Date: Wed, 16 Nov 2005 13:40:27 +0800 From: snnn <snnn119@gmail.com> To: freebsd-questions@freebsd.org Subject: smp problem Message-ID: <437AC64B.8080304@gmail.com>
next in thread | raw e-mail | index | archive | help
My server is HP DL380,which has 2 Intel Xeox 3.04G x68 CPU,but hw.ncpu=1; $ sysctl hw.ncpu hw.ncpu: 1 I've already add "Option SMP" into the kernel configure file and recompiled the kernel. The FreeBSD version is 5.4,just updated from cvsup . The following is the boot info Nov 15 11:03:53 syslogd: kernel boot file is /boot/kernel/kernel Nov 15 11:03:53 kernel: Copyright (c) 1992-2005 The FreeBSD Project. Nov 15 11:03:53 kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, \1991, 1992, 1993, 1994 Nov 15 11:03:53 kernel: The Regents of the University of California. All r\ights reserved. Nov 15 11:03:53 kernel: FreeBSD 5.4-RELEASE-p8 #1: Tue Nov 15 10:45:33 CST\ 2005 Nov 15 11:03:53 kernel: /usr/obj/usr/src/sys/MYKERNE\L Nov 15 11:03:53 kernel: Timecounter "i8254" frequency 1193182 Hz quality 0 Nov 15 11:03:53 kernel: CPU: Intel(R) Xeon(TM) CPU 3.06GHz (3056.50-MHz 68\6-class CPU) Nov 15 11:03:53 kernel: Origin = "GenuineIntel" Id = 0xf25 Stepping = 5 Nov 15 11:03:53 kernel: Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE\,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,\TM,PBE> Nov 15 11:03:53 kernel: Hyperthreading: 2 logical CPUs Nov 15 11:03:53 kernel: real memory = 2147459072 (2047 MB) Nov 15 11:03:53 kernel: avail memory = 2095996928 (1998 MB) Nov 15 11:03:53 kernel: Pentium 4 TCC support enabled, current performance\ 100% Nov 15 11:03:53 kernel: npx0: <math processor> on motherboard Nov 15 11:03:53 kernel: npx0: INT 16 interface Nov 15 11:03:53 kernel: acpi0: <COMPAQ P29> on motherboard Nov 15 11:03:53 kernel: acpi0: Power Button (fixed) Nov 15 11:03:53 kernel: Timecounter "ACPI-safe" frequency 3579545 Hz quali\ty 1000 Nov 15 11:03:53 kernel: acpi_timer0: <32-bit timer at 3.579545MHz> port 0x\920-0x923 on acpi0 Nov 15 11:03:53 kernel: cpu0: <ACPI CPU> on acpi0 Nov 15 11:03:53 kernel: pcib0: <ACPI Host-PCI bridge> on acpi0 ov 15 11:03:53 kernel: pci0: <ACPI PCI bus> on pcib0 Nov 15 11:03:53 kernel: pci0: <display, VGA> at device 3.0 (no driver atta\ched) Nov 15 11:03:53 kernel: pci0: <base peripheral> at device 4.0 (no driver a\ttached) Nov 15 11:03:53 kernel: pci0: <base peripheral> at device 4.2 (no driver a\ttached) Nov 15 11:03:53 kernel: isab0: <PCI-ISA bridge> at device 15.0 on pci0 Nov 15 11:03:53 kernel: isa0: <ISA bus> on isab0 Nov 15 11:03:53 kernel: atapci0: <ServerWorks CSB5 UDMA100 controller> por\t 0x2000-0x200f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0 Nov 15 11:03:53 kernel: ata0: channel #0 on atapci0 Nov 15 11:03:53 kernel: ata1: channel #1 on atapci0 Nov 15 11:03:53 kernel: ohci0: <OHCI (generic) USB controller> mem 0xf5ef0\000-0xf5ef0fff irq 7 at device 15.2 on pci0 Nov 15 11:03:53 kernel: usb0: OHCI version 1.0, legacy support Nov 15 11:03:53 kernel: usb0: SMM does not respond, resetting Nov 15 11:03:53 kernel: usb0: <OHCI (generic) USB controller> on ohci0 Nov 15 11:03:53 kernel: usb0: USB revision 1.0 Nov 15 11:03:53 kernel: uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00\/1.00, addr 1 Nov 15 11:03:53 kernel: uhub0: 4 ports with 4 removable, self powered Nov 15 11:03:53 kernel: pcib1: <ACPI Host-PCI bridge> on acpi0 Nov 15 11:03:53 kernel: pci1: <ACPI PCI bus> on pcib1 Nov 15 11:03:53 kernel: ciss0: <Compaq Smart Array 5i> port 0x3000-0x30ff \mem 0xf7cf0000-0xf7cf3fff,0xf7dc0000-0xf7dfffff irq 10 at device 3.0 on pci1 Nov 15 11:03:53 kernel: pcib2: <ACPI Host-PCI bridge> on acpi0 Nov 15 11:03:53 kernel: pci2: <ACPI PCI bus> on pcib2 Nov 15 11:03:53 kernel: bge0: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev\. 0x1002> mem 0xf7ef0000-0xf7efffff irq 11 at device 1.0 on pci2 Nov 15 11:03:53 kernel: miibus0: <MII bus> on bge0 Nov 15 11:03:53 kernel: brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus\0 Nov 15 11:03:53 kernel: brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100base\TX-FDX, 1000baseTX, 1000baseTX-FDX, auto Nov 15 11:03:53 kernel: bge0: Ethernet address: 00:11:0a:99:83:ad Nov 15 11:03:53 kernel: bge1: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev\. 0x1002> mem 0xf7ee0000-0xf7eeffff irq 15 at device 2.0 on pci2 Nov 15 11:03:53 kernel: miibus1: <MII bus> on bge1 Nov 15 11:03:53 kernel: brgphy1: <BCM5703 10/100/1000baseTX PHY> on miibus\1 Nov 15 11:03:53 kernel: brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100base\TX-FDX, 1000baseTX, 1000baseTX-FDX, auto Nov 15 11:03:53 kernel: bge1: Ethernet address: 00:11:0a:99:83:ac Nov 15 11:03:53 kernel: pcib3: <ACPI Host-PCI bridge> on acpi0 Nov 15 11:03:53 kernel: pci3: <ACPI PCI bus> on pcib3 Nov 15 11:03:53 kernel: pcib4: <ACPI Host-PCI bridge> on acpi0 Nov 15 11:03:53 kernel: pci6: <ACPI PCI bus> on pcib4 Nov 15 11:03:53 kernel: pci6: <base peripheral, PCI hot-plug controller> a\t device 30.0 (no driver attached) Nov 15 11:03:53 kernel: acpi_tz0: <Thermal Zone> on acpi0 Nov 15 11:03:53 kernel: atkbdc0: <Keyboard controller (i8042)> port 0x64,0\x60 irq 1 on acpi0 Nov 15 11:03:53 kernel: atkbd0: <AT Keyboard> irq 1 on atkbdc0 Nov 15 11:03:53 kernel: kbd0 at atkbd0 Nov 15 11:03:53 kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0 Nov 15 11:03:53 kernel: psm0: model IntelliMouse Explorer, device ID 4 Nov 15 11:03:53 kernel: sio0: <Standard PC COM port> port 0x3f8-0x3ff irq \4 flags 0x10 on acpi0 Nov 15 11:03:53 kernel: sio0: type 16550A Nov 15 11:03:53 kernel: fdc0: <floppy drive controller (FDE)> port 0x3f2-0\x3f5 irq 6 drq 2 on acpi0 Nov 15 11:03:53 kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0 Nov 15 11:03:53 kernel: orm0: <ISA Option ROMs> at iomem 0xee000-0xeffff,0\xcc000-0xcd7ff,0xc8000-0xcbfff,0xc0000-0xc7fff on isa0 Nov 15 11:03:53 kernel: pmtimer0 on isa0 Nov 15 11:03:53 kernel: ppc0: parallel port not found. Nov 15 11:03:53 kernel: sc0: <System console> at flags 0x100 on isa0 Nov 15 11:03:53 kernel: sc0: VGA <16 virtual consoles, flags=0x300> Nov 15 11:03:53 kernel: sio1: configured irq 3 not in bitmap of probed irq\s 0 Nov 15 11:03:53 kernel: sio1: port may not be enabled Nov 15 11:03:53 kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem \0xa0000-0xbffff on isa0 Nov 15 11:03:53 kernel: Timecounter "TSC" frequency 3056502488 Hz quality \800 Nov 15 11:03:53 kernel: Timecounters tick every 10.000 msec Nov 15 11:03:53 kernel: acd0: CDROM <CD-224E/9.9A> at ata0-master PIO4 Nov 15 11:03:53 kernel: da0 at ciss0 bus 0 target 0 lun 0 Nov 15 11:03:53 kernel: da0: <COMPAQ RAID 0 VOLUME OK> Fixed Direct Access SCSI-0 device Nov 15 11:03:53 kernel: da0: 135.168MB/s transfers Nov 15 11:03:53 kernel: da0: 280015MB (573472305 512 byte sectors: 255H 63S/T 35697C) Nov 15 11:03:53 kernel: Mounting root from ufs:/dev/da0s1a Nov 15 11:03:53 named[275]: starting BIND 9.3.1 -u bind -t /var/named Nov 15 11:03:53 named[275]: command channel listening on 127.0.0.1#953 Nov 15 11:03:53 named[275]: command channel listening on ::1#953 Nov 15 11:03:53 named[275]: zone 0.0.127.IN-ADDR.ARPA/IN: loading master f\ile master/localhost.rev: file not found Nov 15 11:03:53 named[275]: zone 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0\.0.0.0.0.0.0.0.0.0.0.0.IP6.ARPA/IN: loading master file master/localhost-v6.rev\: file not found Nov 15 11:03:53 named[275]: zone 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0\.0.0.0.0.0.0.0.0.0.0.0.IP6.INT/IN: loading master file master/localhost-v6.rev:\ file not found Nov 15 11:03:53 named[275]: running
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?437AC64B.8080304>