Date: Tue, 3 Nov 2009 16:29:31 +0800 From: Tim Chen <gphoto6@gmail.com> To: freebsd-stable@freebsd.org Subject: Increasing number of "requests for jumbo clusters denied" in netstat -m Message-ID: <1f51039c0911030029k7e25e3bcxea941ff542311d59@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
My machine is an IBM HS21 blade server and the NIC is bce.
bce1: <Broadcom NetXtreme II BCM5708 1000Base-SX (B2)> mem
0xd8000000-0xd9ffffff irq 19 at device 0.0 on pci6
miibus1: <MII bus> on bce1
bce1: Ethernet address: 00:1a:64:34:f2:fa
bce1: [ITHREAD]
bce1: ASIC (0x57081021); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); B/C
(0x03040405) ; Flags( MSI )
That machine is serving as a mail and web server. Recently I found that the
number of "requests for jumbo clusters denied" in netstat -m increases all
the time.
1031/3469/4500 mbufs in use (current/cache/total)
510/3326/3836/32768 mbuf clusters in use (current/cache/total/max)
510/2278 mbuf+clusters out of packet secondary zone in use (current/cache)
1/1453/1454/8704 4k (page size) jumbo clusters in use
(current/cache/total/max)
510/1086/1596/4352 9k jumbo clusters in use (current/cache/total/max)
0/0/0/2176 16k jumbo clusters in use (current/cache/total/max)
5871K/23105K/28977K bytes allocated to network (current/cache/total)
0/0/0 requests for mbufs denied (mbufs/clusters/mbuf+clusters)
0/4337166/0 requests for jumbo clusters denied (4k/9k/16k)
0/0/0 sfbufs in use (current/peak/max)
0 requests for sfbufs denied
0 requests for sfbufs delayed
0 requests for I/O initiated by sendfile
0 calls to protocol drain routines
ifconfig shows:
bce1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 9000
options=1bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,
TSO4>
ether 00:1a:64:34:f2:fa
inet 192.168.152.152 netmask 0xffffff00 broadcast 192.168.152.255
media: Ethernet autoselect (1000baseSX <full-duplex>)
status: active
And in rc.conf:
ifconfig_bce1="inet 192.168.152.152 netmask 255.255.255.0 mtu 9000"
Is the problem of increasing "requests for jumbo clusters denied" resulted
from my "mtu 9000" jumbo frame setting?
Will it be the problem of "bce" nic's driver or hardware?
Most of all, how will my system be efftected by that ""requests for jumbo
clusters denied" problem? Will it degrade
the performance or it is harmless?
Thanks for your help.
BR,
Tim Chen
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1f51039c0911030029k7e25e3bcxea941ff542311d59>