Date: Wed, 30 Oct 2002 15:25:29 +0100 From: =?iso-8859-1?B?UmFnbmFyIFdpc2z4ZmY=?= <ragnar@wisloff.no> To: aic7xxx@FreeBSD.ORG Subject: AIC-7896 boot problems - more info Message-ID: <1035987929.3dbfebd9a5edb@ragnar.mine.nu>
next in thread | raw e-mail | index | archive | help
Perhaps the dmesg logs will help.
Excerpts from what it used to look like when it was running
2.2.14 (rhl 6.2):
(scsi0) <Adaptec AIC-7896/7 Ultra2 SCSI host adapter> found at
PCI 0/12/0
(scsi0) Wide Channel A, SCSI ID=7, 32/255 SCBs
(scsi0) Downloading sequencer code... 396 instructions downloaded
enable_irq() unbalanced from fc81b415
(scsi1) <Adaptec AIC-7896/7 Ultra2 SCSI host adapter> found at
PCI 0/12/1
(scsi1) Wide Channel B, SCSI ID=7, 32/255 SCBs
(scsi1) Downloading sequencer code... 396 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI)
5.1.28/3.2.4
<Adaptec AIC-7896/7 Ultra2 SCSI host adapter>
scsi1 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI)
5.1.28/3.2.4
<Adaptec AIC-7896/7 Ultra2 SCSI host adapter>
scsi : 2 hosts.
DAC960: ***** DAC960 RAID Driver Version 2.2.4 of 23 August 1999
*****
DAC960: Copyright 1998-1999 by Leonard N. Zubkoff
<lnz@dandelion.com>
DAC960#0: Configuring Mylex DAC1164P PCI RAID Controller
DAC960#0: Firmware Version: 5.07-0-79, Channels: 2, Memory
Size: 32MB
DAC960#0: PCI Bus: 3, Device: 8, Function: 0, I/O Address:
Unassigned
DAC960#0: PCI Address: 0xF4210000 mapped at 0xFC839000, IRQ
Channel: 20
DAC960#0: Controller Queue Depth: 128, Maximum Blocks per
Command: 128
DAC960#0: Driver Queue Depth: 127, Maximum Scatter/Gather
Segments: 33
DAC960#0: Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry:
255/63
DAC960#0: SAF-TE Enclosure Management Enabled
DAC960#0: Physical Devices:
DAC960#0: 0:0 Vendor: IBM Model: DPSS-336950M
Revision: S80D
DAC960#0: Serial Number: ZF084016
DAC960#0: Disk Status: Online, 72169472 blocks
DAC960#0: 0:1 Vendor: IBM Model: DPSS-336950M
Revision: S80D
DAC960#0: Serial Number: ZF084083
DAC960#0: Disk Status: Online, 72169472 blocks
DAC960#0: 0:2 Vendor: IBM Model: DPSS-336950M
Revision: S80D
DAC960#0: Serial Number: ZF085207
DAC960#0: Disk Status: Online, 72169472 blocks
DAC960#0: 0:3 Vendor: IBM Model: DPSS-336950M
Revision: S80D
DAC960#0: Serial Number: ZF070211
DAC960#0: Disk Status: Online, 72169472 blocks
DAC960#0: 0:4 Vendor: IBM Model: DPSS-336950M
Revision: S80D
DAC960#0: Serial Number: ZF084147
DAC960#0: Disk Status: Standby, 72170880 blocks
DAC960#0: 0:6 Vendor: ESG-SHV Model: SCA HSBP M6
Revision: 0.61
DAC960#0: 0:7 Vendor: MYLEX Model: DAC1164P
Revision: 0507
DAC960#0: Serial Number:
DAC960#0: 1:7 Vendor: MYLEX Model: DAC1164P
Revision: 0507
DAC960#0: Serial Number:
DAC960#0: Logical Drives:
DAC960#0: /dev/rd/c0d0: RAID-5, Online, 20975616 blocks,
Write Thru
DAC960#0: /dev/rd/c0d1: RAID-5, Online, 195532800 blocks,
Write Thru
rd/c0d0: rd/c0d0p1 rd/c0d0p2 rd/c0d0p3 rd/c0d0p4 < rd/c0d0p5
rd/c0d0p6 >
rd/c0d1: rd/c0d1p1
autodetecting RAID arrays
autorun ...
... autorun DONE.
The problems after it tries to boot 2.4.18-14
scsi1:0:15:0: Attempting to queue an ABORT message
scsi1: Dumping Card State while idle, at SEQADDR 0x48
ACCUM = 0x2, SINDEX = 0x48, DINDEX = 0xe4, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x0
SCSISEQ = 0x12, SBLKCTL = 0x6
DFCNTRL = 0x0, DFSTATUS = 0x89
LASTPHASE = 0x1, SCSISIGI = 0x0, SXFRCTL0 = 0x80
SSTAT0 = 0x0, SSTAT1 = 0x0
STACK == 0x3, 0x0, 0x0, 0x175
SCB count = 4
Kernel NEXTQSCB = 3
Card NEXTQSCB = 3
QINFIFO entries:
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
Sequencer SCB Info: 0(c 0x0, s 0xf7, l 0, t 0xff) 1(c 0x0, s
0xff, l 255, t 0xff) 2(c 0x0, s 0xff, l 255, t 0xff) 3(c 0x0, s
0xff, l 255, t 0xff) 4(c 0x0, s 0xff, l 255, t 0xff) 5(c 0x0, s
0xff, l 255, t 0xff) 6(c 0x0, s 0xff, l 255, t 0xff) 7(c 0x0, s
0xff, l 255, t 0xff) 8(c 0x0, s 0xff, l 255, t 0xff) 9(c 0x0, s
0xff, l 255, t 0xff) 10(c 0x0, s 0xff, l 255, t 0xff) 11(c 0x0, s
0xff, l 255, t 0xff) 12(c 0x0, s 0xff, l 255, t 0xff) 13(c 0x0, s
0xff, l 255, t 0xff) 14(c 0x0, s 0xff, l 255, t 0xff) 15(c 0x0, s
0xff, l 255, t 0xff) 16(c 0x0, s 0xff, l 255, t 0xff) 17(c 0x0, s
0xff, l 255, t 0xff) 18(c 0x0, s 0xff, l 255, t 0xff) 19(c 0x0, s
0xff, l 255, t 0xff) 20(c 0x0, s 0xff, l 255, t 0xff) 21(c 0x0, s
0xff, l 255, t 0xff) 22(c 0x0, s 0xff, l 255, t 0xff) 23(c 0x0, s
0xff, l 255, t 0xff) 24(c 0x0, s 0xff, l 255, t 0xff) 25(c 0x0, s
0xff, l 255, t 0xff) 26(c 0x0, s 0xff, l 255, t 0xff) 27(c 0x0, s
0xff, l 255, t 0xff) 28(c 0x0, s 0xff, l 255, t 0xff) 29(c 0x0, s
0xff, l 255, t 0xff) 30(c 0x0, s 0xff, l 255, t 0xff) 31(c 0x0, s
0xff, l 255, t 0xff)
Pending list:
Kernel Free SCB list: 2 1 0
scsi1:0:15:0: Command already completed
aic7xxx_abort returns 0x2002
Then when it is booted with the CD using rescue mode, also 2.4.18:
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
<Adaptec aic7896/97 Ultra2 SCSI adapter>
aic7896/97: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
<Adaptec aic7896/97 Ultra2 SCSI adapter>
aic7896/97: Ultra2 Wide Channel B, SCSI Id=7, 32/253 SCBs
blk: queue f7462214, I/O limit 4095Mb (mask 0xffffffff)
blk: queue f7462214, I/O limit 4095Mb (mask 0xffffffff)
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
usb.c: deregistering driver usb-storage
DAC960: ***** DAC960 RAID Driver Version 2.4.11 of 11 October
2001 *****
DAC960: Copyright 1998-2001 by Leonard N. Zubkoff
<lnz@dandelion.com>
DAC960#0: Configuring Mylex DAC1164P PCI RAID Controller
DAC960#0: Firmware Version: 5.07-0-79, Channels: 2, Memory
Size: 32MB
DAC960#0: PCI Bus: 3, Device: 8, Function: 0, I/O Address:
Unassigned
DAC960#0: PCI Address: 0xF4210000 mapped at 0xF885F000, IRQ
Channel: 20
DAC960#0: Controller Queue Depth: 128, Maximum Blocks per
Command: 128
DAC960#0: Driver Queue Depth: 127, Scatter/Gather Limit: 33 of
33 Segments
DAC960#0: Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry:
255/63
DAC960#0: SAF-TE Enclosure Management Enabled
DAC960#0: Physical Devices:
DAC960#0: 0:0 Vendor: IBM Model: DPSS-336950M
Revision: S80D
DAC960#0: Serial Number: ZF084016
DAC960#0: Disk Status: Online, 72169472 blocks
DAC960#0: 0:1 Vendor: IBM Model: DPSS-336950M
Revision: S80D
DAC960#0: Serial Number: ZF084083
DAC960#0: Disk Status: Online, 72169472 blocks
DAC960#0: 0:2 Vendor: IBM Model: DPSS-336950M
Revision: S80D
DAC960#0: Serial Number: ZF085207
DAC960#0: Disk Status: Online, 72169472 blocks
DAC960#0: 0:3 Vendor: IBM Model: DPSS-336950M
Revision: S80D
DAC960#0: Serial Number: ZF070211
DAC960#0: Disk Status: Online, 72169472 blocks
DAC960#0: 0:4 Vendor: IBM Model: DPSS-336950M
Revision: S80D
DAC960#0: Serial Number: ZF084147
DAC960#0: Disk Status: Standby, 72170880 blocks
DAC960#0: 0:6 Vendor: ESG-SHV Model: SCA HSBP M6
Revision: 0.61
DAC960#0: 0:7 Vendor: MYLEX Model: DAC1164P
Revision: 0507
DAC960#0: Serial Number:
DAC960#0: 1:7 Vendor: MYLEX Model: DAC1164P
Revision: 0507
DAC960#0: Serial Number:
DAC960#0: Logical Drives:
DAC960#0: /dev/rd/c0d0: RAID-5, Online, 20975616 blocks,
Write Thru
DAC960#0: /dev/rd/c0d1: RAID-5, Online, 195532800 blocks,
Write Thru
Partition check:
rd/c0d0: rd/c0d0p1 rd/c0d0p2 rd/c0d0p3 rd/c0d0p4 < rd/c0d0p5
rd/c0d0p6 >
rd/c0d1: rd/c0d1p1
I hope this helps debugging.
--
Mvh Ragnar Wisløff
------------------
life is a reach. then you gybe.
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe aic7xxx" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1035987929.3dbfebd9a5edb>