Date: Wed, 08 Dec 2004 14:57:34 +1300 From: Mail Admin <mailadmin@eyede.com> To: freebsd-questions@freebsd.org Cc: =?ISO-8859-1?Q?M=E1rio_Gamito?= <gamito@netual.pt> Subject: Re: Intel ICH5 SATA controler on FreeBSD 5.3 Message-ID: <41B65F8E.7010102@eyede.com> In-Reply-To: <41B659F2.90901@netual.pt> References: <41B659F2.90901@netual.pt>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi, I have it working, though could not manage to get the hardware RAID going: atapci0: <Intel ICH5 UDMA100 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 atapci1: <Intel ICH5 SATA150 controller> port 0xdc00-0xdc0f,0xe000-0xe003,0xe400-0xe407,0xe800-0xe803,0xec00-0xec07 irq 18 at device 31.2 on pci0 ata2: channel #0 on atapci1 ata3: channel #1 on atapci1 acd0: CDRW <HL-DT-ST GCE-8160B/1.02> at ata0-master PIO4 ad4: 78167MB <Maxtor 6Y080M0/YAR51BW0> [158816/16/63] at ata2-master SATA150 ad6: 78167MB <Maxtor 6Y080M0/YAR51BW0> [158816/16/63] at ata3-master SATA150 NB if you recompile your kernel leave ATA_STATIC_ID in. Regards, Nigel. Mário Gamito wrote: > Hi, > > Searching in the hardware suported by 5.3 i see no (obvious) reference > to Intel ICH5 SATA disk controler. > > But googling for "intel ich5 freebsd", there are lots os links about > this issue. > Some talk about patches, even in this list, several months before 5.3 > > In the end, i do not know if this controler is or isn't suported > natively by FreeBSD 5.3, and if not, how can one make it work. > > Any help would be apreciated. > I have a server to re-install from Linux to FreeBSD tomorrow :( > > Warm Regards.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?41B65F8E.7010102>