From owner-freebsd-current@FreeBSD.ORG Fri Oct 14 12:36:25 2005 Return-Path: X-Original-To: freebsd-current@freebsd.org Delivered-To: freebsd-current@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9C05A16A41F; Fri, 14 Oct 2005 12:36:25 +0000 (GMT) (envelope-from freebsd-hw@epcdirect.co.uk) Received: from gunfright.epcdirect.co.uk (gunfright.epcdirect.co.uk [195.10.242.32]) by mx1.FreeBSD.org (Postfix) with ESMTP id C837343D45; Fri, 14 Oct 2005 12:36:24 +0000 (GMT) (envelope-from freebsd-hw@epcdirect.co.uk) Received: from lfarr (l-farr.int.epcdirect.co.uk [192.168.6.200]) by gunfright.epcdirect.co.uk (Postfix) with ESMTP id 26EEE6C8873; Fri, 14 Oct 2005 13:36:23 +0100 (BST) From: "Lawrence Farr" To: "'Jia-Shiun Li'" Date: Fri, 14 Oct 2005 13:36:21 +0100 Message-ID: <01a101c5d0bb$e1c05ff0$c806a8c0@lfarr> MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit X-Mailer: Microsoft Office Outlook 11 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2180 Thread-Index: AcXQr1fA3aWyCrkORnCM1DGZjGZBkAACuKag In-Reply-To: <1d6d20bc0510140405g46ce76aei@mail.gmail.com> X-Mailman-Approved-At: Fri, 14 Oct 2005 12:43:14 +0000 Cc: freebsd-current@freebsd.org, freebsd-hardware@freebsd.org Subject: RE: SATA Ports not found on Asus P5LD2-VM X-BeenThere: freebsd-current@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Discussions about the use of FreeBSD-current List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 14 Oct 2005 12:36:25 -0000 > -----Original Message----- > From: owner-freebsd-hardware@freebsd.org > [mailto:owner-freebsd-hardware@freebsd.org] On Behalf Of Jia-Shiun Li > Sent: 14 October 2005 12:06 > To: Lawrence Farr > Cc: freebsd-current@freebsd.org; freebsd-hardware@freebsd.org > Subject: Re: SATA Ports not found on Asus P5LD2-VM > > 2005/10/11, Lawrence Farr : > > Apologies, here's the rest of it > > > > I have an Asus P5LD2-VM motheroard: > > > > > Any ideas anyone? > > You have your ICH7 configured to IDE-compatible mode, and there is > apparently driver problems with it. Try setting it to ACHI mode. ICH7 > ids was added by Soren but not tested. It would be very appreciated if > you can test both configurations and attach complete verbose dmesgs to > sos@ and current@. I have tried with all 3 settings, but only 2 of the 4 ICH7 channels show up. Verbose boot with it set to SATA mode follows below. > If you disable the ITE controller in BIOS setting then OS will not be It's got nothing connected to it. Thanks anyway. ############################## Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-BETA2 #0: Tue Aug 23 12:45:39 BST 2005 root@nas-1.int.electronicpage.co.uk:/usr/obj/usr/src/sys/P6 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3200.40-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf41 Stepping = 1 Features=0xbfebfbff Features2=0x441d> Hyperthreading: 2 logical CPUs real memory = 1072300032 (1022 MB) avail memory = 1040547840 (992 MB) npx0: [FAST] npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi0: Power Button (fixed) pci_link0: irq 11 on acpi0 pci_link1: irq 10 on acpi0 pci_link2: irq 7 on acpi0 pci_link3: irq 3 on acpi0 pci_link4: irq 5 on acpi0 pci_link5: irq 0 on acpi0 pci_link6: irq 0 on acpi0 pci_link7: irq 0 on acpi0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: on acpi0 acpi_throttle0: on cpu0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pci0: at device 2.0 (no driver attached) pci0: at device 2.1 (no driver attached) pcib1: irq 11 at device 28.0 on pci0 pci3: on pcib1 pcib2: irq 10 at device 28.1 on pci0 pci2: on pcib2 em0: port 0xd800-0xd81f mem 0xcffe0000-0xcfffffff irq 10 at device 0.0 on pci2 em0: Ethernet address: 00:13:d4:46:b3:cb em0: Speed:N/A Duplex:N/A uhci0: port 0xa800-0xa81f irq 5 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0xb000-0xb01f irq 10 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0xb400-0xb41f irq 7 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: port 0xb800-0xb81f irq 3 at device 29.3 on pci0 uhci3: [GIANT-LOCKED] usb3: on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: mem 0xcfeffc00-0xcfefffff irq 5 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: on ehci0 usb4: USB revision 2.0 uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered pcib3: at device 30.0 on pci0 pci1: on pcib3 isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.2 on pci0 atapci0: failed to enable memory mapping! ata0: on atapci0 ata1: on atapci0 pci0: at device 31.3 (no driver attached) acpi_button0: on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A, console pmtimer0 on isa0 ppc0: parallel port not found. sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 3200395968 Hz quality 800 Timecounters tick every 1.000 msec ad0: 381554MB at ata0-master SATA150 ad2: 476940MB at ata1-master SATA150 Trying to mount root from ufs:/dev/ad0s1a Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...0 0 0 0 0 0 0 0 0 done All buffers synced. unmount of /dev failed (BUSY) Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-BETA2 #0: Tue Aug 23 12:45:39 BST 2005 root@nas-1.int.electronicpage.co.uk:/usr/obj/usr/src/sys/P6 Preloaded elf kernel "/boot/kernel/kernel" at 0xc0b29000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0b29174. Calibrating clock(s) ... i8254 clock: 1193162 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 3200396304 Hz CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3200.40-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf41 Stepping = 1 Features=0xbfebfbff Features2=0x441d> Hyperthreading: 2 logical CPUs real memory = 1072300032 (1022 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c25000 - 0x000000003ec6dfff, 1040486400 bytes (254025 pages) avail memory = 1040547840 (992 MB) bios32: Found BIOS32 Service Directory header at 0xc00f0000 bios32: Entry = 0xf0010 (c00f0010) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0x31 pnpbios: Found PnP BIOS data at 0xc00f7b00 pnpbios: Entry = f0000:879a Rev = 1.0 Other BIOS signatures found: wlan: <802.11 Link Layer> random: nfslock: pseudo-device io: mem: Pentium Pro MTRR support enabled null: npx0: [FAST] npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x80000094 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=27708086) pcibios: BIOS version 2.10 Found $PIR table, 14 entries at 0xc00f7990 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 1 A 0x60 3 4 5 6 7 10 11 12 14 15 embedded 0 1 B 0x61 3 4 5 6 7 10 11 12 14 15 embedded 0 1 C 0x62 3 4 5 6 7 10 11 12 14 15 embedded 0 1 D 0x63 3 4 5 6 7 10 11 12 14 15 embedded 255 0 A 0x60 3 4 5 6 7 10 11 12 14 15 embedded 0 30 A 0x60 3 4 5 6 7 10 11 12 14 15 embedded 0 30 B 0x61 3 4 5 6 7 10 11 12 14 15 embedded 0 28 A 0x60 3 4 5 6 7 10 11 12 14 15 embedded 0 28 B 0x61 3 4 5 6 7 10 11 12 14 15 embedded 0 28 C 0x62 3 4 5 6 7 10 11 12 14 15 embedded 0 28 D 0x63 3 4 5 6 7 10 11 12 14 15 embedded 1 8 A 0x68 3 4 5 6 7 10 11 12 14 15 embedded 0 31 A 0x62 3 4 5 6 7 10 11 12 14 15 embedded 0 31 B 0x61 3 4 5 6 7 10 11 12 14 15 embedded 0 31 D 0x63 3 4 5 6 7 10 11 12 14 15 embedded 0 2 A 0x60 3 4 5 6 7 10 11 12 14 15 embedded 0 2 B 0x61 3 4 5 6 7 10 11 12 14 15 embedded 0 29 A 0x68 3 4 5 6 7 10 11 12 14 15 embedded 0 29 B 0x61 3 4 5 6 7 10 11 12 14 15 embedded 0 29 C 0x62 3 4 5 6 7 10 11 12 14 15 embedded 0 29 D 0x63 3 4 5 6 7 10 11 12 14 15 embedded 0 27 A 0x63 3 4 5 6 7 10 11 12 14 15 slot 1 3 0 A 0x60 3 4 5 6 7 10 11 12 14 15 slot 1 3 0 B 0x61 3 4 5 6 7 10 11 12 14 15 slot 1 3 0 C 0x62 3 4 5 6 7 10 11 12 14 15 slot 1 3 0 D 0x63 3 4 5 6 7 10 11 12 14 15 embedded 2 0 A 0x61 3 4 5 6 7 10 11 12 14 15 slot 1 1 9 A 0x69 3 4 5 6 7 10 11 12 14 15 slot 1 1 9 B 0x6a 3 4 5 6 7 10 11 12 14 15 slot 1 1 9 C 0x6b 3 4 5 6 7 10 11 12 14 15 slot 1 1 9 D 0x68 3 4 5 6 7 10 11 12 14 15 slot 2 1 10 A 0x6a 3 4 5 6 7 10 11 12 14 15 slot 2 1 10 B 0x6b 3 4 5 6 7 10 11 12 14 15 slot 2 1 10 C 0x68 3 4 5 6 7 10 11 12 14 15 slot 2 1 10 D 0x69 3 4 5 6 7 10 11 12 14 15 embedded 1 4 A 0x63 3 4 5 6 7 10 11 12 14 15 acpi_bus_number: root bus has no _BBN, assuming 0 acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR AcpiOsDerivePciId: bus 0 dev 31 func 2 acpi_bus_number: root bus has no _BBN, assuming 0 acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR AcpiOsDerivePciId: bus 0 dev 31 func 1 acpi_bus_number: root bus has no _BBN, assuming 0 acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi0: Power Button (fixed) atpic: Programming IRQ9 as level/low pci_link0: irq 11 on acpi0 pci_link0: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 10 11 12 14 15 pci_link0: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 10 11 12 14 15 pci_link0: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link1: irq 10 on acpi0 pci_link1: Links after initial probe: Index IRQ Rtd Ref IRQs 0 10 N 0 3 4 5 6 7 10 11 12 14 15 pci_link1: Links after initial validation: Index IRQ Rtd Ref IRQs 0 10 N 0 3 4 5 6 7 10 11 12 14 15 pci_link1: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link2: irq 7 on acpi0 pci_link2: Links after initial probe: Index IRQ Rtd Ref IRQs 0 7 N 0 3 4 5 6 7 10 11 12 14 15 pci_link2: Links after initial validation: Index IRQ Rtd Ref IRQs 0 7 N 0 3 4 5 6 7 10 11 12 14 15 pci_link2: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link3: irq 3 on acpi0 pci_link3: Links after initial probe: Index IRQ Rtd Ref IRQs 0 3 N 0 3 4 5 6 7 10 11 12 14 15 pci_link3: Links after initial validation: Index IRQ Rtd Ref IRQs 0 3 N 0 3 4 5 6 7 10 11 12 14 15 pci_link3: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link4: irq 5 on acpi0 pci_link4: Links after initial probe: Index IRQ Rtd Ref IRQs 0 5 N 0 3 4 5 6 7 10 11 12 14 15 pci_link4: Links after initial validation: Index IRQ Rtd Ref IRQs 0 5 N 0 3 4 5 6 7 10 11 12 14 15 pci_link4: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link5: irq 0 on acpi0 pci_link5: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link5: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link5: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link6: irq 0 on acpi0 pci_link6: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link6: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link6: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link7: irq 0 on acpi0 pci_link7: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link7: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link7: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 12 14 15 ACPI timer: 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: on acpi0 acpi_throttle0: on cpu0 acpi_throttle0: P_CNT from P_BLK 0x810 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x2770, revid=0x02 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2772, revid=0x02 bus=0, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[10]: type 1, range 32, base cfd80000, size 19, enabled map[14]: type 4, range 32, base 0000a400, size 3, enabled map[18]: type 3, range 32, base d0000000, size 28, enabled map[1c]: type 1, range 32, base cfe80000, size 18, enabled pcib0: matched entry for 0.2.INTA (src \\_SB_.LNKA:0) pcib0: slot 2 INTA routed to irq 11 via \\_SB_.LNKA found-> vendor=0x8086, dev=0x2776, revid=0x02 bus=0, slot=2, func=1 class=03-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base cfe00000, size 19, enabled found-> vendor=0x8086, dev=0x27d0, revid=0x01 bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=4 (dwords) lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 pcib0: matched entry for 0.28.INTA (src \\_SB_.LNKA:0) pcib0: slot 28 INTA routed to irq 11 via \\_SB_.LNKA found-> vendor=0x8086, dev=0x27d2, revid=0x01 bus=0, slot=28, func=1 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=4 (dwords) lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 pcib0: matched entry for 0.28.INTB (src \\_SB_.LNKB:0) pcib0: slot 28 INTB routed to irq 10 via \\_SB_.LNKB found-> vendor=0x8086, dev=0x27c8, revid=0x01 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 map[20]: type 4, range 32, base 0000a800, size 5, enabled pcib0: matched entry for 0.29.INTA (src \\_SB_.LNKE:0) pcib0: slot 29 INTA routed to irq 5 via \\_SB_.LNKE found-> vendor=0x8086, dev=0x27c9, revid=0x01 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[20]: type 4, range 32, base 0000b000, size 5, enabled pcib0: matched entry for 0.29.INTB (src \\_SB_.LNKB:0) pcib0: slot 29 INTB routed to irq 10 via \\_SB_.LNKB found-> vendor=0x8086, dev=0x27ca, revid=0x01 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=7 map[20]: type 4, range 32, base 0000b400, size 5, enabled pcib0: matched entry for 0.29.INTC (src \\_SB_.LNKC:0) pcib0: slot 29 INTC routed to irq 7 via \\_SB_.LNKC found-> vendor=0x8086, dev=0x27cb, revid=0x01 bus=0, slot=29, func=3 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=3 map[20]: type 4, range 32, base 0000b800, size 5, enabled pcib0: matched entry for 0.29.INTD (src \\_SB_.LNKD:0) pcib0: slot 29 INTD routed to irq 3 via \\_SB_.LNKD found-> vendor=0x8086, dev=0x27cc, revid=0x01 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base cfeffc00, size 10, enabled pcib0: matched entry for 0.29.INTA (src \\_SB_.LNKE:0) pcib0: slot 29 INTA routed to irq 5 via \\_SB_.LNKE found-> vendor=0x8086, dev=0x244e, revid=0xe1 bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x27b8, revid=0x01 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x27c0, revid=0x01 bus=0, slot=31, func=2 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 0000ffa0, size 4, enabled found-> vendor=0x8086, dev=0x27da, revid=0x01 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 map[20]: type 4, range 32, base 00000400, size 5, enabled pci0: at device 2.0 (no driver attached) pci0: at device 2.1 (no driver attached) pcib1: irq 11 at device 28.0 on pci0 pcib1: secondary bus 3 pcib1: subordinate bus 3 pcib1: I/O decode 0xe000-0xefff pcib1: memory decode 0xfff00000-0xfffff pcib1: prefetched decode 0xfff00000-0xfffff pci3: on pcib1 pci3: physical bus=3 pcib2: irq 10 at device 28.1 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xd000-0xdfff pcib2: memory decode 0xcff00000-0xcfffffff pcib2: prefetched decode 0xfff00000-0xfffff pci2: on pcib2 pci2: physical bus=2 found-> vendor=0x8086, dev=0x108b, revid=0x03 bus=2, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=4 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 1, range 32, base cffe0000, size 17, enabled pcib2: (null) requested memory range 0xcffe0000-0xcfffffff: good map[18]: type 4, range 32, base 0000d800, size 5, enabled pcib2: (null) requested I/O range 0xd800-0xd81f: in range pcib2: matched entry for 2.0.INTA (src \\_SB_.LNKB:0) pcib2: slot 0 INTA routed to irq 10 via \\_SB_.LNKB em0: port 0xd800-0xd81f mem 0xcffe0000-0xcfffffff irq 10 at device 0.0 on pci2 em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xcffe0000 em0: Reserved 0x20 bytes for rid 0x18 type 4 at 0xd800 em0: [MPSAFE] em0: bpf attached em0: Ethernet address: 00:13:d4:46:b3:cb em0: Speed:N/A Duplex:N/A uhci0: port 0xa800-0xa81f irq 5 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xa800 uhci0: [GIANT-LOCKED] usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0xb000-0xb01f irq 10 at device 29.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb000 uhci1: [GIANT-LOCKED] usb1: on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0xb400-0xb41f irq 7 at device 29.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb400 uhci2: [GIANT-LOCKED] usb2: on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: port 0xb800-0xb81f irq 3 at device 29.3 on pci0 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb800 uhci3: [GIANT-LOCKED] usb3: on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: mem 0xcfeffc00-0xcfefffff irq 5 at device 29.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xcfeffc00 ehci0: [GIANT-LOCKED] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: on ehci0 usb4: USB revision 2.0 uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered pcib3: at device 30.0 on pci0 pcib3: secondary bus 1 pcib3: subordinate bus 1 pcib3: I/O decode 0xc000-0xcfff pcib3: memory decode 0xfff00000-0xfffff pcib3: prefetched decode 0xfff00000-0xfffff pcib3: Subtractively decoded bridge. pci1: on pcib3 pci1: physical bus=1 isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.2 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0 atapci0: failed to enable memory mapping! ata0: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=01 ostat0=80 ostat1=00 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1 ata0: [MPSAFE] ata1: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=01 ostat0=80 ostat1=00 ata1: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=50 stat1=00 devices=0x1 ata1: [MPSAFE] pci0: at device 31.3 (no driver attached) acpi_button0: on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ sio0: irq maps: 0x1 0x11 0x1 0x1 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A, console ex_isa_identify() ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it sio: sio0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) ppc0: parallel port not found. ppc0: failed to probe at irq 7 on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x1 0x1 0x1 0x1 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 3200396304 Hz quality 800 Timecounters tick every 1.000 msec lo0: bpf attached ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad0: 381554MB at ata0-master SATA150 ad0: 781422768 sectors [775221C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad0 ad0: Intel check1 failed ad0: Adaptec check1 failed ad0: LSI (v3) check1 failed ad0: LSI (v2) check1 failed ad0: FreeBSD check1 failed ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad2: 476940MB at ata1-master SATA150 ad2: 976773168 sectors [969021C/16H/63S] 16 sectors/interrupt 1 depth queue ad2: Intel check1 failed ad2: Adaptec check1 failed adGEOM: new disk ad2 2: LSI (v3) check1 failed ad2: LSI (v2) check1 failed ad2: FreeBSD check1 failed ATA PseudoRAID loaded Trying to mount root from ufs:/dev/ad0s1a start_init: trying /sbin/init em0: Link is up 100 Mbps Full Duplex em0: link state changed to UP