Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 4 Mar 2014 12:20:01 GMT
From:      =?ISO-2022-JP?B?SGlyb28gT25vICgbJEI+LkxuNDJAOBsoQik=?= <hiroo.ono+freebsd@gmail.com>
To:        freebsd-usb@FreeBSD.org
Subject:   Re: usb/187188: [USB][patch] ELECOM WRH-150 needs a quirk
Message-ID:  <201403041220.s24CK1RD009200@freefall.freebsd.org>

next in thread | raw e-mail | index | archive | help
The following reply was made to PR usb/187188; it has been noted by GNATS.

From: =?ISO-2022-JP?B?SGlyb28gT25vICgbJEI+LkxuNDJAOBsoQik=?= <hiroo.ono+freebsd@gmail.com>
To: Hans Petter Selasky <hps@bitfrost.no>
Cc: freebsd-gnats-submit@freebsd.org
Subject: Re: usb/187188: [USB][patch] ELECOM WRH-150 needs a quirk
Date: Tue, 4 Mar 2014 21:15:42 +0900

 Hi,
 
 I have tried with stable r262711, and it is recognized as umodem0,
 same as with 10.0R.
 
 ugen4.3: <ELECOM CO., LTD.> at usbus4
 umodem0: <RNDIS COmmunications Control> on usbus4
 umodem0: data interface 1, has no CM over data, has no break
 
 This device is a NAT router, which has a (wired) ethernet interface
 for the WAN side.
 For the LAN side, it has a wireless interface and a USB interface.
 The USB interface has 2 configuration indexes.
 
 The config index 0 is recognized as umodem0, and config index 1 is
 recognized as ue0.
 For the usual case, I want it to be recognized as ue, which need a
 quirk to set the
 config index to 1.
 
 The user manual of this device says that, when I plug in the device to
 windows PC,
 the driver installation starts, and then it is recognized as an USB
 ethernet device.
 So, similar setting should be used for Windows.
 I do not know what the umodem of config index 0 is for. hrs@ who suggested me to
 use the quirk speculated that it might be used to update the firmware,
 but not sure.
 
 2014-03-03 17:16 GMT+09:00 Hans Petter Selasky <hps@bitfrost.no>:
 
 > If you upgrade to -stable there should be an RNDIS driver in FreeBSD now.
 > Have you tried that:
 >
 > /boot/kernel/if_urndis.ko
 >
 > http://svnweb.freebsd.org/changeset/base/262362
 >
 > --HPS



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201403041220.s24CK1RD009200>