Date: Mon, 26 Oct 2009 09:55:15 -0400 From: Steve Polyack <korvus@comcast.net> To: Alexander Motin <mav@FreeBSD.org> Cc: freebsd-stable <freebsd-stable@FreeBSD.org>, freebsd-hardware@freebsd.org Subject: Re: FreeBSD and SATA Port Multipliers Message-ID: <4AE5AA43.7030405@comcast.net> In-Reply-To: <4AE099D8.5060103@FreeBSD.org> References: <4AE04F73.1050703@comcast.net> <4AE073CF.40500@comcast.net> <4AE099D8.5060103@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. --------------070703010804050102070907 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Alexander Motin wrote: > Steve Polyack wrote: > >> Alexander Motin wrote: >> >>> You can try this patch against today's HEAD: >>> http://people.freebsd.org/~mav/cam-ata.20091022.patch >>> >>> >> I tried the patch this morning against a fresh checkout of HEAD. >> Immediately after boot only one device per PM was detected (I have two >> hooked up at the moment, 5 drives on one, 1 on the other). However, >> about two minutes later all of the drives showed up! >> >> camcontrol also rescans the entire bus *very* quickly now, and discovers >> all changes (new/missing disks and port multipliers). >> >> Here's some verbose info from /var/log/messages immediately after boot: >> Oct 22 10:52:03 lovepod kernel: siisch0: Timeout on slot 27 >> Oct 22 10:52:03 lovepod kernel: siisch0: siis_timeout is 00000000 ss >> 08000000 rs 08000000 es 00000000 sts 801b2000 serr 00000000 >> Oct 22 10:52:03 lovepod kernel: siisch0: ready wait time=1ms >> Oct 22 10:52:03 lovepod kernel: siisch0: ready wait time=1ms >> Oct 22 10:52:03 lovepod kernel: siisch0: SIIS reset... >> Oct 22 10:52:03 lovepod kernel: siisch0: ready wait time=1ms >> Oct 22 10:52:03 lovepod kernel: siisch0: hardware reset ... >> Oct 22 10:52:03 lovepod kernel: siisch0: SATA connect timeout >> status=00000001 >> Oct 22 10:52:03 lovepod kernel: siisch0: SIIS reset done: phy reset >> found no device >> Oct 22 10:52:03 lovepod kernel: (aprobe0:siisch0:0:1:0): Command timed out >> Oct 22 10:52:03 lovepod kernel: (aprobe0:siisch0:0:1:0): error 5 >> Oct 22 10:52:03 lovepod kernel: (aprobe0:siisch0:0:1:0): Retries Exhausted >> Oct 22 10:52:03 lovepod kernel: siisch0: DISCONNECT requested >> > > What was before that? Can you send me full verbose boot messages? > > Here's a full dmesg from today using the 10/22/2009 head and patch. It actually failed to detect all but one of 6 drives this time. I'm about to try today's head and patch. I'll let you know how it goes. --------------070703010804050102070907 Content-Type: text/plain; name="dmesg.20091022patch" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg.20091022patch" Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.0-CURRENT #2: Thu Oct 22 10:34:44 EDT 2009 Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff809e7000. Preloaded /boot/zfs/zpool.cache "/boot/zfs/zpool.cache" at 0xffffffff809e7260. Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2133421704 Hz CPU: Intel(R) Xeon(R) CPU E5506 @ 2.13GHz (2133.42-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x106a5 Stepping = 5 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x9ce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant real memory = 4299161600 (4100 MB) Physical memory chunk(s): 0x0000000000001000 - 0x0000000000093fff, 602112 bytes (147 pages) 0x0000000000a16000 - 0x00000000b60fffff, 3043926016 bytes (743146 pages) 0x00000000bf78e000 - 0x00000000bf78ffff, 8192 bytes (2 pages) 0x0000000100000000 - 0x000000013ffeffff, 1073676288 bytes (262128 pages) avail memory = 4095377408 (3905 MB) ACPI APIC Table: <061909 APIC1420> INTR: Adding local APIC 18 as a target INTR: Adding local APIC 20 as a target INTR: Adding local APIC 22 as a target FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) cpu0 (BSP): APIC ID: 16 cpu1 (AP): APIC ID: 18 cpu2 (AP): APIC ID: 20 cpu3 (AP): APIC ID: 22 APIC: CPU 0 has ACPI ID 1 APIC: CPU 1 has ACPI ID 2 APIC: CPU 2 has ACPI ID 3 APIC: CPU 3 has ACPI ID 4 ULE: setup cpu 0 ULE: setup cpu 1 ULE: setup cpu 2 ULE: setup cpu 3 ACPI: RSDP 0xfa710 00024 (v2 ACPIAM) ACPI: XSDT 0xbf790100 0008C (v1 NEC 20090619 MSFT 00000097) ACPI: FACP 0xbf790290 000F4 (v4 061909 FACP1420 20090619 MSFT 00000097) ACPI: DSDT 0xbf790670 05B8F (v2 10006 10006000 00000000 INTL 20051117) ACPI: FACS 0xbf79e000 00040 ACPI: APIC 0xbf790390 000D2 (v2 061909 APIC1420 20090619 MSFT 00000097) ACPI: MCFG 0xbf790470 0003C (v1 061909 OEMMCFG 20090619 MSFT 00000097) ACPI: SLIC 0xbf7904b0 00176 (v1 NEC 20090619 MSFT 00000097) ACPI: ERST 0xbf790630 00040 (v1 061909 WHEA1420 20090619 MSFT 00000097) ACPI: OEMB 0xbf79e040 0007B (v1 061909 OEMB1420 20090619 MSFT 00000097) ACPI: HPET 0xbf79a670 00038 (v1 061909 OEMHPET 20090619 MSFT 00000097) ACPI: DMAR 0xbf79e0c0 00120 (v1 AMI OEMDMAR 00000001 MSFT 00000097) ACPI: SSDT 0xbf79efb0 00363 (v1 DpgPmm CpuPm 00000012 INTL 20051117) ACPI: EINJ 0xbf79a6b0 00130 (v1 AMIER AMI_EINJ 20090619 MSFT 00000097) ACPI: BERT 0xbf79a840 00030 (v1 AMIER AMI_BERT 20090619 MSFT 00000097) ACPI: ERST 0xbf79a870 001B0 (v1 AMIER AMI_ERST 20090619 MSFT 00000097) ACPI: HEST 0xbf79aa20 000A8 (v1 AMIER AMI_HEST 20090619 MSFT 00000097) MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 1 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level lapic: Routing NMI -> LINT1 lapic: LINT1 trigger: edge lapic: LINT1 polarity: high ioapic0 <Version 2.0> irqs 0-23 on motherboard cpu0 BSP: ID: 0x10000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00010400 nfslock: pseudo-device kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> null: <null device, zero device> io: <I/O> random: <entropy source, Software, Yarrow> acpi0: <NEC > on motherboard PCIe: Memory Mapped configuration base @ 0xe0000000 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 16 vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] ACPI: Executed 1 blocks of module-level executable AML code acpi0: Power Button (fixed) AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.IELK.RXA0 -> bus 0 dev 0 func 0 AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.PIX0 -> bus 0 dev 31 func 0 ACPI timer: 1/2 1/2 1/1 1/0 1/0 1/2 1/0 1/0 1/1 1/0 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 6 7 10 11 12 14 15 Validation 0 10 N 0 3 4 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 6 7 10 11 12 14 15 Validation 0 11 N 0 3 4 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 15 N 0 3 4 6 7 10 11 12 14 15 Validation 0 15 N 0 3 4 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 14 N 0 3 4 6 7 10 11 12 14 15 Validation 0 14 N 0 3 4 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 6 7 10 11 12 14 15 Validation 0 255 N 0 3 4 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 7 N 0 3 4 6 7 10 11 12 14 15 Validation 0 7 N 0 3 4 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 6 N 0 3 4 6 7 10 11 12 14 15 Validation 0 6 N 0 3 4 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 6 7 10 11 12 14 15 Validation 0 10 N 0 3 4 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 acpi_hpet0: vend: 0x8086 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route 64-bit Timecounter "HPET" frequency 14318180 Hz quality 900 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff iomem 0xfed40000-0xfed44fff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0x3403, revid=0x13 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D0 MSI supports 2 messages, vector masks found-> vendor=0x8086, dev=0x3408, revid=0x13 domain=0, bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0104, statreg=0x0010, cachelnsz=64 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D0 MSI supports 2 messages, vector masks found-> vendor=0x8086, dev=0x340a, revid=0x13 domain=0, bus=0, slot=3, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0104, statreg=0x0010, cachelnsz=64 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D0 MSI supports 2 messages, vector masks found-> vendor=0x8086, dev=0x340e, revid=0x13 domain=0, bus=0, slot=7, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=64 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D0 MSI supports 2 messages, vector masks found-> vendor=0x8086, dev=0x3410, revid=0x13 domain=0, bus=0, slot=9, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0104, statreg=0x0010, cachelnsz=64 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D0 MSI supports 2 messages, vector masks found-> vendor=0x8086, dev=0x342e, revid=0x13 domain=0, bus=0, slot=20, func=0 class=08-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=64 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3422, revid=0x13 domain=0, bus=0, slot=20, func=1 class=08-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=64 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3423, revid=0x13 domain=0, bus=0, slot=20, func=2 class=08-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=64 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3438, revid=0x13 domain=0, bus=0, slot=20, func=3 class=08-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=64 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3430, revid=0x13 domain=0, bus=0, slot=22, func=0 class=08-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 3 supports D0 D3 current D0 MSI-X supports 1 message in map 0x10 map[10]: type Memory, range 64, base 0xfacfc000, size 14, enabled pcib0: matched entry for 0.22.INTA pcib0: slot 22 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x3431, revid=0x13 domain=0, bus=0, slot=22, func=1 class=08-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 3 supports D0 D3 current D0 MSI-X supports 1 message in map 0x10 map[10]: type Memory, range 64, base 0xfacf8000, size 14, enabled pcib0: matched entry for 0.22.INTB pcib0: slot 22 INTB hardwired to IRQ 17 found-> vendor=0x8086, dev=0x3432, revid=0x13 domain=0, bus=0, slot=22, func=2 class=08-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=15 powerspec 3 supports D0 D3 current D0 MSI-X supports 1 message in map 0x10 map[10]: type Memory, range 64, base 0xfacf4000, size 14, enabled pcib0: matched entry for 0.22.INTC pcib0: slot 22 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x3433, revid=0x13 domain=0, bus=0, slot=22, func=3 class=08-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=14 powerspec 3 supports D0 D3 current D0 MSI-X supports 1 message in map 0x10 map[10]: type Memory, range 64, base 0xfacf0000, size 14, enabled pcib0: matched entry for 0.22.INTD pcib0: slot 22 INTD hardwired to IRQ 19 found-> vendor=0x8086, dev=0x3429, revid=0x13 domain=0, bus=0, slot=22, func=4 class=08-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 3 supports D0 D3 current D0 MSI-X supports 1 message in map 0x10 map[10]: type Memory, range 64, base 0xfacec000, size 14, enabled pcib0: matched entry for 0.22.INTA pcib0: slot 22 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x342a, revid=0x13 domain=0, bus=0, slot=22, func=5 class=08-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 3 supports D0 D3 current D0 MSI-X supports 1 message in map 0x10 map[10]: type Memory, range 64, base 0xface8000, size 14, enabled pcib0: matched entry for 0.22.INTB pcib0: slot 22 INTB hardwired to IRQ 17 found-> vendor=0x8086, dev=0x342b, revid=0x13 domain=0, bus=0, slot=22, func=6 class=08-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=15 powerspec 3 supports D0 D3 current D0 MSI-X supports 1 message in map 0x10 map[10]: type Memory, range 64, base 0xface4000, size 14, enabled pcib0: matched entry for 0.22.INTC pcib0: slot 22 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x342c, revid=0x13 domain=0, bus=0, slot=22, func=7 class=08-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=14 powerspec 3 supports D0 D3 current D0 MSI-X supports 1 message in map 0x10 map[10]: type Memory, range 64, base 0xface0000, size 14, enabled pcib0: matched entry for 0.22.INTD pcib0: slot 22 INTD hardwired to IRQ 19 found-> vendor=0x8086, dev=0x3a37, revid=0x00 domain=0, bus=0, slot=26, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[20]: type I/O Port, range 32, base 0xbc00, size 5, enabled pcib0: matched entry for 0.26.INTA pcib0: slot 26 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x3a38, revid=0x00 domain=0, bus=0, slot=26, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=7 map[20]: type I/O Port, range 32, base 0xb880, size 5, enabled pcib0: matched entry for 0.26.INTB pcib0: slot 26 INTB hardwired to IRQ 21 found-> vendor=0x8086, dev=0x3a39, revid=0x00 domain=0, bus=0, slot=26, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=14 map[20]: type I/O Port, range 32, base 0xb800, size 5, enabled pcib0: matched entry for 0.26.INTD pcib0: slot 26 INTD hardwired to IRQ 19 found-> vendor=0x8086, dev=0x3a3c, revid=0x00 domain=0, bus=0, slot=26, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=15 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xfacde000, size 10, enabled pcib0: matched entry for 0.26.INTC pcib0: slot 26 INTC hardwired to IRQ 18 unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfacde000 found-> vendor=0x8086, dev=0x3a3e, revid=0x00 domain=0, bus=0, slot=27, func=0 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=6 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xfacd8000, size 14, enabled pcib0: matched entry for 0.27.INTA pcib0: slot 27 INTA hardwired to IRQ 22 found-> vendor=0x8086, dev=0x3a40, revid=0x00 domain=0, bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0104, statreg=0x0010, cachelnsz=64 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 17 found-> vendor=0x8086, dev=0x3a48, revid=0x00 domain=0, bus=0, slot=28, func=4 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=64 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 17 found-> vendor=0x8086, dev=0x3a4a, revid=0x00 domain=0, bus=0, slot=28, func=5 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=64 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTB pcib0: slot 28 INTB hardwired to IRQ 16 found-> vendor=0x8086, dev=0x3a34, revid=0x00 domain=0, bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[20]: type I/O Port, range 32, base 0xb480, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 found-> vendor=0x8086, dev=0x3a35, revid=0x00 domain=0, bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=14 map[20]: type I/O Port, range 32, base 0xb400, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 19 found-> vendor=0x8086, dev=0x3a36, revid=0x00 domain=0, bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=15 map[20]: type I/O Port, range 32, base 0xb080, size 5, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x3a3a, revid=0x00 domain=0, bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xfacdc000, size 10, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfacdc000 found-> vendor=0x8086, dev=0x244e, revid=0x90 domain=0, bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3a16, revid=0x00 domain=0, bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3a22, revid=0x00 domain=0, bus=0, slot=31, func=2 class=01-06-01, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=14 powerspec 3 supports D0 D3 current D0 MSI supports 16 messages map[10]: type I/O Port, range 32, base 0xb000, size 3, enabled map[14]: type I/O Port, range 32, base 0xac00, size 2, enabled map[18]: type I/O Port, range 32, base 0xa880, size 3, enabled map[1c]: type I/O Port, range 32, base 0xa800, size 2, enabled map[20]: type I/O Port, range 32, base 0xa480, size 5, enabled map[24]: type Memory, range 32, base 0xfacd2000, size 11, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 19 found-> vendor=0x8086, dev=0x3a30, revid=0x00 domain=0, bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=15 map[10]: type Memory, range 64, base 0xfacd0000, size 8, enabled map[20]: type I/O Port, range 32, base 0x400, size 5, enabled pcib0: matched entry for 0.31.INTC pcib0: slot 31 INTC hardwired to IRQ 18 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x0-0x0 pcib1: no prefetched decode pci1: <ACPI PCI bus> on pcib1 pci1: domain=0, physical bus=1 pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0x0-0x0 pcib2: no prefetched decode pci2: <ACPI PCI bus> on pcib2 pci2: domain=0, physical bus=2 pcib3: <ACPI PCI-PCI bridge> at device 7.0 on pci0 pcib3: domain 0 pcib3: secondary bus 3 pcib3: subordinate bus 4 pcib3: I/O decode 0xc000-0xcfff pcib3: memory decode 0xfad00000-0xfadfffff pcib3: no prefetched decode pci3: <ACPI PCI bus> on pcib3 pci3: domain=0, physical bus=3 found-> vendor=0x12d8, dev=0xe111, revid=0x02 domain=0, bus=3, slot=0, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0010, cachelnsz=64 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit pcib3: matched entry for 3.0.INTA pcib3: slot 0 INTA hardwired to IRQ 16 pcib4: <PCI-PCI bridge> irq 16 at device 0.0 on pci3 pcib4: domain 0 pcib4: secondary bus 4 pcib4: subordinate bus 4 pcib4: I/O decode 0xc000-0xcfff pcib4: memory decode 0xfad00000-0xfadfffff pcib4: no prefetched decode pci4: <PCI bus> on pcib4 pci4: domain=0, physical bus=4 found-> vendor=0x1095, dev=0x3124, revid=0x01 domain=0, bus=4, slot=4, func=0 class=01-04-00, hdrtype=0x00, mfdev=0 cmdreg=0x01df, statreg=0x02b0, cachelnsz=64 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xfadfe000, size 7, enabled pcib4: requested memory range 0xfadfe000-0xfadfe07f: good pcib3: requested memory range 0xfadfe000-0xfadfe07f: good map[18]: type Memory, range 64, base 0xfadf0000, size 15, enabled pcib4: requested memory range 0xfadf0000-0xfadf7fff: good pcib3: requested memory range 0xfadf0000-0xfadf7fff: good map[20]: type I/O Port, range 32, base 0xcc00, size 4, enabled pcib4: requested I/O range 0xcc00-0xcc0f: in range pcib3: requested I/O range 0xcc00-0xcc0f: in range pcib3: matched entry for 3.0.INTA pcib3: slot 0 INTA hardwired to IRQ 16 pcib4: slot 4 INTA is routed to irq 16 siis0: <SiI3124 SATA2 controller> port 0xcc00-0xcc0f mem 0xfadfe000-0xfadfe07f,0xfadf0000-0xfadf7fff irq 16 at device 4.0 on pci4 siis0: Reserved 0x80 bytes for rid 0x10 type 3 at 0xfadfe000 siis0: Reserved 0x8000 bytes for rid 0x18 type 3 at 0xfadf0000 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 16 vector 49 siis0: [MPSAFE] siis0: [ITHREAD] siisch0: <SIIS channel> at channel 0 on siis0 siisch0: [MPSAFE] siisch0: [ITHREAD] siisch1: <SIIS channel> at channel 1 on siis0 siisch1: [MPSAFE] siisch1: [ITHREAD] siisch2: <SIIS channel> at channel 2 on siis0 siisch2: [MPSAFE] siisch2: [ITHREAD] siisch3: <SIIS channel> at channel 3 on siis0 siisch3: [MPSAFE] siisch3: [ITHREAD] pcib5: <ACPI PCI-PCI bridge> at device 9.0 on pci0 pcib5: domain 0 pcib5: secondary bus 5 pcib5: subordinate bus 5 pcib5: I/O decode 0x0-0x0 pcib5: no prefetched decode pci5: <ACPI PCI bus> on pcib5 pci5: domain=0, physical bus=5 pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached) pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached) pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached) pci0: <base peripheral, interrupt controller> at device 20.3 (no driver attached) pci0: <base peripheral> at device 22.0 (no driver attached) pci0: <base peripheral> at device 22.1 (no driver attached) pci0: <base peripheral> at device 22.2 (no driver attached) pci0: <base peripheral> at device 22.3 (no driver attached) pci0: <base peripheral> at device 22.4 (no driver attached) pci0: <base peripheral> at device 22.5 (no driver attached) pci0: <base peripheral> at device 22.6 (no driver attached) pci0: <base peripheral> at device 22.7 (no driver attached) uhci0: <UHCI (generic) USB controller> port 0xbc00-0xbc1f irq 16 at device 26.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbc00 uhci0: [MPSAFE] uhci0: [ITHREAD] uhci0: LegSup = 0x2f00 usbus0: <UHCI (generic) USB controller> on uhci0 uhci1: <UHCI (generic) USB controller> port 0xb880-0xb89f irq 21 at device 26.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb880 ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 16 vector 50 uhci1: [MPSAFE] uhci1: [ITHREAD] uhci1: LegSup = 0x2f00 usbus1: <UHCI (generic) USB controller> on uhci1 uhci2: <UHCI (generic) USB controller> port 0xb800-0xb81f irq 19 at device 26.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb800 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 16 vector 51 uhci2: [MPSAFE] uhci2: [ITHREAD] uhci2: LegSup = 0x2f00 usbus2: <UHCI (generic) USB controller> on uhci2 ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfacde000-0xfacde3ff irq 18 at device 26.7 on pci0 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 16 vector 52 ehci0: [MPSAFE] ehci0: [ITHREAD] usbus3: EHCI version 1.0 usbus3: <EHCI (generic) USB 2.0 controller> on ehci0 pci0: <multimedia, HDA> at device 27.0 (no driver attached) pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pcib6: domain 0 pcib6: secondary bus 6 pcib6: subordinate bus 6 pcib6: I/O decode 0x0-0x0 pcib6: no prefetched decode pci6: <ACPI PCI bus> on pcib6 pci6: domain=0, physical bus=6 pcib7: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 pcib7: domain 0 pcib7: secondary bus 7 pcib7: subordinate bus 7 pcib7: I/O decode 0xd000-0xdfff pcib7: memory decode 0xfae00000-0xfaefffff pcib7: no prefetched decode pci7: <ACPI PCI bus> on pcib7 pci7: domain=0, physical bus=7 found-> vendor=0x8086, dev=0x10d3, revid=0x00 domain=0, bus=7, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=64 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit MSI-X supports 5 messages in map 0x1c map[10]: type Memory, range 32, base 0xfaee0000, size 17, enabled pcib7: requested memory range 0xfaee0000-0xfaefffff: good map[18]: type I/O Port, range 32, base 0xdc00, size 5, enabled pcib7: requested I/O range 0xdc00-0xdc1f: in range map[1c]: type Memory, range 32, base 0xfaedc000, size 14, enabled pcib7: requested memory range 0xfaedc000-0xfaedffff: good pcib7: matched entry for 7.0.INTA pcib7: slot 0 INTA hardwired to IRQ 16 em0: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0xdc00-0xdc1f mem 0xfaee0000-0xfaefffff,0xfaedc000-0xfaedffff irq 16 at device 0.0 on pci7 em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfaee0000 em0: Reserved 0x4000 bytes for rid 0x1c type 3 at 0xfaedc000 em0: attempting to allocate 3 MSI-X vectors (5 supported) msi: routing MSI-X IRQ 256 to local APIC 16 vector 53 msi: routing MSI-X IRQ 257 to local APIC 16 vector 54 msi: routing MSI-X IRQ 258 to local APIC 16 vector 55 em0: using IRQs 256-258 for MSI-X em0: Using MSIX interrupts em0: [MPSAFE] em0: [ITHREAD] em0: [MPSAFE] em0: [ITHREAD] em0: [MPSAFE] em0: [ITHREAD] em0: bpf attached em0: Ethernet address: 00:30:48:db:7d:9e pcib8: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0 pcib8: domain 0 pcib8: secondary bus 8 pcib8: subordinate bus 8 pcib8: I/O decode 0xe000-0xefff pcib8: memory decode 0xfaf00000-0xfaffffff pcib8: no prefetched decode pci8: <ACPI PCI bus> on pcib8 pci8: domain=0, physical bus=8 found-> vendor=0x8086, dev=0x10d3, revid=0x00 domain=0, bus=8, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=64 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit MSI-X supports 5 messages in map 0x1c map[10]: type Memory, range 32, base 0xfafe0000, size 17, enabled pcib8: requested memory range 0xfafe0000-0xfaffffff: good map[18]: type I/O Port, range 32, base 0xec00, size 5, enabled pcib8: requested I/O range 0xec00-0xec1f: in range map[1c]: type Memory, range 32, base 0xfafdc000, size 14, enabled pcib8: requested memory range 0xfafdc000-0xfafdffff: good pcib8: matched entry for 8.0.INTA pcib8: slot 0 INTA hardwired to IRQ 17 em1: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0xec00-0xec1f mem 0xfafe0000-0xfaffffff,0xfafdc000-0xfafdffff irq 17 at device 0.0 on pci8 em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfafe0000 em1: Reserved 0x4000 bytes for rid 0x1c type 3 at 0xfafdc000 em1: attempting to allocate 3 MSI-X vectors (5 supported) msi: routing MSI-X IRQ 259 to local APIC 16 vector 56 msi: routing MSI-X IRQ 260 to local APIC 16 vector 57 msi: routing MSI-X IRQ 261 to local APIC 16 vector 58 em1: using IRQs 259-261 for MSI-X em1: Using MSIX interrupts em1: [MPSAFE] em1: [ITHREAD] em1: [MPSAFE] em1: [ITHREAD] em1: [MPSAFE] em1: [ITHREAD] em1: bpf attached em1: Ethernet address: 00:30:48:db:7d:9f uhci3: <UHCI (generic) USB controller> port 0xb480-0xb49f irq 23 at device 29.0 on pci0 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb480 ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 16 vector 59 uhci3: [MPSAFE] uhci3: [ITHREAD] uhci3: LegSup = 0x3f00 usbus4: <UHCI (generic) USB controller> on uhci3 uhci4: <UHCI (generic) USB controller> port 0xb400-0xb41f irq 19 at device 29.1 on pci0 uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb400 uhci4: [MPSAFE] uhci4: [ITHREAD] uhci4: LegSup = 0x2f00 usbus5: <UHCI (generic) USB controller> on uhci4 uhci5: <UHCI (generic) USB controller> port 0xb080-0xb09f irq 18 at device 29.2 on pci0 uhci5: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb080 uhci5: [MPSAFE] uhci5: [ITHREAD] uhci5: LegSup = 0x2f00 usbus6: <UHCI (generic) USB controller> on uhci5 ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfacdc000-0xfacdc3ff irq 23 at device 29.7 on pci0 ehci1: [MPSAFE] ehci1: [ITHREAD] usbus7: EHCI version 1.0 usbus7: <EHCI (generic) USB 2.0 controller> on ehci1 pcib9: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib9: domain 0 pcib9: secondary bus 9 pcib9: subordinate bus 9 pcib9: I/O decode 0xf000-0xfff pcib9: memory decode 0xfb000000-0xfbefffff pcib9: prefetched decode 0xf9000000-0xf9ffffff pcib9: Subtractively decoded bridge. pci9: <ACPI PCI bus> on pcib9 pci9: domain=0, physical bus=9 found-> vendor=0x102b, dev=0x0532, revid=0x0a domain=0, bus=9, slot=1, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=64 (dwords) lattimer=0x40 (1920 ns), mingnt=0x10 (4000 ns), maxlat=0x20 (8000 ns) intpin=a, irq=15 powerspec 1 supports D0 D3 current D0 map[10]: type Prefetchable Memory, range 32, base 0xf9000000, size 24, enabled pcib9: requested memory range 0xf9000000-0xf9ffffff: good map[14]: type Memory, range 32, base 0xfbefc000, size 14, enabled pcib9: requested memory range 0xfbefc000-0xfbefffff: good map[18]: type Memory, range 32, base 0xfb000000, size 23, enabled pcib9: requested memory range 0xfb000000-0xfb7fffff: good pcib9: matched entry for 9.1.INTA pcib9: slot 1 INTA hardwired to IRQ 18 vgapci0: <VGA-compatible display> mem 0xf9000000-0xf9ffffff,0xfbefc000-0xfbefffff,0xfb000000-0xfb7fffff irq 18 at device 1.0 on pci9 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <AHCI controller> port 0xb000-0xb007,0xac00-0xac03,0xa880-0xa887,0xa800-0xa803,0xa480-0xa49f mem 0xfacd2000-0xfacd27ff irq 19 at device 31.2 on pci0 ahci0: Reserved 0x800 bytes for rid 0x24 type 3 at 0xfacd2000 ahci0: attempting to allocate 1 MSI vectors (16 supported) msi: routing MSI IRQ 262 to local APIC 16 vector 64 ahci0: using IRQ 262 for MSI ahci0: [MPSAFE] ahci0: [ITHREAD] ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier not supported ahci0: Caps: 64bit NCQ SNTF SS ALP AL CLO 3Gbps PMD SSC PSC 32cmd CCC EM eSATA 6ports ahci0: Caps2: ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich0: [MPSAFE] ahcich0: [ITHREAD] ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich1: [MPSAFE] ahcich1: [ITHREAD] ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich2: [MPSAFE] ahcich2: [ITHREAD] ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich3: [MPSAFE] ahcich3: [ITHREAD] ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich4: [MPSAFE] ahcich4: [ITHREAD] ahcich5: <AHCI channel> at channel 5 on ahci0 ahcich5: [MPSAFE] ahcich5: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_button0: <Power Button> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock (resolution 1000000us) atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) Calling int 0x15 (ax=0xc000 bx=0x0000 cx=0x0000 dx=0x0000 es=0x0000 di=0x0000) Exiting int 0x15 (ax=0x0000 bx=0xe712 cx=0x0000 dx=0x0000 es=0xf000 di=0x0000) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 16 vector 60 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: unable to allocate IRQ uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 16 vector 61 uart0: [FILTER] uart0: fast interrupt uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 16 vector 62 uart1: [FILTER] uart1: fast interrupt cpu0: <ACPI CPU> on acpi0 ACPI Warning: Incorrect checksum in table [OEMB] - 6E, should be 6B (20091013/tbutils-354) ACPI: SSDT 0xbf79e1e0 008F0 (v1 DpgPmm P001Ist 00000011 INTL 20051117) ACPI: SSDT 0xbf79ead0 004D5 (v1 PmRef P001Cst 00003001 INTL 20051117) est0: <Enhanced SpeedStep Frequency Control> on cpu0 est0: Invalid id16 (set, cur) = (15, 16) est0: Invalid freq 2000, ignored. est0: Invalid id16 (set, cur) = (14, 16) est0: Invalid freq 1867, ignored. est0: Invalid id16 (set, cur) = (13, 16) est0: Invalid freq 1733, ignored. est0: Invalid id16 (set, cur) = (12, 16) est0: Invalid freq 1600, ignored. p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est1: Invalid id16 (set, cur) = (15, 16) est1: Invalid freq 2000, ignored. est1: Invalid id16 (set, cur) = (14, 16) est1: Invalid freq 1867, ignored. est1: Invalid id16 (set, cur) = (13, 16) est1: Invalid freq 1733, ignored. est1: Invalid id16 (set, cur) = (12, 16) est1: Invalid freq 1600, ignored. p4tcc1: <CPU Frequency Thermal Control> on cpu1 cpu2: <ACPI CPU> on acpi0 est2: <Enhanced SpeedStep Frequency Control> on cpu2 est2: Invalid id16 (set, cur) = (15, 16) est2: Invalid freq 2000, ignored. est2: Invalid id16 (set, cur) = (14, 16) est2: Invalid freq 1867, ignored. est2: Invalid id16 (set, cur) = (13, 16) est2: Invalid freq 1733, ignored. est2: Invalid id16 (set, cur) = (12, 16) est2: Invalid freq 1600, ignored. p4tcc2: <CPU Frequency Thermal Control> on cpu2 cpu3: <ACPI CPU> on acpi0 est3: <Enhanced SpeedStep Frequency Control> on cpu3 est3: Invalid id16 (set, cur) = (15, 16) est3: Invalid freq 2000, ignored. est3: Invalid id16 (set, cur) = (14, 16) est3: Invalid freq 1867, ignored. est3: Invalid id16 (set, cur) = (13, 16) est3: Invalid freq 1733, ignored. est3: Invalid id16 (set, cur) = (12, 16) est3: Invalid freq 1600, ignored. p4tcc3: <CPU Frequency Thermal Control> on cpu3 acpi0: wakeup code va 0xffffff8077774000 pa 0x4000 isa_probe_children: disabling PnP devices ipmi0: <IPMI System Interface> on isa0 ipmi0: KCS mode found at io 0xca2 alignment 0x1 on isa atkbdc: atkbdc0 already exists; skipping it atrtc: atrtc0 already exists; skipping it sc: sc0 already exists; skipping it uart: uart0 already exists; skipping it uart: uart1 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 ppc0 failed to probe at irq 7 on isa0 isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 257519 -> 100000 procfs registered lapic: Divisor 2, Frequency 66669427 hz Timecounter "TSC" frequency 2133421704 Hz quality -100 Timecounters tick every 1.000 msec lo0: bpf attachedsiisch0: CONNECT requested siisch0: SIIS reset... siisch0: ready wait time=1ms siisch0: hardware reset ... siisch0: SATA connect time=0ms status=00000123 siisch0: ready wait time=0ms siisch0: SIIS reset done: devices=00000001 siisch2: CONNECT requested siisch2: SIIS reset... siisch2: ready wait time=1ms siisch2: hardware reset ... siisch2: SATA connect time=0ms status=00000123 siisch2: ready wait time=0ms siisch2: SIIS reset done: devices=00000001 Waiting 15 seconds for SCSI devices to settle siisch0: SIIS reset... siisch0: ready wait time=1ms siisch0: hardware reset ... siisch0: SATA connect time=0ms status=00000123 siisch0: ready wait time=0ms siisch0: SIIS reset done: devices=00000001 siisch1: SIIS reset... siisch1: ready wait time=1ms siisch1: hardware reset ... siisch1: SATA connect timeout status=00000000 siisch1: SIIS reset done: phy reset found no device siisch2: SIIS reset... siisch2: ready wait time=1ms siisch2: hardware reset ... siisch2: SATA connect time=0ms status=00000123 siisch2: ready wait time=0ms siisch2: SIIS reset done: devices=00000001 siisch3: SIIS reset... siisch3: ready wait time=1ms siisch3: hardware reset ... siisch3: SATA connect timeout status=00000000 siisch3: SIIS reset done: phy reset found no device ahcich0: AHCI reset... ahcich0: hardware reset ... ahcich0: SATA connect timeout status=00000000 ahcich0: AHCI reset done: phy reset found no device ahcich1: AHCI reset... ahcich1: hardware reset ... ahcich1: SATA connect time=0ms status=00000123 ahcich1: ready wait time=4ms ahcich1: AHCI reset done: device found ahcich2: AHCI reset... ahcich2: hardware reset ... ahcich2: SATA connect timeout status=00000000 ahcich2: AHCI reset done: phy reset found no device ahcich3: AHCI reset... ahcich3: hardware reset ... ahcich3: SATA connect timeout status=00000000 ahcich3: AHCI reset done: phy reset found no device ahcich4: AHCI reset... ahcich4: hardware reset ... ahcich4: SATA connect timeout status=00000000 ahcich4: AHCI reset done: phy reset found no device ahcich5: AHCI reset... ahcich5: hardware reset ... ahcich5: SATA connect timeout status=00000000 ahcich5: AHCI reset done: phy reset found no device usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 12Mbps Full Speed USB v1.0 usbus7: 480Mbps High Speed USB v2.0 ipmi0: IPMI device rev. 1, firmware rev. 1.2, version 2.0 ipmi0: Number of channels 0 ipmi0: Attached watchdog ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 ugen4.1: <Intel> at usbus4 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen5.1: <Intel> at usbus5 uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 ugen6.1: <Intel> at usbus6 uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 ugen7.1: <Intel> at usbus7 uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered uhub6: 2 ports with 2 removable, self powered uhub3: 6 ports with 6 removable, self powered uhub7: 6 ports with 6 removable, self powered ugen1.2: <Winbond Electronics Corp> at usbus1 ums0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 2> on usbus1 ums0: 3 buttons and [XYZ] coordinates ID=0 ukbd0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 2> on usbus1 kbd2 at ukbd0 kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000 (aprobe0:siisch0:0:15:0): SIGNATURE: 9669 PM Product ID: 37261095 PM Revision: 00001706 (aprobe2:siisch2:0:15:0): SIGNATURE: 9669 PM Product ID: 37261095 PM Revision: 00001706 (aprobe5:ahcich1:0:0:0): SIGNATURE: 0000 pmp0 at siisch0 bus 0 scbus0 target 15 lun 0 pmp0: <Port Multiplier 37261095 1706> ATA/ATAPI-0 device pmp0: 300.000MB/s transfers PM ports: 5 PM RESET 0 PM RESET 1 PM RESET 2 siisch0: SNTF 0x0000 siisch0: SNTF 0x0000 PM RESET 3 PM RESET 4 siisch0: SNTF 0x0000 siisch0: SNTF 0x0000 PM reset done pmp1 at siisch2 bus 0 scbus2 target 15 lun 0 pmp1: <Port Multiplier 37261095 1706> ATA/ATAPI-0PM connect done devicePM status: 0 - 00000123 pmp1: 300.000MB/s transfersPM status: 1 - 00000123 PM status: 2 - 00000123 PM status: 3 - 00000123 PM ports: 5 PM status: 4 - 00000123 PM RESET 0 PM RESET 1 PM RESET 2 PM RESET 3 PM RESET 4 PM reset done ada0 at PM connect done GEOM: new disk ada0PM status: 0 - 00000123 ahcich1 bus 0 scbus5 target 0 lun 0 ada0: <ST3320418AS CC35> ATA/ATAPI-8 SATA 2.x device ada0: Serial Number 9VM1RYE5 ada0: 300.000MB/s transfers ada0: 305245MB (625142448 512 byte sectors: 16H 63S/T 16383C) ada0: Native Command Queueing enabled pass0 at siisch0 bus 0 scbus0 target 15 lun 0 pass0: <Port Multiplier 37261095 1706> ATA/ATAPI-0 device pass0: 30GEOM: ada0s1: geometry does not match label (255h,63s != 16h,63s). 0.000MB/s transfersPM status: 1 - 00000000 PM status: 2 - 00000000 PM status: 3 - 00000000 PM status: 4 - 00000000 pass1 at siisch2 bus 0 scbus2 target 15 lun 0 pass1: <Port Multiplier 37261095 1706> ATA/ATAPI-0 device pass1: 300.000MB/s transfers pass2 at ahcich1 bus 0 scbus5 target 0 lun 0 pass2: <ST3320418AS CC35> ATA/ATAPI-8 SATA 2.x device pass2: Serial Number 9VM1RYE5 pass2: 300.000MB/s transfers ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x12000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 SMP: AP CPU #2 Launched! cpu2 AP: ID: 0x14000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 SMP: AP CPU #3 Launched! cpu3 AP: ID: 0x16000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 18 vector 48 ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 20 vector 48 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 22 vector 48 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 18 vector 49 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 20 vector 49 ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 22 vector 49 msi: Assigning MSI-X IRQ 256 to local APIC 18 vector 50 msi: Assigning MSI-X IRQ 257 to local APIC 20 vector 50 msi: Assigning MSI-X IRQ 258 to local APIC 22 vector 50 msi: Assigning MSI-X IRQ 260 to local APIC 18 vector 51 msi: Assigning MSI-X IRQ 261 to local APIC 20 vector 51 msi: Assigning MSI IRQ 262 to local APIC 22 vector 51 (aprobe1:siisch2:0:0:0): SIGNATURE: 0000 pass3 at siisch2 bus 0 scbus2 target 0 lun 0 pass3: <ST31500341AS CC1H> ATA/ATAPI-8 SATA 2.x device pass3: Serial Number 9VS2FGFN pass3: 300.000MB/s transfers ada1 at siisch2 bus 0 scbus2 target 0 lun 0 ada1: <ST31500341AS CC1H> ATA/ATAPI-8 SATA 2.x device ada1: Serial Number 9VS2FGFN ada1: 300.000MB/s transfers ada1: 1430799MB (2930277168 512 byte sectors: 16H 63S/T 16383C) ada1: Native Command Queueing enabled GEOM: new disk ada1 Trying to mount root from ufs:/dev/label/OS/rootfs ct_to_ts([2009-10-26 09:41:15]) = 1256550075.000000000 start_init: trying /sbin/init em0: Link is up 1000 Mbps Full Duplex em0: link state changed to UP siisch0: Timeout on slot 26 siisch0: siis_timeout is 00000000 ss 04000000 rs 04000000 es 00000000 sts 801a2000 serr 00000000 siisch0: ready wait time=1ms siisch0: ready wait time=1ms siisch0: SIIS reset... siisch0: ready wait time=1ms siisch0: hardware reset ... siisch0: SATA connect time=0ms status=00000123 siisch0: ready wait time=0ms siisch0: SIIS reset done: devices=00000001 (aprobe0:siisch0:0:0:0): Command timed out (aprobe0:siisch0:0:0:0): error 5 (aprobe0:siisch0:0:0:0): Retries Exhausted siisch0: Timeout on slot 27 siisch0: siis_timeout is 00000000 ss 08000000 rs 08000000 es 00000000 sts 801b2000 serr 00000000 siisch0: ready wait time=1ms siisch0: ready wait time=1ms siisch0: SIIS reset... siisch0: ready wait time=1ms siisch0: hardware reset ... siisch0: SATA connect timeout status=00000001 siisch0: SIIS reset done: phy reset found no device (aprobe0:siisch0:0:1:0): Command timed out (aprobe0:siisch0:0:1:0): error 5 (aprobe0:siisch0:0:1:0): Retries Exhausted siisch0: DISCONNECT requested siisch0: CONNECT requested siisch0: SIIS reset... siisch0: ready wait time=1ms siisch0: hardware reset ... siisch0: SATA connect time=0ms status=00000123 siisch0: ready wait time=0ms siisch0: SIIS reset done: devices=00000001 siisch0: Timeout on slot 28 siisch0: siis_timeout is 00000000 ss 10000000 rs 10000000 es 00000000 sts 801c2000 serr 00000000 siisch0: ready wait time=1ms siisch0: ready wait time=1ms siisch0: SIIS reset... siisch0: ready wait time=1ms siisch0: hardware reset ... siisch0: SATA connect timeout status=00000001 siisch0: SIIS reset done: phy reset found no device (aprobe0:siisch0:0:2:0): Command timed out (aprobe0:siisch0:0:2:0): error 5 (aprobe0:siisch0:0:2:0): Retries Exhausted siisch0: DISCONNECT requested siisch0: CONNECT requested siisch0: SIIS reset... siisch0: ready wait time=1ms siisch0: hardware reset ... siisch0: SATA connect time=0ms status=00000123 siisch0: ready wait time=0ms siisch0: SIIS reset done: devices=00000001 siisch0: Timeout on slot 29 siisch0: siis_timeout is 00000000 ss 20000000 rs 20000000 es 00000000 sts 801d2000 serr 00000000 siisch0: ready wait time=1ms siisch0: ready wait time=1ms siisch0: SIIS reset... siisch0: ready wait time=1ms siisch0: hardware reset ... siisch0: SATA connect timeout status=00000001 siisch0: SIIS reset done: phy reset found no device (aprobe0:siisch0:0:3:0): Command timed out (aprobe0:siisch0:0:3:0): error 5 (aprobe0:siisch0:0:3:0): Retries Exhausted siisch0: DISCONNECT requested siisch0: CONNECT requested siisch0: SIIS reset... siisch0: ready wait time=1ms siisch0: hardware reset ... siisch0: SATA connect time=0ms status=00000123 siisch0: ready wait time=0ms siisch0: SIIS reset done: devices=00000001 siisch0: Timeout on slot 30 siisch0: siis_timeout is 00000000 ss 40000000 rs 40000000 es 00000000 sts 801e2000 serr 00000000 siisch0: ready wait time=1ms siisch0: ready wait time=1ms siisch0: SIIS reset... siisch0: ready wait time=1ms siisch0: hardware reset ... siisch0: SATA connect timeout status=00000001 siisch0: SIIS reset done: phy reset found no device (aprobe0:siisch0:0:4:0): Command timed out (aprobe0:siisch0:0:4:0): error 5 (aprobe0:siisch0:0:4:0): Retries Exhausted siisch0: DISCONNECT requested siisch0: CONNECT requested siisch0: SIIS reset... siisch0: ready wait time=1ms siisch0: hardware reset ... siisch0: SATA connect time=0ms status=00000123 siisch0: ready wait time=0ms siisch0: SIIS reset done: devices=00000001 PMP freeze: 0 PMP freeze: 1 PMP freeze: 2 PMP freeze: 3 PMP freeze: 4 siisch0: Timeout on slot 0 siisch0: siis_timeout is 00000000 ss 00000001 rs 00000001 es 00000000 sts 80002000 serr 00000000 siisch0: ready wait time=1ms siisch0: ready wait time=1ms siisch0: SIIS reset... siisch0: ready wait time=1ms siisch0: hardware reset ... siisch0: SATA connect time=0ms status=00000123 siisch0: ready wait time=0ms siisch0: SIIS reset done: devices=00000001 (pmp0:siisch0:0:15:0): Command timed out (pmp0:siisch0:0:15:0): Retrying Command siisch0: Timeout on slot 1 siisch0: siis_timeout is 00000000 ss 00000002 rs 00000002 es 00000000 sts 80012000 serr 00000000 siisch0: ready wait time=1ms siisch0: ready wait time=1ms siisch0: SIIS reset... siisch0: ready wait time=1ms siisch0: hardware reset ... siisch0: SATA connect time=0ms status=00000123 siisch0: ready wait time=0ms siisch0: SIIS reset done: devices=00000001 (pmp0:siisch0:0:15:0): Command timed out (pmp0:siisch0:0:15:0): error 5 (pmp0:siisch0:0:15:0): Retries Exhausted PMP release: 0 PMP release: 1 PMP release: 2 PMP release: 3 PMP release: 4 --------------070703010804050102070907--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4AE5AA43.7030405>