Date: Sun, 3 Nov 2013 17:34:30 -0500 From: Jerry <jerry@seibercom.net> To: freebsd-ports@freebsd.org Subject: Re: Updating linux-f10-pango fails Message-ID: <20131103173430.6a397cc9@scorpio> In-Reply-To: <20131103230334.16b33efe@kalimero.tijl.coosemans.org> References: <20131015065816.4be007fb@scorpio> <CADL2u4hSVcaH2fDYJQ2=bj5RKCpRzyUE9GWbH1kNQO0paULuxg@mail.gmail.com> <525D3C65.7050501@passap.ru> <525E8715.9000205@freebsd.org> <20131016211703.00006ed9@unknown> <525EEEFB.6050403@FreeBSD.org> <20131103183004.6364bc18@kalimero.tijl.coosemans.org> <20131103230334.16b33efe@kalimero.tijl.coosemans.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, 3 Nov 2013 23:03:34 +0100
Tijl Coosemans articulated:
> On Sun, 3 Nov 2013 18:30:04 +0100 Tijl Coosemans wrote:
> > On Wed, 16 Oct 2013 21:54:35 +0200 Matthias Andree wrote:
> >> Am 16.10.2013 21:17, schrieb Alexander Leidinger:
> >>> On Wed, 16 Oct 2013 14:31:17 +0200
> >>> René Ladan <rene@freebsd.org> wrote:
> >>>> On 15-10-2013 15:00, Boris Samorodov wrote:
> >>>>> 15.10.2013 15:08, René Ladan ?????:
> >>>>>> Here tar gets confused somehow, it wants to pack
> >>>>>> ${STAGEDIR}/usr/compat/linux (note the extra usr/ ), which
> >>>>>> fails consequently.
> >>>>>
> >>>>> Does the affected system (poudiere jail) use links, like
> >>>>> /compat -> /usr/compat?
> >>>>
> >>>> Mine does not have a /usr/compat -> /compat link (nor the other
> >>>> way around), and /compat is only created when
> >>>> building/installing linux ports (or other ports that require it).
> >>>
> >>> A normal install creates (or used to create, so at least there
> >>> are old systems with this) the link /compat -> /usr/compat, so
> >>> maybe somewhere realpath comes into use and exhibits a problem
> >>> here ("here" being the staging support in general, not limited to
> >>> the port).
> >>
> >> I think I can confirm your assessment.
> >>
> >>
> >> René,
> >>
> >> I had the same issue as Jerry (as reported on IRC, on
> >> 9.1-RELEASE-amd64), but did not dig deeper.
> >>
> >> In the end I sidestepped the problem because I could not solve it;
> >> meaning I used poudriere to build the package and installed that
> >> through pkg_add. That is not the canonical way to do that.
> >>
> >> I think I can confirm Alexanders suspicion.
> >>
> >> I do have the symbolic link that Alexander states:
> >>
> >> $ ls -l /compat
> >> lrwxr-xr-x 1 root wheel 10 10 Okt 2009 /compat -> usr/compat
> >>
> >> "make package" in the actual system fails (poudriere is fine for
> >> me, too).
> >>
> >> So perhaps either Poudriere sets up the jail a touch differently
> >> than a regular system would install it (possibly through
> >> sysinstall or whatever I used to get 9.1, I do not remember).
> >>
> >>
> >> Now, my workaround that makes "make package" work is to alias the
> >> file systems instead of :
> >>
> >> # mv /compat /compat.off
> >> # mkdir /compat && mount_nullfs /usr/compat /compat
> >>
> >> (Further hints below.)
> >>
> >> Then:
> >>
> >> $ make package
> >> ===> Building package for linux-f10-pango-1.28.3_1
> >> Creating package
> >> /var/tmp/usr/ports.svn/x11-toolkits/linux-f10-pango/work/linux-f10-pango-1.28.3_1.tbz
> >> Registering depends: linux-f10-cairo-1.8.0_2
> >> linux-f10-xorg-libs-7.4_1 linux-f10-fontconfig-2.6.0
> >> linux-f10-expat-2.0.1 linux-f10-png-1.2.37_2 linux_base-f10-10_7.
> >> Registering conflicts: linux-pango-[0-9]* linux-f8-pango-[0-9]*.
> >> Creating bzip'd tar ball in
> >> '/var/tmp/usr/ports.svn/x11-toolkits/linux-f10-pango/work/linux-f10-pango-1.28.3_1.tbz'
> >> $
> >>
> >> *This would seem to confirm that the symlink is the trigger for the
> >> problem.*
> >>
> >>
> >> Now, for the archives, further hints:
> >>
> >> 1. to make the change permanent, add one line to /etc/fstab so the
> >> mount gets re-established after reboot
> >>
> >> # printf '/usr/compat\t\t/compat\t\tnullfs\trw\t\t0\t0\n'
> >> >> /etc/fstab
> >>
> >> 2. if instead you want to revert the change:
> >>
> >> # umount /compat
> >> # rmdir /compat && mv /compat.off /compat
> >> # sed -i.bak -e '/^\/usr\/compat/d' /etc/fstab
> >>
> >> 3. if /compat gets destroyed:
> >>
> >> # ln -sfn usr/compat /compat
> >>
> >>
> >> I hope portmgr can investigate and fix this problem.
> >
> > If there's no immediate fix for this can it please be reverted.
> > Everybody who has separate / and /usr partitions has a /compat ->
> > /usr/compat link because you don't want to install packages on the
> > root file system. This includes pretty much everyone running
> > FreeBSD 8 because the installer creates separate partitions by
> > default there.
>
> I've looked into this a bit deeper. The call to realpath in
> pkg_create has been introduced in:
> http://svnweb.freebsd.org/base?view=revision&revision=231300
>
> This revision has been MFCed to stable/8 between releng/8.3 and
> releng/8.4 and to stable/9 between releng/9.0 and releng/9.1.
>
> The call has been disabled for absolute path names in
> http://svnweb.freebsd.org/base?view=revision&revision=240682
>
> This revision has been MFCed to stable/8 between releng/8.3 and
> releng/8.4 and to stable/9 between releng/9.1 and releng/9.2.
>
> So only FreeBSD 9.1 is affected by this.
>
> People in this thread running stable should just update. If you run
> FreeBSD 9.1 a workaround is to switch to the new pkg tools.
I can confirm that the build fails on FreeBSD 8.3.
FreeBSD scorpio.seibercom.net 8.3-STABLE FreeBSD 8.3-STABLE #0: Fri Aug 17 13:52:14 EDT 2012 jerry@scorpio.seibercom.net:/usr/obj/usr/src/sys/SCORPIO amd64
build via portupgrade:
env UPGRADE_TOOL=portupgrade UPGRADE_PORT=linux-f10-pango-1.28.3 UPGRADE_PORT_VER=1.28.3 make clean
===> Cleaning for linux-f10-pango-1.28.3_1
env UPGRADE_TOOL=portupgrade UPGRADE_PORT=linux-f10-pango-1.28.3 UPGRADE_PORT_VER=1.28.3 make
=> pango-1.28.3-1.fc10.i386.rpm doesn't seem to exist in /usr/ports/distfiles/rpm/i386/fedora/10.
=> Attempting to fetch http://ftp.FreeBSD.org/pub/FreeBSD/ports/local-distfiles/netchild/rpms/fedora10/pango-1.28.3-1.fc10.i386.rpm
^Mpango-1.28.3-1.fc10.i386.rpm 0% of 378 kB 0 Bps^Mpango-1.28.3-1.fc10.i386.rpm 29% of 378 kB 137 kBps^Mpango-1.28.3-1.fc10.i386.rpm 100% of 378 kB 279 kBps
===> Fetching all distfiles required by linux-f10-pango-1.28.3_1 for building
===> Extracting for linux-f10-pango-1.28.3_1
=> SHA256 Checksum OK for rpm/i386/fedora/10/pango-1.28.3-1.fc10.i386.rpm.
===> Patching for linux-f10-pango-1.28.3_1
===> Configuring for linux-f10-pango-1.28.3_1
env UPGRADE_TOOL=portupgrade UPGRADE_PORT=linux-f10-pango-1.28.3 UPGRADE_PORT_VER=1.28.3 make reinstall
===> Staging for linux-f10-pango-1.28.3_1
===> linux-f10-pango-1.28.3_1 depends on file: /compat/linux/etc/fedora-release - found
===> linux-f10-pango-1.28.3_1 depends on file: /compat/linux/usr/lib/libcairo.so.2.10800.0 - found
===> linux-f10-pango-1.28.3_1 depends on file: /compat/linux/lib/libexpat.so.1 - found
===> linux-f10-pango-1.28.3_1 depends on file: /compat/linux/usr/lib/libfontconfig.so.1.3.0 - found
===> linux-f10-pango-1.28.3_1 depends on file: /compat/linux/usr/lib/libpng.so.3.37.0 - found
===> linux-f10-pango-1.28.3_1 depends on file: /compat/linux/usr/lib/libXrandr.so.2.1.0 - found
===> Generating temporary packing list
cd /usr/ports/x11-toolkits/linux-f10-pango/work && /usr/bin/find * ! -path "stage*" -type d -exec /bin/mkdir -p "/usr/ports/x11-toolkits/linux-f10-pango/work/stage/compat/linux/{}" \;
cd /usr/ports/x11-toolkits/linux-f10-pango/work && /usr/bin/find * ! -path "stage/*" ! -type d | /usr/bin/cpio -pm -R root:wheel /usr/ports/x11-toolkits/linux-f10-pango/work/stage/compat/linux
1776 blocks
====> Compressing man pages (compress-man)
====> Running Q/A tests (stage-qa)
===> Building package for linux-f10-pango-1.28.3_1
Creating package /usr/ports/x11-toolkits/linux-f10-pango/work/linux-f10-pango-1.28.3_1.tbz
Registering depends: linux-f10-cairo-1.8.0_2 linux-f10-xorg-libs-7.4_1 linux-f10-fontconfig-2.6.0 linux-f10-expat-2.0.1 linux-f10-png-1.2.37_2 linux_base-f10-10_7.
Registering conflicts: linux-pango-[0-9]* linux-f8-pango-[0-9]*.
Creating bzip'd tar ball in '/usr/ports/x11-toolkits/linux-f10-pango/work/linux-f10-pango-1.28.3_1.tbz'
tar: could not chdir to '/usr/ports/x11-toolkits/linux-f10-pango/work/stage/usr/compat/linux'
pkg_create: make_dist: tar command failed with code 256
*** Error code 1
Stop in /usr/ports/x11-toolkits/linux-f10-pango.
*** Error code 1
Stop in /usr/ports/x11-toolkits/linux-f10-pango.
--
Jerry ♔
Disclaimer: off-list followups get on-list replies or get ignored.
Please do not ignore the Reply-To header.
__________________________________________________________________
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20131103173430.6a397cc9>