Date: Tue, 18 Mar 2008 15:30:04 -0700 From: "Kurt Buff" <kurt.buff@gmail.com> To: alex@sangoma.com Cc: freebsd-net@freebsd.org Subject: Re: Sangoma A301? Message-ID: <a9f4a3860803181530i38db284dicaaa0abf08489ac9@mail.gmail.com> In-Reply-To: <47df62e8.3026360a.0e6e.582dSMTPIN_ADDED@mx.google.com> References: <a9f4a3860803171416n2d62661fia8464263f1e423ea@mail.gmail.com> <47df62e8.3026360a.0e6e.582dSMTPIN_ADDED@mx.google.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Alex, Your reminder about clear channel got me going. I think I've got this thing configured - the wancfg program isn't completely intuitive, but it's pretty good, and after banging around in it, I think I've got it configured. We're awaiting cable pull for the coax, about 200 ft from demarc to server room, and then circuit turn-up and addressing, etc., from the ISP. I've configured the card with some RFC1918 addresses so that I could complete the configuration. ifconfig reveals those addresses on the wag1 interface after reboot, and the messages on console indicate goodness too, so I think I'm good to go. The ISP says the protocol will be Cisco HDLC, so that's what I configured it with. I know I'll have more questions later, but for now this looks like success. Thanks, Kurt On Mon, Mar 17, 2008 at 11:36 PM, Alex Feldman <alex@sangoma.com> wrote: > Hi Kurt, > > We support DS3 card but only clear channel. We don't have fractional DS3 > support. > > Did u try to load this card? Does it recognize by kernel? > > If you have any questions, please feel free to contact me. > > Alex > Sangoma Technologies > > > > > -----Original Message----- > From: owner-freebsd-net@freebsd.org [mailto:owner-freebsd-net@freebsd.org] > On Behalf Of Kurt Buff > Sent: March 17, 2008 5:17 PM > To: freebsd-net@freebsd.org > Subject: Sangoma A301? > > I've just received mine, and am trying to get FreeBSD 6.3 Release to > recognize it. > > The application for this card is a fractional DS3 circuit that we're > getting installed soon, and the box will eventually manage multiple > links with BGP. > > I've been reading the docs from the Sangoma web site, and while they > talk about FreeBSD installation/diagnostics/configuration/etc., they > don't mention either the A301 or DS3 circuits. > > I've installed the wanpipe software (3.2.1), but am at this point lost > in the thickets of the sparse documentation. Before I send off a > message to their tech support, does anyone have words of wisdom for > me? > > > Thanks, > > Kurt > _______________________________________________ > freebsd-net@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-net > To unsubscribe, send any mail to "freebsd-net-unsubscribe@freebsd.org" > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?a9f4a3860803181530i38db284dicaaa0abf08489ac9>