Date: Mon, 14 Dec 2009 10:04:21 -0600 From: Robert Noland <rnoland@FreeBSD.org> To: Leonardo Santagostini <lsantagostini@gmail.com> Cc: freebsd-mobile@freebsd.org Subject: Re: Problems with Intel 965 and compiz Message-ID: <1260806661.2281.93.camel@balrog.2hip.net> In-Reply-To: <9ab7eeeb0912132126s262b431fi8dda458c9cf245f8@mail.gmail.com> References: <9ab7eeeb0912132126s262b431fi8dda458c9cf245f8@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
--=-5LA0Ki74Sj2FlFfoGzBx Content-Type: text/plain Content-Transfer-Encoding: 7bit On Mon, 2009-12-14 at 05:26 +0000, Leonardo Santagostini wrote: > Hello people, > > After googling a lot about my problem, i have no more remedy than posting a > question here. > > The point is. I have X working perfect, but when i want to start compiz, > title bars, go out. > > I have tried changing in Xorg.conf a lot of parameters regarding > acceleration methods, i have probed changing various parameters with > driconf, seting LIBGL_ALWAYS_INDIRECT to true, trying to change sync to > vblanc. But without good results. > > Anybody has THE point regarding this issue ? 1) Make sure that everything is up to date. ports/kernel. You don't say what kernel you are using, but any -STABLE should be fine. I don't remember if all of the Intel fixes are in 7.2-RELEASE or not. 2) I'll attach an xorg.conf that I use on my Intel boxes that you can use for reference. The key bits are AIGLX and Composite. 3) Get X up and running and then in an xterm run "compiz-manager". It should handle probing and setting up all of the correct flags or at least giving you an error that people can work with. robert. > Thanks a lot. > > Kind Regards, > Leonardo Santagostini > _______________________________________________ > freebsd-mobile@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-mobile > To unsubscribe, send any mail to "freebsd-mobile-unsubscribe@freebsd.org" -- Robert Noland <rnoland@FreeBSD.org> FreeBSD --=-5LA0Ki74Sj2FlFfoGzBx Content-Disposition: attachment; filename="xorg.conf.i915-gm965" Content-Type: text/plain; name="xorg.conf.i915-gm965"; charset="us-ascii" Content-Transfer-Encoding: 7bit Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Mouse1" "SendCoreEvents" InputDevice "Keyboard0" "CoreKeyboard" Option "AIGLX" #Option "AllowEmptyInput" "Off" EndSection Section "Extensions" Option "Composite" "Enable" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "synaptics" Option "Protocol" "alps" Option "Device" "/dev/psm0" Option "SHMConfig" "On" Option "LeftEdge" "120" Option "RightEdge" "830" Option "TopEdge" "120" Option "BottomEdge" "650" Option "FingerLow" "14" Option "FingerHigh" "15" Option "MaxTapTime" "180" Option "MaxTapMove" "110" Option "EmulateMidButtonTime" "75" Option "VertScrollDelta" "20" Option "HorizScrollDelta" "20" Option "CornerCoasting" "1" Option "CoastingSpeed" "3" Option "MinSpeed" "0.3" Option "MaxSpeed" "0.75" Option "AccelFactor" "0.015" Option "EdgeMotionMinSpeed" "200" Option "EdgeMotionMaxSpeed" "200" Option "UpDownScrolling" "1" Option "CircularScrolling" "1" Option "CircScrollDelta" "0.1" EndSection Section "InputDevice" Identifier "Mouse1" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/sysmouse" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" #DisplaySize 340 270 # mm Identifier "Monitor0" VendorName "DEL" ModelName "DELL 1708FP" ### Comment all HorizSync and VertRefresh values to use DDC: #HorizSync 30.0 - 81.0 #VertRefresh 56.0 - 76.0 Option "DPMS" Option "PreferredMode" "1440x900" # Option "RightOf" "TMDS-1" EndSection Section "Monitor" #DisplaySize 340 270 # mm Identifier "Monitor1" VendorName "DEL" ModelName "DELL 1708FP" ### Comment all HorizSync and VertRefresh values to use DDC: #HorizSync 30.0 - 81.0 #VertRefresh 56.0 - 76.0 Option "DPMS" Option "PreferredMode" "1280x1024" # Option "Position" "0 0" EndSection Section "Monitor" #DisplaySize 340 270 # mm Identifier "Monitor2" VendorName "DEL" ModelName "DELL 1708FP" ### Comment all HorizSync and VertRefresh values to use DDC: #HorizSync 30.0 - 81.0 #VertRefresh 56.0 - 76.0 Option "DPMS" Option "PreferredMode" "1280x1024" # Option "RightOf" "TMDS-1" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" ### [arg]: arg optional #Option "NoAccel" # [<bool>] #Option "SWcursor" # [<bool>] #Option "ColorKey" # <i> #Option "CacheLines" # <i> #Option "Dac6Bit" # [<bool>] #Option "DRI" # [<bool>] #Option "NoDDC" # [<bool>] #Option "ShowCache" # [<bool>] #Option "XvMCSurfaces" # <i> #Option "PageFlip" # [<bool>] Identifier "Card0" Driver "intel" VendorName "Intel Corporation" BoardName "Mobile GM965/GL960 Integrated Graphics Controller" BusID "PCI:0:2:0" Option "XvMC" "True" #Option "AccelMethod" "UXA" #Option "AccelMethod" "XAA" #Option "XAANoOffscreenPixmaps" EndSection Section "Screen" Identifier "Screen0" Device "Card0" SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 Virtual 1680 1050 EndSubSection EndSection Section "DRI" Group 0 Mode 0666 EndSection --=-5LA0Ki74Sj2FlFfoGzBx--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1260806661.2281.93.camel>