Date: Mon, 13 Dec 1999 13:35:08 -0500 From: Kyle Patrick <kyle@alphaholdings.com> To: freebsd-bugs@freebsd.org Subject: natd/IPDIVERT problem Message-ID: <4.2.2.19991213133212.00a63100@mail.alphaholdings.com>
next in thread | raw e-mail | index | archive | help
I have just Found that ping -R outsideIP still causes a kernel panic just as mentioned in PR# 8596 and PR#11199 If you need any more info feel free to Reply to this address. --thanks for your time/attention .. Kyle Patrick My dmesg: Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.4-RC #1: Fri Dec 10 12:23:30 EST 1999 root@mail.nodarse.com:/usr/src/sys/compile/MAIL Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 398270145 Hz CPU: Pentium II/Xeon/Celeron (398.27-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x652 Stepping = 2 Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,M Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, CMOV,PAT,PSE36,MMX,FXSR> real memory = 268435456 (262144K bytes) avail memory = 258248704 (252196K bytes) Preloaded elf kernel "kernel" at 0xc02d9000. Pentium Pro MTRR support enabled Probing for devices on PCI bus 0: chip0: <Intel 82443GX host to PCI bridge> rev 0x00 on pci0.0.0 chip1: <Intel 82443GX host to AGP bridge> rev 0x00 on pci0.1.0 fxp0: <Intel EtherExpress Pro 10/100B Ethernet> rev 0x05 int a irq 11 on pci0.2.0 fxp0: Ethernet address 00:a0:c9:ac:5f:ae chip2: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.12.0 ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.12.1 chip3: <Intel 82371AB Power management controller> rev 0x02 on pci0.12.3 ahc0: <Adaptec 2940 Ultra2 SCSI adapter> rev 0x00 int a irq 11 on pci0.13.0 ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs vga0: <S3 868 graphics accelerator> rev 0x00 int a irq 11 on pci0.15.0 fxp1: <Intel EtherExpress Pro 10/100B Ethernet> rev 0x05 int a irq 9 on pci0.16.0 fxp1: Ethernet address 00:90:27:25:0c:89 Probing for devices on PCI bus 1: Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <16 virtual consoles, flags=0x0> ed0 not found at 0x280 atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa psm0 irq 12 on isa psm0: model IntelliMouse, device ID 3 sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): <WDC AC24300L> wd0: 4112MB (8421840 sectors), 8912 cyls, 15 heads, 63 S/T, 512 B/S wdc1 not found at 0x170 ppc0 at 0x378 irq 7 flags 0x40 on isa ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold lpt0: <generic printer> on ppbus 0 lpt0: Interrupt-driven port ppi0: <generic parallel i/o> on ppbus 0 plip0: <PLIP network interface> on ppbus 0 ep0 not found at 0x300 bt0 not found at 0x134 vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to accept, logging limited to 100 packets/entry by default Waiting 15 seconds for SCSI devices to settle sa0 at ahc0 bus 0 target 4 lun 0 sa0: <ARCHIVE Python 02779-XXX 6100> Removable Sequential Access SCSI-2 device sa0: 7.812MB/s transfers (7.812MHz, offset 15) changing root device to wd0s1a cd0 at ahc0 bus 0 target 2 lun 0 cd0: <PLEXTOR CD-ROM PX-32TS 1.02> Removable CD-ROM SCSI-2 device cd0: 20.000MB/s transfers (20.000MHz, offset 15) cd0: Attempt to query device size failed: NOT READY, Medium not present To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4.2.2.19991213133212.00a63100>