Date: Wed, 1 Aug 2007 15:21:12 -0600 From: "Ross Penner" <ross.penner@gmail.com> To: "Reid Linnemann" <lreid@cs.okstate.edu> Cc: freebsd-questions@freebsd.org Subject: Re: Installing from USB Flash Drive Message-ID: <f80199c40708011421l9600e6tf16cf14fc17efcaa@mail.gmail.com> In-Reply-To: <46B0D50F.8050402@cs.okstate.edu> References: <op.twd8jds0q910fd@localhost> <46B0D50F.8050402@cs.okstate.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
On 8/1/07, Reid Linnemann < lreid@cs.okstate.edu> wrote: > > Written by Ross Penner on 08/01/07 13:34>> > > Hi everybody, > > > > I'm trying to install a system on a machine that doesn't have an optical > > drive. I plan on using a USB flash drive to do the job and found a > > messages from hackers@freebsd.org > > (http://www.mail-archive.com/freebsd-hackers@freebsd.org/msg55434.html ) > > about just such a thing. The script provided converts the CD image into > > one suitable for a flashmemory stick. I used and coverted it without > > issue. The instructions say to use dd to prepare the flash drive so > > executed > > #dd if=flashbsd.iso of=/dev/da0 > > I'm not entirely confident that that was the correct procedure, as I'm > > quite unfamilar with dd. Unfortunetly, I can't seem to get the drive to > > boot. I can mount the filesystem so it seems that prepareing the drive > > was succesful. I'm using a via chipset and yes, the bios is set to boot > > from USB-FDD. I used the 6.2 boot only image. > > > > Thanks for any insight you can provide me. > > > > Ross > > > > That seems correct to me. You may want to 'bsdlabel -B /dev/da0' after > writing the ufs image to it. The script you referenced does this to the > image before you write it to the flash drive, so the boot code should > already be there... but it appears to have gotten lost. > Perhaps it never worked in the first place? rosbot# bsdlabel -B /dev/da0 bsdlabel: partition c doesn't cover the whole unit! bsdlabel: An incorrect partition c may cause problems for standard system utilities I didn't do anything to the drive before dd'ing to it. Should have it been prepared somehow? I assumed dd would take care of partitions. There is a da0a and a da0c in /dev/ .
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?f80199c40708011421l9600e6tf16cf14fc17efcaa>