Date: Wed, 29 Dec 2004 00:46:45 +0100 From: Christian R. <cr@it.dk> To: freebsd-questions@freebsd.org Subject: FreeBSD 5.3-STABLE crashes on Dell PowerEdge 2850 Message-ID: <13s3t01kdpd1gtik7rouq2gmpevkgr13h4@4ax.com>
next in thread | raw e-mail | index | archive | help
I have installed FreeBSD 5.3-STABLE i386 on a new Dell PowerEdge 2850,
but it crashes under load. I can't figure why. Has anyone succeeded
running FreeBSD 5.3 on this hardware?
=46ollowing is the output from console made by two random crashes.
Crash #1:
=46atal trap 12: page fault while in kernel mode
cpuid =3D 0; apic id =3D 00
fault virtual address =3D 0x24
fault code =3D supervisor read, page not present
instruction pointer =3D 0x8:0xc039733e
stack pointer =3D 0x10:0xee15dc44
frame pointer =3D 0x10:0xee15dc6c
code segment =3D base 0x0, limit 0xfffff, type 0x1b
=3D DPL 0, pres 1, def32 1, gran 1
processor eflags =3D resume, IOPL =3D 0
current process =3D 122 (pagedaemon)
trap number =3D 12
panic: page fault
cpuid =3D 0
boot() called on cpu#0
Uptime: 4m58s
Cannot dump. No dump device definded.
Automatic reboot in 15 seconds - press a key on the console to abort
Rebooting...
cpu_reset called on cpu#0
cpu_reset: Stopping other CPUs
spin lock sched lock held by 0xc8b97190 for > 5 seconds
Crash #2:
fault virtual address =3D 0x24
fault code =3D supervisor read, page not present
instruction pointer =3D 0x8:xc3555da
stack pointer =3D 0x10:0xf08adaa4
frame pointer =3D 0x10:0xf08adacc
code segment =3D base 0x0, limit 0xfffff, type 0x1b
=3D DPL 0, pres 1, def32 1, gran 1
processor eflags =3D resume, IOPL =3D 0
current process =3D 610 (sshd)
trap number =3D 12
panic: page fault
cpuid =3D 1
=46atal double fault:
eip =3D 0xc032674a
esp =3D 0xec564ff8
ebp =3D 0xec565010
cpuid =3D 2; apic id =3D 06
=46atal double fault:
eip =3D 0xc032674a
esp =3D 0xee46eff4
ebp =3D 0xee46f00c
cpuid =3D 3; apic id =3D 07
spin lock sched lock held by 0xc8ad97d0 for > 5 seconds
Running for example "make buildworld" or rsync could make the server
crash, but it doesn't seems to crash, when it runs the distributed.net
client (100% CPU load), so I don't think it is a overheating problem.
The server has following configuration: 2x Intel Xeon 3.4 GHz (800 MHz
=46SB), 6x 1 GB DDR2 ECC RAM and Perc 4e/Di (LSI Logic/amr driver).
I have compiled the kernel with SMP of course and PAE because of >4 GB
memory. I have removed all the unnecessary devices.
I have been running memtest (http://www.memtest.org/) without any
errors.
Would it maybe be better to run the AMD64 version of FreeBSD 5.3? I
think the i386 version should be more stable?
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?13s3t01kdpd1gtik7rouq2gmpevkgr13h4>