Date: Sun, 17 Jan 2016 18:59:18 +0100 From: Willem Jan Withagen <wjw@digiware.nl> To: Stanislav Galabov <sgalabov@gmail.com> Cc: "freebsd-mips@freebsd.org" <freebsd-mips@freebsd.org> Subject: Re: Ralink/MediaTek support progress Message-ID: <569BD676.9040506@digiware.nl> In-Reply-To: <569BCB17.7010807@digiware.nl> References: <BE3D0D94-4152-47CE-B010-E5D71ED595B3@gmail.com> <881F0883-BEAE-48A2-AB13-F689CE550DA3@gmail.com> <569BBE18.9030407@digiware.nl> <84A69225-ECF3-4B16-B1E8-CED754A67F16@gmail.com> <569BCB17.7010807@digiware.nl>
next in thread | previous in thread | raw e-mail | index | archive | help
On 17-1-2016 18:10, Willem Jan Withagen wrote: > On 17-1-2016 17:54, Stanislav Galabov wrote: >> >> Hi Willem, >> >> The right branch is local/sgalabov_mtk. >> > > That helps... > > Thanx, > --WjW With the rest of the compile/build info on the MIPS Wiki: https://wiki.freebsd.org/FreeBSD/mips/RT3052F I get, the appended console at 56700 bit/s, so the kernel is booting. Now I just have to find out to either get an md in the right place. Config NFS Or get it to use the /dev/sd0s1a device, like it did before, which i guess would be hard since the bits and pieces are not yet in the config. --WjW Filename 'test.bin'. TIMEOUT_COUNT=10,Load address: 0x80a00000 Loading: Got ARP REPLY, set server/gtwy eth addr (1c:6f:65:82:ec:12) Got it ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ####################### done Bytes transferred = 3444372 (348e94 hex) NetBootFileXferSize= 00348e94 Erasing SPI Flash... . Writing to SPI Flash... . done Automatic boot of image at addr 0x80A00000 ... ## Booting image at 80a00000 ... Image Name: FreeBSD Kernel Image Image Type: MIPS Linux Kernel Image (uncompressed) Data Size: 3444308 Bytes = 3.3 MB Load Address: 80001100 Entry Point: 80001100 Verifying Checksum ... OK OK No initrd ## Transferring control to Linux (at address 80001100) ... ## Giving linux memsize in MB, 256 Starting kernel ... FDT DTB at: 0x8031ef10 CPU clock: 880MHz SYS clock: 220MHz UART clock: 50MHz U-Boot args (from 0 args): None Environment: memsize=256 initrd_start=0x00000000 initrd_size=0x0 flash_start=0x00000000 flash_size=0x1000000 entry: mips_init() Cache info: picache_stride = 4096 picache_loopcount = 8 pdcache_stride = 4096 pdcache_loopcount = 8 cpu0: MIPS Technologies processor v47.153 MMU: Standard TLB, 32 entries (4K 16K 64K 256K 1M 16M 64M 256M pg sizes) L1 i-cache: 4 ways of 256 sets, 32 bytes per line L1 d-cache: 4 ways of 256 sets, 32 bytes per line L2 cache: 8 ways of 1024 sets, 32 bytes per line, 256 KiB total size Config1=0xbea3519e<PerfCount,WatchRegs,MIPS16,EJTAG> Config2=0x80000447 Config3=0x2000242c Physical memory chunk(s): 0x3d3000 - 0xfffffff, 264425472 bytes (64557 pages) Maxmem is 0x10000000 KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2016 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 11.0-CURRENT #0 041b950(local/sgalabov_mtk): Sun Jan 17 18:11:32 CET 2016 wjw@freetest.digiware.nl:/usr/obj/mips.mipsel/usr/srcs/Mips/MT6721/freebsd/sys/MT7621 mips gcc version 4.2.1 20070831 patched [FreeBSD] WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "kernel" at 0x803ca650. real memory = 268435456 (262144K bytes) Physical memory chunk(s): 0x0045f000 - 0x0fb50fff, 258940928 bytes (63218 pages) avail memory = 254562304 (242MB) ULE: setup cpu 0 random: entropy device external interface mem: <memory> null: <full device, null device, zero device> openfirm: <Open Firmware control device> nexus0: <MIPS32 root nexus> random: harvesting attach, 8 bytes (4 bits) from nexus0 ofwbus0: <Open Firmware Device Tree> on nexus0 simplebus0: <Flattened device tree simple bus> mem 0x1e000000-0x1e1fffff on ofwbus0 simplebus1: <Flattened device tree simple bus> mem 0x1e000000-0x1e0fffff on simplebus0 random: harvesting attach, 8 bytes (4 bits) from simplebus1 random: harvesting attach, 8 bytes (4 bits) from simplebus0 random: harvesting attach, 8 bytes (4 bits) from ofwbus0 sysc0: <MTK System Control driver> mem 0-0xff on simplebus1 sysc0: Chip ID: MT7621 sysc0: GPIOMODE: 0x0004042c random: harvesting attach, 8 bytes (4 bits) from sysc0 mips_pic0: <MIPS32 Interrupt Controller> on ofwbus0 random: harvesting attach, 8 bytes (4 bits) from mips_pic0 intc0: <MTK GIC Controller> mem 0x1fbc0000-0x1fbcffff irq 0 on ofwbus0 random: harvesting attach, 8 bytes (4 bits) from intc0 gpio0: <MTK GPIO Controller> mem 0x600-0x6ff irq 2 on simplebus1 random: harvesting attach, 8 bytes (4 bits) from gpio0 gpio1: <MTK GPIO Controller> mem 0x600-0x6ff irq 2 on simplebus1 random: harvesting attach, 8 bytes (4 bits) from gpio1 gpiobus0: <OFW GPIO bus> on gpio0 random: harvesting attach, 8 bytes (4 bits) from gpiobus0 gpioc0: <GPIO controller> on gpio0 random: harvesting attach, 8 bytes (4 bits) from gpioc0 gpiobus1: <OFW GPIO bus> on gpio1 random: harvesting attach, 8 bytes (4 bits) from gpiobus1 gpioc1: <GPIO controller> on gpio1 random: harvesting attach, 8 bytes (4 bits) from gpioc1 uart0: <MTK UART (16550 compatible)> mem 0xc00-0xcff irq 3 on simplebus1 uart0: console (57870,n,8,1) uart0: fast interrupt uart0: PPS capture mode 2 (DCD) random: harvesting attach, 8 bytes (4 bits) from uart0 spi0: <MTK SPI (new)> mem 0xb00-0xbff on simplebus1 spibus0: <OFW SPI bus> on spi0 mx25l0: <M25Pxx Flash Family> at cs 0 on spibus0 Unknown SPI flash device. Vendor: c8, device id: 4018 device_attach: mx25l0 attach returned 6 random: harvesting attach, 8 bytes (4 bits) from spibus0 random: harvesting attach, 8 bytes (4 bits) from spi0 rt0: <Ralink RT7621 onChip Ethernet driver> mem 0x1e100000-0x1e10ffff irq 1 on simplebus0 rt0: RT7621 Ethernet MAC (rev 0x00000000) rt0: use hardcoded 00:18:e7:d5:83:90 macaddr rt0: bpf attached rt0: Ethernet address: 00:18:e7:d5:83:90 random: harvesting attach, 8 bytes (4 bits) from rt0 clock0: <Generic MIPS32 ticker> on nexus0 Timecounter "MIPS32" frequency 440000000 Hz quality 800 Event timer "MIPS32" frequency 440000000 Hz quality 800 random: harvesting attach, 8 bytes (4 bits) from clock0 Device configuration finished. Timecounters tick every 10.000 msec tcp_init: net.inet.tcp.tcbhashsize auto tuned to 4096 lo0: bpf attached WARNING: WITNESS option enabled, expect reduced performance. Trying to mount root from ufs:md0.uncompress []... mountroot: waiting for device md0.uncompress... Mounting from ufs:md0.uncompress failed with error 19. Loader variables: Manual root filesystem specification: <fstype>:<device> [options] Mount <device> using filesystem <fstype> and with the specified (optional) option list. eg. ufs:/dev/da0s1a zfs:tank cd9660:/dev/cd0 ro (which is equivalent to: mount -t cd9660 -o ro /dev/cd0 /) ? List valid disk boot devices . Yield 1 second (for background tasks) <empty line> Abort manual input mountroot> ufs:/dev/da0s1a Trying to mount root from ufs:/dev/da0s1a []... mountroot: waiting for device /dev/da0s1a... Mounting from ufs:/dev/da0s1a failed with error 19.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?569BD676.9040506>