Date: Sun, 08 Feb 2009 15:29:49 +0300 From: Subscriber <subscr1024@mail.ru> To: freebsd-x11@freebsd.org Cc: drl@BSD.my Subject: Re: usb stick not detected under X Message-ID: <498ED03D.9010007@mail.ru> In-Reply-To: <20090206114904.b3b6561a.drl@bsd.my> References: <20090206114904.b3b6561a.drl@bsd.my>
next in thread | previous in thread | raw e-mail | index | archive | help
Same effect. Before 'startx' all seems OK. I attached USB stick to notebook, and appropriate messages displayed in console: > umass0: <JetFlash Mass Storage Device, class 0/0, rev 2.00/1.42, addr 3> on > uhub5 > umass0: Get Max Lun not supported (STALLED) > (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 > (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition > (probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 > (probe0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed > (probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data) > da0 at umass-sim0 bus 0 target 0 lun 0 > da0: <JetFlash TS2GJFV90 8.07> Removable Direct Access SCSI-2 device > da0: 40.000MB/s transfers > da0: 1955MB (4005886 512 byte sectors: 255H 63S/T 249C) > GEOM_LABEL: Label for provider da0 is msdosfs/V90. But after starting graphic mode I tried to attach stick to three different USB ports and see in dmesg only: uhub5: device problem (TIMEOUT), disabling port 9 uhub5: device problem (TIMEOUT), disabling port 4 uhub5: device problem (TIMEOUT), disabling port 5 Darryl Yeoh пишет: > Hi Roland/lists, > > Sorry for cross-posting this. But I wasn't sure if this is a problem of USB or X11/HAL. I'm > experiencing something odd. Upon entering X, plugging in my usb stick doesn't get > detected. /var/log/messages don't show any related daX devices. It works If I exit X entirely. It > also works in single-mode. Oddly my external usb mouse works in X. Here's some info: > > OS: > FreeBSD matrix.bsd.my 7.1-STABLE FreeBSD 7.1-STABLE #0: Fri Jan 30 13:36:16 MYT 2009 > root@matrix.bsd.my:/usr/src/sys/i386/compile/INSP_1501 i386 > >>From /var/log/messages: > > Feb 6 10:59:54 matrix kernel: umass0: BBB reset failed, TIMEOUT > Feb 6 11:00:09 matrix kernel: umass0: BBB bulk-in clear stall failed, TIMEOUT > Feb 6 11:00:24 matrix kernel: umass0: BBB bulk-out clear stall failed, TIMEOUT > > Complete output of usbdevs -dv > > Controller /dev/usb0: > addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), ATI(0x0000), rev 1.00 > uhub0 > port 1 powered > port 2 powered > Controller /dev/usb1: > addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), ATI(0x0000), rev 1.00 > uhub1 > port 1 powered > port 2 powered > Controller /dev/usb2: > addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), ATI(0x0000), rev 1.00 > uhub2 > port 1 powered > port 2 powered > Controller /dev/usb3: > addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), ATI(0x0000), rev 1.00 > uhub3 > port 1 powered > port 2 powered > Controller /dev/usb4: > addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), ATI(0x0000), rev 1.00 > uhub4 > port 1 powered > port 2 powered > Controller /dev/usb5: > addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), ATI(0x0000), rev 1.00 > uhub5 > port 1 powered > port 2 powered > port 3 addr 0 should never happen! > port 4 powered > port 5 powered > port 6 powered > port 7 powered > port 8 powered > port 9 powered > port 10 powered > > pkg_info for xorg-server and hal: > > $ pkg_info -c /var/db/pkg/xorg-server* > Information for xorg-server-1.5.3_4,1: > > $ pkg_info -c /var/db/pkg/hal* > Information for hal-0.5.11_17: > > /etc/rc.conf: > moused_enable="NO" > dbus_enable="YES" > hald_enable="YES" > > Let me know if you need anything else. > > Darryl > _______________________________________________ > freebsd-x11@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-x11 > To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org" > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?498ED03D.9010007>