Date: Tue, 19 Feb 2008 13:36:13 -0500 From: Alex <smart.zeusy@gmail.com> To: freebsd-bugs@freebsd.org Subject: random freeze Message-ID: <47BB219D.3010302@gmail.com>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------040300090301090408010406
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
After a couple of months of usage, i get random freezes.
I'm using the 6.3-PRERELEASE (PC-BSD) on i386 and the generic kernel.
Once, I could kill x during the 4-5 seconds before the systems stop
responding. ( I had to reboot it manually )
There was another line but didn't have the time to write it on paper.
Here is the message:
write_dma48 retrying ( 0 retries left ) LBA 326485055
WARNING - Set_multi taskqueue
Timeout completing request directly
Dmesg is attached.
Google has pretty much nothing interesting to say about it.
I'd like to know if this is a software or hardware problem, and if there
is a fix else than blindly upgrading to 6.3-RELEASE.
ps: Sorry in case I'm not posting at the right mailing list
Thanx, Alex
--------------040300090301090408010406
Content-Type: text/plain;
name="dmesg.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="dmesg.txt"
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.3-PRERELEASE #2: Wed Nov 7 11:08:55 EST 2007
root@pcbsd:/usr/obj/usr/src/sys/PCBSD-SMP
WARNING: Network stack Giant-free, but aio requires Giant.
Consider adding 'options NET_WITH_GIANT' or setting debug.mpsafenet=0
ACPI APIC Table: <INTEL CRESTLNE>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Duo CPU T5250 @ 1.50GHz (1496.26-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6fd Stepping = 13
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe39d<SSE3,RSVD2,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
real memory = 2137849856 (2038 MB)
avail memory = 2082656256 (1986 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <TOSCPL TOSCPL00> on motherboard
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 2000
acpi0: Power Button (fixed)
acpi0: reservation of fed00000, 400 (3) failed
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x62,0x66 on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <display, VGA> at device 2.0 (no driver attached)
pci0: <display> at device 2.1 (no driver attached)
uhci0: <UHCI (generic) USB controller> port 0x1820-0x183f irq 16 at device 26.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x1840-0x185f irq 21 at device 26.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf8504800-0xf8504bff irq 18 at device 26.7 on pci0
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
ugen0: Chicony Electronics Co., Ltd. Chicony USB 2.0 Camera, rev 2.00/3.35, addr 2
pci0: <multimedia> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pci4: <ACPI PCI bus> on pcib2
re0: <RealTek 8101E PCIe 10/100baseTX> port 0x3000-0x30ff mem 0xf0000000-0xf0000fff irq 17 at device 0.0 on pci4
miibus0: <MII bus> on re0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
re0: Ethernet address: 00:1b:38:46:d0:de
re0: [FAST]
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci5: <ACPI PCI bus> on pcib3
pci5: <network> at device 0.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci6: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci9: <ACPI PCI bus> on pcib5
uhci2: <UHCI (generic) USB controller> port 0x1860-0x187f irq 23 at device 29.0 on pci0
uhci2: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci2
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x1880-0x189f irq 19 at device 29.1 on pci0
uhci3: [GIANT-LOCKED]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0x18a0-0x18bf irq 18 at device 29.2 on pci0
uhci4: [GIANT-LOCKED]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xf8504c00-0xf8504fff irq 23 at device 29.7 on pci0
ehci1: [GIANT-LOCKED]
usb6: EHCI version 1.0
usb6: companion controllers, 2 ports each: usb3 usb4 usb5
usb6: <EHCI (generic) USB 2.0 controller> on ehci1
usb6: USB revision 2.0
uhub6: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub6: 6 ports with 6 removable, self powered
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci12: <ACPI PCI bus> on pcib6
cbb0: <PCI-CardBus Bridge> mem 0xf8204000-0xf8204fff irq 16 at device 4.0 on pci12
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fwohci0: <1394 Open Host Controller Interface> mem 0xf8206000-0xf82067ff,0xf8200000-0xf8203fff irq 17 at device 4.1 on pci12
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:02:3f:79:ad:40:d0:83
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:02:3f:40:d0:83
fwe0: Ethernet address: 02:02:3f:40:d0:83
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci12: <mass storage> at device 4.2 (no driver attached)
pci12: <base peripheral> at device 4.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <GENERIC ATA controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <Intel ICH8M SATA300 controller> port 0x1c00-0x1c07,0x18d4-0x18d7,0x18d8-0x18df,0x18d0-0x18d3,0x18e0-0x18ff mem 0xf8504000-0xf85047ff irq 19 at device 31.2 on pci0
atapci1: AHCI Version 01.10 controller with 3 ports detected
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
ata4: <ATA channel 2> on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> flags 0x1000 irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model GlidePoint, device ID 0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xcf000-0xcffff,0xdc000-0xdffff,0xe0000-0xe17ff on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ukbd0: MadCatz MadCatz USB Keyboard, rev 1.10/0.01, addr 2, iclass 3/1
kbd2 at ukbd0
ums0: Logitech Trackball, rev 1.10/2.20, addr 3, iclass 3/1
ums0: 3 buttons and Z dir.
Timecounters tick every 1.000 msec
acd0: DVDR <TSSTcorpCD/DVDW TS-L632D/TO04> at ata0-master UDMA33
ad0: 190782MB <TOSHIBA MK2035GSS DK020M> at ata2-master SATA150
ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT1._BIF] (Node 0xc6816d60), AE_NO_HARDWARE_RESPONSE
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
SMP: AP CPU #1 Launched!
cd0 at ata0 bus 0 target 0 lun 0
cd0: <TSSTcorp CD/DVDW TS-L632D TO04> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: cd present [1212688 x 2048 byte records]
Trying to mount root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
ppc0: parallel port not found.
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
ppc0: parallel port not found.
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
ppc0: parallel port not found.
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
ppc0: parallel port not found.
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
pcm0: <Intel 82801H High Definition Audio Controller> mem 0xf8500000-0xf8503fff irq 22 at device 27.0 on pci0
pcm0: <HDA Codec: Realtek ALC268>
pcm0: <HDA Driver Revision: 20071020_0048>
ppc0: parallel port not found.
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
ppc0: parallel port not found.
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
ppc0: parallel port not found.
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
--------------040300090301090408010406--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?47BB219D.3010302>