Date: Thu, 26 Feb 2009 15:10:11 +1100 (EST) From: Ian Smith <smithi@nimnet.asn.au> To: Maciej Piechotka <uzytkownik2@gmail.com> Cc: freebsd-questions@freebsd.org Subject: Re: Problem with speedtouch 330 Message-ID: <20090226145851.G71460@sola.nimnet.asn.au> In-Reply-To: <20090224192338.43AF81065701@hub.freebsd.org> References: <20090224192338.43AF81065701@hub.freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, 24 Feb 2009 19:00:17 +0100 Maciej Piechotka <uzytkownik2@gmail.com> wrote: > Hello. I have a problem with Speedtouch 330. I cannot connect with my > IPS. In dmesg it is written that the modem_run cannot 'read interrupts'. > > Regards > > ppp.conf: > default: > set log Phase Chat LCP IPCP CCP tun command > ident user-ppp VERSION (built COMPILATIONDATE) > set ifaddr 10.0.0.1/0 10.0.0.2/0 > > adsl: > set authname mjnysqqx@webnet24.pl > set authkey 53T6gbDt You should change this password, now that you've published it. > set device !"/usr/local/sbin/pppoa2 -vpi 0 -vci 35 -v 1 -d /dev/ugen0" > accep chap It's 'accept', though the abbreviation does work (see below). > set sppeed sync It's 'speed'. > set timeout 0 > set reconnect 10 100 > #enable lqr > #set lqrperiod 5 > #set radial 15 1000 > #set dial "" > add default HISADDR > #enable dns > > ppp.log: > Feb 23 20:54:33 HOSTNAME ppp[961]: Phase: Using interface: tun0 > Feb 23 20:54:33 HOSTNAME ppp[961]: Phase: deflink: Created in closed > state > Feb 23 20:54:48 HOSTNAME ppp[961]: tun0: Command: default: ident > user-ppp VERSION (built COMPILATIONDATE) > Feb 23 20:54:48 HOSTNAME ppp[961]: tun0: Command: default: set ifaddr > 10.0.0.1/0 10.0.0.2/0 > Feb 23 20:54:48 HOSTNAME ppp[961]: tun0: Command: adsl: set authname > ******@webnet24.pl > Feb 23 20:54:48 HOSTNAME ppp[961]: tun0: Command: adsl: set authkey > ******** > Feb 23 20:54:48 HOSTNAME ppp[961]: tun0: Command: adsl: set > device !/usr/local/sbin/pppoa3 -vpi 0 -vci 35 -v 1 > Feb 23 20:54:48 HOSTNAME ppp[961]: tun0: Command: adsl: accep chap > Feb 23 20:54:48 HOSTNAME ppp[961]: tun0: Command: adsl: set spped sync > Feb 23 20:54:48 HOSTNAME ppp[961]: tun0: Warning: set spped: Invalid > command > Feb 23 20:54:48 HOSTNAME ppp[961]: tun0: Warning: set spped: Failed 1 See above (though this indicates a *different* misspelling of 'speed') > Feb 23 20:54:48 HOSTNAME ppp[961]: tun0: Command: adsl: set timeout 0 > Feb 23 20:54:48 HOSTNAME ppp[961]: tun0: Command: adsl: enable lqr > Feb 23 20:54:48 HOSTNAME ppp[961]: tun0: Command: adsl: set lqrperiod 5 > Feb 23 20:54:48 HOSTNAME ppp[961]: tun0: Command: adsl: set radial 15 > 1000 > Feb 23 20:54:48 HOSTNAME ppp[961]: tun0: Warning: set radial: Invalid > command > Feb 23 20:54:48 HOSTNAME ppp[961]: tun0: Warning: set radial: Failed 1 Try 'redial'. This log also doesn't match the config shown above. cheers, Ian
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20090226145851.G71460>