Date: Wed, 31 Mar 1999 21:10:44 -0800 (PST) From: rick hamell <hamellr@dsinw.com> To: Andrew Johns <A_Johns@TurnAround.com.au> Cc: questions@FreeBSD.ORG Subject: Re: SoundBlaster AWE64 Config problem Message-ID: <Pine.BSF.3.91.990331210710.4040B-100000@dsinw.com> In-Reply-To: <3702FE9C.31683E5C@TurnAround.com.au>
next in thread | previous in thread | raw e-mail | index | archive | help
> Do you have /dev/ mixer0|sequencer0|etc??
Yes, they all appear to be present.
> If not, then yes, you have to cd to /dev and sh MAKEDEV snd0
> to create these devices in /dev.
I too did this about five times until I figured out what was
really happening...:)
> If they are already there then the kernel is simply not
> detecting them with the settings that you have assigned them.
> It could also be PNP getting in the way. Send me your boot
> messages (dmesg) and I'll try to sort it out for you.
Possibly, PNP and Windows 95 seem to correspond about IRQ
Settings, I/O, DMA Etc... Dmesg is attached.... Thanks for your help. :)
Rick
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.1-RELEASE #0: Tue Mar 30 18:15:11 GMT 1999
hamellr@beowulf.my.domain:/usr/src/sys/compile/BEOWULF
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD-K6tm w/ multimedia extensions (233.86-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x562 Stepping=2
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 100663296 (98304K bytes)
avail memory = 94633984 (92416K bytes)
Preloaded elf kernel "kernel" at 0xf030d000.
Probing for devices on PCI bus 0:
chip0: <VIA 82C597 (Apollo VP3) system controller> rev 0x03 on pci0.0.0
chip1: <VIA 82C598MVP (Apollo MVP3) PCI-PCI bridge> rev 0x00 on pci0.1.0
chip2: <VIA 82C586 PCI-ISA bridge> rev 0x41 on pci0.7.0
ide_pci0: <VIA 82C586x (Apollo) Bus-master IDE controller> rev 0x06 on pci0.7.1
chip3: <VIA 82C586B ACPI interface> rev 0x10 on pci0.7.3
ncr0: <ncr 53c875 fast20 wide scsi> rev 0x03 int a irq 11 on pci0.8.0
de0: <Digital 21041 Ethernet> rev 0x21 int a irq 10 on pci0.10.0
de0: 21041 [10Mb/s] pass 2.1
de0: address 00:c0:f0:37:9b:3b
Probing for devices on PCI bus 1:
vga0: <ATI model 4742 graphics accelerator> rev 0x5c on pci1.0.0
Probing for PnP devices:
CSN 1 Vendor ID: CTL009e [0x9e008c0e] Serial 0x0b8a27ac Comp ID: PNPb02f [0x2fb0d041]
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 not found
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <WDC AC21000H>
wd0: 1033MB (2116800 sectors), 2100 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (atapi): <FX320M/m02>, removable, intr, dma, iordis
acd0: drive speed 5512KB/sec, 256KB cache
acd0: supported read types: CD-R, CD-RW, CD-DA, packet track
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
scd0 not found at 0x230
ppc0 at 0x378 irq 7 on isa
ppc0: W83877F chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppb0: IEEE1284 device found /NIBBLE
Probing for PnP devices on ppbus0:
ppbus0: <EPSON Stylus COLOR 500> PRINTER ESCPL2-00
nlpt0: <generic printer> on ppbus 0
nlpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
plip0: <PLIP network interface> on ppbus 0
sb_reset_dsp failed
sb0 not found at 0x220
sb_reset_dsp failed
sbxvi0 not found
sbmidi0 not found at 0x330
opl0 not found at 0x388
awe0 at 0x620 on isa
AWE32: not detected
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
de0: enabling 10baseT port
Waiting 15 seconds for SCSI devices to settle
pass1 at ncr0 bus 0 target 4 lun 0
pass1: <HP C2520A 3503> Fixed Processor SCSI-2 device
pass1: 3.300MB/s transfers
da0 at ncr0 bus 0 target 1 lun 0
da0: <QUANTUM VIKING 4.5 SCA 880R> Fixed Direct Access SCSI-2 device
da0: 40.0MB/s transfers (20.0MHz, offset 16, 16bit), Tagged Queueing Enabled
da0: 4345MB (8899737 512 byte sectors: 255H 63S/T 553C)
changing root device to da0s1a
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.91.990331210710.4040B-100000>