Date: Thu, 30 May 2013 07:29:46 +0000 From: Alex Liptsin <alexl@mellanox.com> To: John Baldwin <jhb@freebsd.org>, "freebsd-net@freebsd.org" <freebsd-net@freebsd.org>, "freebsd-infiniband@freebsd.org" <freebsd-infiniband@freebsd.org> Cc: Ryan Stone <rysto32@gmail.com> Subject: RE: Create pkey on FreeBSD 9.1 Message-ID: <64DAB3164E410447932305F50F896D8D6AF665F7@MTLDAG01.mtl.com> In-Reply-To: <201305291321.08657.jhb@freebsd.org> References: <64DAB3164E410447932305F50F896D8D6AF63DB3@MTLDAG01.mtl.com> <CAFMmRNzaKbQqZNXODtF%2BLNk5y%2B%2B9Ky1B0VaAZpGLmQcyTwRM3Q@mail.gmail.com> <201305291321.08657.jhb@freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi John.
I did it, but there is no ping between the vlans. Ping without VLANs on th=
at ports pass.
Host1:
[root@qa-h-vrt-030-006 ~]# ifconfig ib0.100 create
[root@qa-h-vrt-030-006 ~]# ifconfig ib0.100 11.195.30.1/16 up
[root@qa-h-vrt-030-006 ~]# ifconfig
em0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=3D209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WO=
L_MAGIC>
ether 00:50:56:23:1e:06
inet6 fe80::250:56ff:fe23:1e06%em0 prefixlen 64 scopeid 0x2
inet 10.195.30.6 netmask 0xffff0000 broadcast 10.195.255.255
nd6 options=3D23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
lo0: flags=3D8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=3D600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
inet 127.0.0.1 netmask 0xff000000
nd6 options=3D23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
ib0: flags=3D8043<UP,BROADCAST,RUNNING,MULTICAST> metric 0 mtu 65520
options=3D80018<VLAN_MTU,VLAN_HWTAGGING,LINKSTATE>
lladdr 80.0.0.48.fe.80.0.0.0.0.0.0.0.2.c9.0.1.0.d0.51
inet6 fe80::250:56ff:fe23:1e06%ib0 prefixlen 64 scopeid 0x4
nd6 options=3D23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
ib1: flags=3D8002<BROADCAST,MULTICAST> metric 0 mtu 65520
options=3D80018<VLAN_MTU,VLAN_HWTAGGING,LINKSTATE>
lladdr 80.0.0.49.fe.80.0.0.0.0.0.0.0.2.c9.0.1.0.d0.52
nd6 options=3D23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
ib0.100: flags=3D8003<UP,BROADCAST,MULTICAST> metric 0 mtu 65520
options=3D80018<VLAN_MTU,VLAN_HWTAGGING,LINKSTATE>
lladdr 80.0.0.4a.fe.80.0.0.0.0.0.0.0.2.c9.0.1.0.d0.51
inet6 fe80::8200:4a:fe80:0%ib0.100 prefixlen 64 scopeid 0x6
inet 11.195.30.1 netmask 0xffff0000 broadcast 11.195.255.255
nd6 options=3D23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
vlan: 100 parent interface: ib0
Host2:
[root@qa-h-vrt-031-005 ~]# ifconfig ib0.100 create
[root@qa-h-vrt-031-005 ~]# ifconfig ib0.100 11.195.31.1/16 up
[root@qa-h-vrt-031-005 ~]# ifconfig
em0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=3D209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WO=
L_MAGIC>
ether 00:50:56:23:1f:05
inet6 fe80::250:56ff:fe23:1f05%em0 prefixlen 64 scopeid 0x2
inet 10.195.31.5 netmask 0xffff0000 broadcast 10.195.255.255
nd6 options=3D23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
lo0: flags=3D8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=3D600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
inet 127.0.0.1 netmask 0xff000000
nd6 options=3D23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
ib0: flags=3D8043<UP,BROADCAST,RUNNING,MULTICAST> metric 0 mtu 65520
options=3D80018<VLAN_MTU,VLAN_HWTAGGING,LINKSTATE>
lladdr 80.0.0.48.fe.80.0.0.0.0.0.0.0.2.c9.3.0.a0.65.91
inet6 fe80::250:56ff:fe23:1f05%ib0 prefixlen 64 scopeid 0x4
nd6 options=3D23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
ib1: flags=3D8002<BROADCAST,MULTICAST> metric 0 mtu 65520
options=3D80018<VLAN_MTU,VLAN_HWTAGGING,LINKSTATE>
lladdr 80.0.0.49.fe.80.0.0.0.0.0.0.0.2.c9.3.0.a0.65.92
nd6 options=3D23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
ib0.100: flags=3D8003<UP,BROADCAST,MULTICAST> metric 0 mtu 65520
options=3D80018<VLAN_MTU,VLAN_HWTAGGING,LINKSTATE>
lladdr 80.0.0.4a.fe.80.0.0.0.0.0.0.0.2.c9.3.0.a0.65.91
inet6 fe80::8200:4a:fe80:0%ib0.100 prefixlen 64 scopeid 0x6
inet 11.195.31.1 netmask 0xffff0000 broadcast 11.195.255.255
nd6 options=3D23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
vlan: 100 parent interface: ib0
[root@qa-h-vrt-031-005 ~]# ping 11.195.30.1
PING 11.195.30.1 (11.195.30.1): 56 data bytes
ping: sendto: Network is down
ping: sendto: Network is down
ping: sendto: Network is down
Regards,
Alex Liptsin
Software Quality Assurance Engineer | Mellanox Technologies Ltd.
Office: +972 (74) 7236141
Mobile: +972(54) 7833986
Fax: +972(74) 7236161=20
Email: alexl@mellanox.com
Mellanox, Tel-Hai Industrial Park. Building 7, M.P. Upper Galilee 12100 Isr=
ael
-----Original Message-----
From: John Baldwin [mailto:jhb@freebsd.org]=20
Sent: Wednesday, May 29, 2013 9:17 PM
To: freebsd-net@freebsd.org
Cc: Ryan Stone; Alex Liptsin
Subject: Re: Create pkey on FreeBSD 9.1
On Thursday, May 23, 2013 2:36:25 pm Ryan Stone wrote:
> On Thu, May 23, 2013 at 4:32 AM, Alex Liptsin <alexl@mellanox.com> wrote:
>=20
> > Hello.
> >
> > I have FreeBSD 9.1 installed.
> > There is mellanox adapter inside.
> > OFED support is already installed.
> >
> > I try to add pkeys on ib0 port.
> >
> > Usually in Linux I did:
> >
> > echo 0x800c > /sys/class/net/ib0/create_child
> >
> > ifconfig -a
> > To Make sure you see a new interface: ib0.800c
> >
> > How can I do it on FreeBSD? There is no "/sys/class/net/ib0/create_chil=
d"
> > directory.
> >
> > Regards,
> > Alex Liptsin
> >
> > _______________________________________________
> > freebsd-net@freebsd.org mailing list=20
> > http://lists.freebsd.org/mailman/listinfo/freebsd-net
> > To unsubscribe, send any mail to "freebsd-net-unsubscribe@freebsd.org"
> >
>=20
> From reading the source it looks like this is done by attaching a vlan=20
> interface to the interface. So try:
>=20
> ifconfig vlan create vlandev ib0 vlan 0xc
>=20
> This will create a new vlanX interface (ifconfig will its precise name=20
> with its unit number to stdout).
Simpler though is just 'ifconfig ib0.12 create' (and how most folks expect =
subinterfaces to be named).
--
John Baldwin
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?64DAB3164E410447932305F50F896D8D6AF665F7>