Date: Tue, 10 Feb 2004 23:08:45 +0100 From: "Benjamin Thelen (CCGIS)" <thelen@ccgis.de> To: freebsd-questions@FreeBSD.org Subject: FreeBSD 4.9: Server Works GCSL --> unknown chipset Message-ID: <4029566D.5080305@ccgis.de>
next in thread | raw e-mail | index | archive | help
Hello list,
First off, the environment:
FreeBSD 4.9 RELEASE,
Intel P4 3GH with HTT enabled
Mainboard ASUS NRL-L533
North Bridge: ServerWorks CMIC-SL
South Bridge: ServerWorks CSB6
I checked google and the mailing list archive but couldn't find helpful
(for me) information on this.
A client brought us a server to install FreeBSD 4.9 on it, but the
chipset isn't recognized by the system. I had to disable DMA in the BIOS
to get FreeBSD booting off the IDE-HDD. I then read the Hardware Release
notes (I know, it's too late):
FreeBSD 4.9: ServerWorks CSB5 ATA66/ATA100
FreeBSD 5.2: ServerWorks CSB5 and CSB6 ATA66/ATA10
According to this, it is the only way to install 5.2? Would 4.9-stable
recognize the chipset? Is that lack fundamental to the whole system or
would it suffice to just buy a new IDE-Controller?
I was so happy to have our client conviced of FreeBSD, that it would be
a pity, if that faild now.
Thanks very much in advance,
Benjamin
dmesg:
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.9-RELEASE #0: Mon Oct 27 17:51:09 GMT 2003
root@freebsd-stable.sentex.ca:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Intel(R) Pentium(R) 4 CPU 3.06GHz (3065.82-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CM
OV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 1073721344 (1048556K bytes)
avail memory = 1039736832 (1015368K bytes)
Preloaded elf kernel "kernel" at 0xc053f000.
Warning: Pentium 4 CPU: PSE disabled
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 10 entries at 0xc00f1ce0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard
pci0: <PCI bus> on pcib0
bge0: <Broadcom BCM5702 Gigabit Ethernet, ASIC rev. 0x1002> mem
0xfe000000-0xfe00
ffff irq 12 at device 3.0 on pci0
bge0: Ethernet address: 00:0c:6e:ec:8f:0d
miibus0: <MII bus> on bge0
brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-
FDX, auto
pci0: <ATI Mach64-GR graphics accelerator> at 9.0 irq 10
isab0: <PCI to ISA bridge (vendor=1166 device=0203)> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Generic PCI ATA controller> port
0x9400-0x940f,0x9800-0x9803,0xa000-0xa
007,0xa400-0xa403,0xa800-0xa807 at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xfc000000-0xfc000fff irq 11
at device
15.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pcib255: <ServerWorks host to PCI bridge(unknown chipset)> on
motherboard pci255: <PCI bus> on pcib255
pcib1: <Host to PCI bridge> on motherboard
pci1: <PCI bus> on pcib1
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
pmtimer0 on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0 sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: parallel port not found.
ad0: 114473MB <WDC WD1200JB-00FUA0> [232581/16/63] at ata0-master
BIOSDMA ad1: 114473MB <WDC WD1200JB-00FUA0> [232581/16/63] at ata0-slave
WDMA2 acd0: DVD-ROM <IDE DVD-ROM 16X> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
stray irq 7
stray irq 7
stray irq 7
stray irq 7
stray irq 7
too many stray irq 7's; not logging any more
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4029566D.5080305>