Date: Thu, 30 Apr 2009 01:28:12 +0200 From: Christof Schulze <christof.schulze@gmx.net> To: freebsd-hardware@freebsd.org Subject: Logitech Communicate STX + gspca Message-ID: <200904300128.19286.christof.schulze@gmx.net>
next in thread | raw e-mail | index | archive | help
--nextPart1411662.9a6EorSaPr Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline Hello everyone, this is my first post to this list, I hope my problem belongs here. I have a Logitech Communicate STX webcam which works under Linux using the= =20 gspca driver but not using FreeBSD.=20 When booting and loading the kernel module I get the [2] in dmesg, usbdevs is showing [1] I would love to use my webcam for skype with video but I am not sure what=20 information needs to be provided, and what I can do to help fix the=20 problem. This seems to be my Webcam: 0x08d7 Searching for that has turned up this site http://www.lissyara.su/?id=3D1850 which unfortunately is not readable by me. I would appreciate it if anyone could look into this. kind Regards Christof Schulze [1] output from usbdevs -v (shortened) % usbdevs = =20 addr 1: UHCI root hub, Intel addr 1: UHCI root hub, Intel addr 2: product 0x08d7, vendor 0x046d addr 1: UHCI root hub, Intel addr 1: UHCI root hub, Intel addr 2: Kyocera Mita FS-1020D, Kyocera Mita addr 3: USB Receiver, Logitech addr 1: EHCI root hub, Intel 1:20 eri.erika% usbdevs --help = =20 % usbdevs -v = =20 Controller /dev/usb0: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),=20 Intel(0x0000), rev 1.00 Controller /dev/usb1: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),=20 Intel(0x0000), rev 1.00 port 1 addr 2: full speed, power 100 mA, config 1, product 0x08d7(0x08d7),= =20 vendor 0x046d(0x046d), rev 1.00 Controller /dev/usb2: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),=20 Intel(0x0000), rev 1.00 Controller /dev/usb3: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),=20 Intel(0x0000), rev 1.00 port 1 addr 2: full speed, self powered, config 1, Kyocera Mita=20 =46S-1020D(0x000e), Kyocera Mita(0x0482), rev 0.00 port 2 addr 3: low speed, power 98 mA, config 1, USB Receiver(0xc518),=20 Logitech(0x046d), rev 42.00 Controller /dev/usb4: addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),=20 Intel(0x0000), rev 1.00 [1] dmesg (shortened) gspca_attach_bridge: USB GSPCA camera found.(ZC3XX)=20 spca5xx_probe: [spca5xx_probe:4259] Camera type JPEG=20 zc3xx_config: [zc3xx_config:616] Find Sensor HV7131R(c) spca5xx_getcapability: [spca5xx_getcapability:1239] maxw 640 maxh 480 minw= =20 176 minh 144 0 [1117] video_register_device: to be fixed but ok for now ldev0: vendor 0x046d product 0x08d7, rev 1.10/1.00, addr 2 uaudio0: <vendor 0x046d product 0x08d7, class 0/0, rev 1.10/1.00, addr 2>=20 on uhub1 uaudio0: audio rev 1.00 pcm1: <USB Audio> on uaudio0 ulpt0: <Kyocera Mita Kyocera Mita FS-1020D, class 0/0, rev 1.01/0.00, addr= =20 2> on uhub3 ulpt0: using bi-directional mode ums0: <Logitech USB Receiver, class 0/0, rev 2.00/42.00, addr 3> on uhub3 ums0: 16 buttons and Z dir. uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/42.00, addr 3> on uhub3 WARNING: ZFS is considered to be an experimental feature in FreeBSD. Timecounters tick every 1.000 msec firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me) firewire0: bus manager 0 (me) ZFS filesystem version 6 ZFS storage pool version 6 acd0: CDRW <SAMSUNG CDRW/DVD SM-352N/TA00> at ata0-master UDMA33 ad1: DMA limited to UDMA33, controller found non-ATA66 cable ad1: 190782MB <Seagate ST3200826A 3.02> at ata0-slave UDMA33 ad4: 78533MB <Hitachi HDS722580VLSA80 V32OA63A> at ata2-master SATA150 ad6: 238475MB <SAMSUNG SP2504C VT100-50> at ata3-master SATA150 ad10: 238475MB <SAMSUNG SP2504C VT100-50> at ata5-master SATA150 Waiting 5 seconds for SCSI devices to settle pcm0: <HDA Codec: Realtek ALC880> pcm0: <HDA Driver Revision: 20080420_0052> acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=3D0x24 ascq=3D0x00=20 acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=3D0x24 ascq=3D0x00=20 cd0 at ata0 bus 0 target 0 lun 0 cd0: <SAMSUNG CDRW/DVD SM-352N TA00> Removable CD-ROM SCSI-0 device=20 cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present -=20 tray closed SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/ad4s2a fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8 drm0: <ATI Radeon RV370 X300 SE> on vgapci0 info: [drm] Initialized radeon 1.25.0 20060524 info: [drm] Setting GART location based on new memory map info: [drm] Loading R300 Microcode info: [drm] writeback test succeeded in 1 usecs drm0: [ITHREAD] 67540 [1081] video_devdata: not complete but ok for now spca5xx_set_light_freq: [spca5xx_set_light_freq:1920] Sensor currently not= =20 support light frequency banding filters. gspca_set_isoc_ep: [gspca_set_isoc_ep:936] ISO EndPoint found 0x81=20 AlternateSet 7 ldev_ioctl: called linux: pid 2021 (skype): ioctl fd=3D9, cmd=3D0x7601 ('v',1) is not implemen= ted 69568 [ 959] usb_kill_urb: not complete but try something 69569 [ 766] ldev_isoc_handler: usbd_cancelled 0xc6609a00 69571 [ 766] ldev_isoc_handler: usbd_cancelled 0xcc0cb200 69572 [ 766] ldev_isoc_handler: usbd_cancelled 0xcc0b2a00 69573 [ 766] ldev_isoc_handler: usbd_cancelled 0xcbef3e00 69576 [ 959] usb_kill_urb: not complete but try something 69576 [ 959] usb_kill_urb: not complete but try something 69576 [ 959] usb_kill_urb: not complete but try something 9456429 [1081] video_devdata: not complete but ok for now spca5xx_set_light_freq: [spca5xx_set_light_freq:1920] Sensor currently not= =20 support light frequency banding filters. gspca_set_isoc_ep: [gspca_set_isoc_ep:936] ISO EndPoint found 0x81=20 AlternateSet 7 9457653 [ 770] ldev_isoc_handler: status 16 9457669 [ 770] ldev_isoc_handler: status 16 9457684 [ 770] ldev_isoc_handler: status 16 9457762 [ 770] ldev_isoc_handler: status 16 9459407 [ 959] usb_kill_urb: not complete but try something 9459410 [ 959] usb_kill_urb: not complete but try something 9459410 [ 959] usb_kill_urb: not complete but try something 9459410 [ 959] usb_kill_urb: not complete but try something --nextPart1411662.9a6EorSaPr Content-Type: application/pgp-signature; name=signature.asc Content-Description: This is a digitally signed message part. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.11 (FreeBSD) iEYEABECAAYFAkn44pMACgkQpZfyPAmdZJl/2wCgs8AN8NohwQCk0uetCLYgvjpT cJUAnRgQDthCCuoFVFXb2Yq6hguip4E7 =fiqC -----END PGP SIGNATURE----- --nextPart1411662.9a6EorSaPr--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200904300128.19286.christof.schulze>