct 23 16:32:09 CST 2000
entropy@sagan.tpn:/usr/src/sys/compile/SAGAN_NEW
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 262262339 Hz
CPU: AMD-K6tm w/ multimedia extensions (262.26-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x570 Stepping = 0
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
AMD Features=0x400<<b10>>
real memory = 67043328 (65472K bytes)
avail memory = 61218816 (59784K bytes)
Preloaded elf kernel "kernel" at 0xc03fd000.
md0: Malloc disk
Using $PIR table, 5 entries at 0xc00fdb90
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <AcerLabs M1541 (Aladdin-V) PCI host bridge> at
pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <AcerLabs M5243 PCI-PCI bridge> at device 1.0
on pci0
pci1: <PCI bus> on pcib1
isab0: <AcerLabs M1533 portable PCI-ISA bridge> at
device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <S3 ViRGE DX/GX graphics accelerator> at 9.0 irq
11
ed0: <NE2000 PCI Ethernet (Compex)> port 0xe000-0xe01f
irq 10 at device 10.0 on pci0
ed0: address 00:80:48:c2:86:e8, type NE2000 (16 bit)
atapci0: <AcerLabs Aladdin ATA33 controller> port
0xf000-0xf00f irq 0 at device 15.0 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
atkbdc0: <Keyboard controller (i8042)> at port
0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7
irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on
isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sbc0: <Creative ViBRA16X> at port 0x220-0x22f,0x330-0x331,0x388-0x38b
irq 5 drq 1,3 on isa0
pcm0: <SB DSP 4.16 (ViBRA16X)> on sbc0
unknown: <PNP0303> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0700> can't assign resources
unknown: <PNP0400> can't assign resources
unknown: <PNP0501> can't assign resources
IP Filter: v3.4.9 initialized. Default = pass all, Logging = enabled
ad0: 6149MB <ST36451A> [13328/15/63] at ata0-master WDMA2
ad1: 245MB <H3256-A3> [872/16/36] at ata0-slave PIO2
ata1-master: Aladdin: two atapi devices on this channel, no DMA
acd0: CD-RW <R/RW 4x4x24> at ata1-master using PIO4
ata1-slave: Aladdin: two atapi devices on this channel, no DMA
acd1: CDROM <FX240S> at ata1-slave using PIO3
Mounting root from ufs:/dev/ad0s2a
ad0: READ command timeout tag=0 serv=0 - resetting
ata0: resetting devices .. done
ad0: READ command timeout tag=0 serv=0 - resetting
ata0: resetting devices .. done
ad0: READ command timeout tag=0 serv=0 - resetting
ata0: resetting devices .. done
ad0: READ command timeout tag=0 serv=0 - resetting
ad0: trying fallback to PIO mode
ata0: resetting devices .. done
link_elf: symbol exit undefined
pid 204 (ldconfig), uid 0: exited on signal 11 (core dumped)
ppp0: IPv6 not supported
Thanks for any help and sorry about the long post.
shaun
--
Shaun Branden, email: shaun@shaunbranden.com icq:10469563
Todays fortune:
This fortune is false.
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20001025143502.A593>