From owner-freebsd-net  Wed Oct 23 17:13:35 2002
Delivered-To: freebsd-net@freebsd.org
Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id C55FC37B401
	for <net@freebsd.org>; Wed, 23 Oct 2002 17:13:18 -0700 (PDT)
Received: from aaz.links.ru (aaz.links.ru [193.125.152.37])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 3DC4843E6A
	for <net@freebsd.org>; Wed, 23 Oct 2002 17:13:17 -0700 (PDT)
	(envelope-from babolo@aaz.links.ru)
Received: from aaz.links.ru (aaz.links.ru [193.125.152.37])
	by aaz.links.ru (8.12.6/8.12.6) with ESMTP id g9O0DcDh081413
	for <net@freebsd.org>; Thu, 24 Oct 2002 04:13:38 +0400 (MSD)
	(envelope-from babolo@aaz.links.ru)
Received: (from babolo@localhost)
	by aaz.links.ru (8.12.6/8.12.6/Submit) id g9O0DcLT081412
	for net@freebsd.org; Thu, 24 Oct 2002 04:13:38 +0400 (MSD)
Message-Id: <200210240013.g9O0DcLT081412@aaz.links.ru>
Subject: which resources ends with ste interface?
X-ELM-OSV: (Our standard violations) hdr-charset=KOI8-R; no-hdr-encoding=1
To: net@freebsd.org
Date: Thu, 24 Oct 2002 04:13:37 +0400 (MSD)
From: "."@babolo.ru
X-Mailer: ELM [version 2.4ME+ PL99b (25)]
MIME-Version: 1.0
Sender: owner-freebsd-net@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-net.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-net>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-net>
X-Loop: FreeBSD.org


I have a router with 5 ste FX NIC
and 1 xl TP NIC

ste0 is upstream, one ste not used and
all others are for home users net.

after down/up ste0 works good.
about 1 day or about 5..10 GByte,
then some received packets delays
for 1..2 seconds, then most received
packets delays for 2..5 seconds,
packet drop on receive drops.
Transmit is good.
Measured by ping between directly
connected host and tcpdump on both,
where instrument host has about zero traffic
and has no problems (it is console server)

User's ste interfaces works good after
ifconfig down/up, and delays appear
after massive arp scans, and usually
such a scan stops interface,
but state is UP.

I have no instrumental host in that
network, so I cant say, is tx functioning
or not in that state.

The good way to see breakage is
tcpdump -npiste0 ether broadcast and not ip > & /some/file &
(tcsh) and look in file after interface stops.
It ends up with huge amount of arp requests on
nonexistant hosts.
I reprodused this breakage.
2 sec of intensive arp scanes leads
to change ping time to one of users
from usual 0..10 msec to 2..3 sec for at least
10 min after scan ends.

I can't reproduce this reaction on arp scan on ste0,
mean ping time do not change in or after scan time.
But may be such a scan reduce time of good
work of ste0. I can try to increase of arp
scan time to test if need.

So my question is: how can I found the cause?
0tw~(12)#netstat -m
391/1056/65536 mbufs in use (current/peak/max):
        391 mbufs allocated to data
390/814/16384 mbuf clusters in use (current/peak/max)
1892 Kbytes allocated to network (3% of mb_map in use)
0 requests for memory denied
0 requests for memory delayed
0 calls to protocol drain routines

I saw 3 times bigger peak values, but
never saw values near the max.

0tw~(13)#uname -a
FreeBSD tw 4.7-STABLE FreeBSD 4.7-STABLE #2: Wed Oct 16 05:37:50 MSD 2002     babolo@banny.pike.ru:/tmp/babolo/usr/src/sys/gw  i386

dmesg exhausted by multiple
arp: X attempts to modify permanent entry for Y on ste4
and
ipfw: X Deny ...
strings, so part of /var/log/all instead:

Oct 23 16:18:39 tw /kernel: Copyright (c) 1992-2002 The FreeBSD Project.
Oct 23 16:18:39 tw /kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Oct 23 16:18:39 tw /kernel: The Regents of the University of California. All rights reserved.
Oct 23 16:18:39 tw /kernel: FreeBSD 4.7-STABLE #2: Wed Oct 16 05:37:50 MSD 2002
Oct 23 16:18:39 tw /kernel: babolo@banny.pike.ru:/tmp/babolo/usr/src/sys/gw
Oct 23 16:18:39 tw /kernel: Calibrating clock(s) ... TSC clock: 865576478 Hz, i8254 clock: 1193259 Hz
Oct 23 16:18:39 tw /kernel: CLK_USE_I8254_CALIBRATION not specified - using default frequency
Oct 23 16:18:39 tw /kernel: Timecounter "i8254"  frequency 1193182 Hz
Oct 23 16:18:39 tw /kernel: CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Oct 23 16:18:39 tw /kernel: CPU: VIA C3 Samuel 2 (865.52-MHz 686-class CPU)
Oct 23 16:18:39 tw /kernel: Origin = "CentaurHauls"  Id = 0x678  Stepping = 8
Oct 23 16:18:39 tw /kernel: Features=0x803035<FPU,DE,TSC,MSR,MTRR,PGE,MMX>
Oct 23 16:18:39 tw /kernel: real memory  = 134152192 (131008K bytes)
Oct 23 16:18:39 tw /kernel: Physical memory chunk(s):
Oct 23 16:18:39 tw /kernel: 0x00001000 - 0x0009efff, 647168 bytes (158 pages)
Oct 23 16:18:39 tw /kernel: 0x004d0000 - 0x07faffff, 128843776 bytes (31456 pages)
Oct 23 16:18:39 tw /kernel: config> di adv0
Oct 23 16:18:39 tw /kernel: config> di aha0
Oct 23 16:18:39 tw /kernel: config> di aic0
Oct 23 16:18:39 tw /kernel: config> di bt0
Oct 23 16:18:39 tw /kernel: config> di cs0
Oct 23 16:18:39 tw /kernel: config> di ed0
Oct 23 16:18:39 tw /kernel: config> di fe0
Oct 23 16:18:39 tw /kernel: config> di fdc0
Oct 23 16:18:39 tw /kernel: config> di lnc0
Oct 23 16:18:39 tw /kernel: config> di sn0
Oct 23 16:18:39 tw /kernel: config> di sio2
Oct 23 16:18:39 tw /kernel: config> q
Oct 23 16:18:39 tw /kernel: avail memory = 125022208 (122092K bytes)
Oct 23 16:18:39 tw /kernel: bios32: Found BIOS32 Service Directory header at 0xc00fdb20
Oct 23 16:18:39 tw /kernel: bios32: Entry = 0xfdb30 (c00fdb30)  Rev = 0  Len = 1
Oct 23 16:18:39 tw /kernel: pcibios: PCI BIOS entry at 0xdb51
Oct 23 16:18:39 tw /kernel: pnpbios: Found PnP BIOS data at 0xc00f6f70
Oct 23 16:18:39 tw /kernel: pnpbios: Entry = f0000:5fb4  Rev = 1.0
Oct 23 16:18:39 tw /kernel: Other BIOS signatures found:
Oct 23 16:18:39 tw /kernel: ACPI: 000fc3e0
Oct 23 16:18:39 tw /kernel: Preloaded elf kernel "kernel" at 0xc04a9000.
Oct 23 16:18:39 tw /kernel: Preloaded userconfig_script "/boot/kernel.conf" at 0xc04a90a8.
Oct 23 16:18:39 tw /kernel: VESA: information block
Oct 23 16:18:39 tw /kernel: 56 45 53 41 00 02 50 0b 00 c0 01 00 00 00 8b 0b 
Oct 23 16:18:39 tw /kernel: 00 c0 40 00 01 01 68 0b 00 c0 79 0b 00 c0 83 0b 
Oct 23 16:18:39 tw /kernel: 00 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
Oct 23 16:18:39 tw /kernel: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
Oct 23 16:18:39 tw /kernel: VESA: 63 mode(s) found
Oct 23 16:18:39 tw /kernel: VESA: v2.0, 4096k memory, flags:0x1, mode table:0xc00c0b8b (c0000b8b)
Oct 23 16:18:39 tw /kernel: VESA: S3 Incorporated. 86C362
Oct 23 16:18:39 tw /kernel: VESA: S3 Incorporated. Trio3D/2X Rev C
Oct 23 16:18:39 tw /kernel: pci_open(1):        mode 1 addr port (0x0cf8) is 0x8000006c
Oct 23 16:18:39 tw /kernel: pci_open(1a):       mode1res=0x80000000 (0x80000000)
Oct 23 16:18:39 tw /kernel: pci_cfgcheck:       device 0 [class=060000] [hdr=00] is there (id=30911106)
Oct 23 16:18:39 tw /kernel: Using $PIR table, 10 entries at 0xc00f7590
Oct 23 16:18:39 tw /kernel: npx0: <math processor> on motherboard
Oct 23 16:18:39 tw /kernel: npx0: INT 16 interface
Oct 23 16:18:39 tw /kernel: pcib0: <Host to PCI bridge> on motherboard
Oct 23 16:18:39 tw /kernel: found->     vendor=0x1106, dev=0x3091, revid=0x01
Oct 23 16:18:39 tw /kernel: class=06-00-00, hdrtype=0x00, mfdev=0
Oct 23 16:18:39 tw /kernel: subordinatebus=0    secondarybus=0
Oct 23 16:18:39 tw /kernel: map[10]: type 1, range 32, base e0000000, size 26
Oct 23 16:18:39 tw /kernel: found->     vendor=0x1106, dev=0xb091, revid=0x00
Oct 23 16:18:39 tw /kernel: class=06-04-00, hdrtype=0x01, mfdev=0
Oct 23 16:18:39 tw /kernel: subordinatebus=1    secondarybus=1
Oct 23 16:18:39 tw /kernel: found->     vendor=0x1186, dev=0x1002, revid=0x00
Oct 23 16:18:39 tw /kernel: class=02-00-00, hdrtype=0x00, mfdev=0
Oct 23 16:18:39 tw /kernel: subordinatebus=0    secondarybus=0
Oct 23 16:18:39 tw /kernel: intpin=a, irq=10
Oct 23 16:18:39 tw /kernel: map[10]: type 1, range 32, base 0000dc00, size  7
Oct 23 16:18:39 tw /kernel: map[14]: type 1, range 32, base dfffff80, size  7
Oct 23 16:18:39 tw /kernel: found->     vendor=0x1186, dev=0x1002, revid=0x00
Oct 23 16:18:39 tw /kernel: class=02-00-00, hdrtype=0x00, mfdev=0
Oct 23 16:18:39 tw /kernel: subordinatebus=0    secondarybus=0
Oct 23 16:18:39 tw /kernel: intpin=a, irq=11
Oct 23 16:18:39 tw /kernel: map[10]: type 1, range 32, base 0000d800, size  7
Oct 23 16:18:39 tw /kernel: map[14]: type 1, range 32, base dfffff00, size  7
Oct 23 16:18:39 tw /kernel: found->     vendor=0x1186, dev=0x1002, revid=0x00
Oct 23 16:18:39 tw /kernel: class=02-00-00, hdrtype=0x00, mfdev=0
Oct 23 16:18:39 tw /kernel: subordinatebus=0    secondarybus=0
Oct 23 16:18:39 tw /kernel: intpin=a, irq=12
Oct 23 16:18:39 tw /kernel: map[10]: type 1, range 32, base 0000d400, size  7
Oct 23 16:18:39 tw /kernel: map[14]: type 1, range 32, base dffffe80, size  7
Oct 23 16:18:39 tw /kernel: found->     vendor=0x1186, dev=0x1002, revid=0x00
Oct 23 16:18:39 tw /kernel: class=02-00-00, hdrtype=0x00, mfdev=0
Oct 23 16:18:39 tw /kernel: subordinatebus=0    secondarybus=0
Oct 23 16:18:39 tw /kernel: intpin=a, irq=5
Oct 23 16:18:39 tw /kernel: map[10]: type 1, range 32, base 0000d000, size  7
Oct 23 16:18:39 tw /kernel: map[14]: type 1, range 32, base dffffe00, size  7
Oct 23 16:18:39 tw /kernel: found->     vendor=0x1186, dev=0x1002, revid=0x00
Oct 23 16:18:39 tw /kernel: class=02-00-00, hdrtype=0x00, mfdev=0
Oct 23 16:18:39 tw /kernel: subordinatebus=0    secondarybus=0
Oct 23 16:18:39 tw /kernel: intpin=a, irq=10
Oct 23 16:18:39 tw /kernel: map[10]: type 1, range 32, base 0000cc00, size  7
Oct 23 16:18:39 tw /kernel: map[14]: type 1, range 32, base dffffd80, size  7
Oct 23 16:18:39 tw /kernel: found->     vendor=0x10b7, dev=0x9050, revid=0x00
Oct 23 16:18:39 tw /kernel: class=02-00-00, hdrtype=0x00, mfdev=0
Oct 23 16:18:39 tw /kernel: subordinatebus=0    secondarybus=0
Oct 23 16:18:39 tw /kernel: intpin=a, irq=11
Oct 23 16:18:39 tw /kernel: map[10]: type 1, range 32, base 0000c800, size  6
Oct 23 16:18:39 tw /kernel: found->     vendor=0x104c, dev=0x8020, revid=0x00
Oct 23 16:18:39 tw /kernel: class=0c-00-10, hdrtype=0x00, mfdev=0
Oct 23 16:18:39 tw /kernel: subordinatebus=0    secondarybus=0
Oct 23 16:18:39 tw /kernel: intpin=a, irq=12
Oct 23 16:18:39 tw /kernel: map[10]: type 1, range 32, base dffff000, size 11
Oct 23 16:18:39 tw /kernel: map[14]: type 1, range 32, base dfff8000, size 14
Oct 23 16:18:39 tw /kernel: found->     vendor=0x1106, dev=0x3074, revid=0x00
Oct 23 16:18:39 tw /kernel: class=06-01-00, hdrtype=0x00, mfdev=1
Oct 23 16:18:39 tw /kernel: subordinatebus=0    secondarybus=0
Oct 23 16:18:39 tw /kernel: found->     vendor=0x1106, dev=0x0571, revid=0x06
Oct 23 16:18:39 tw /kernel: class=01-01-8a, hdrtype=0x00, mfdev=0
Oct 23 16:18:39 tw /kernel: subordinatebus=0    secondarybus=0
Oct 23 16:18:39 tw /kernel: map[20]: type 1, range 32, base 0000ff00, size  4
Oct 23 16:18:39 tw /kernel: pci0: <PCI bus> on pcib0
Oct 23 16:18:39 tw /kernel: pcib1: <PCI to PCI bridge (vendor=1106 device=b091)> at device 1.0 on pci0
Oct 23 16:18:39 tw /kernel: found->     vendor=0x5333, dev=0x8a13, revid=0x02
Oct 23 16:18:39 tw /kernel: class=03-00-00, hdrtype=0x00, mfdev=0
Oct 23 16:18:39 tw /kernel: subordinatebus=0    secondarybus=0
Oct 23 16:18:39 tw /kernel: map[10]: type 1, range 32, base d8000000, size 26
Oct 23 16:18:39 tw /kernel: pci1: <PCI bus> on pcib1
Oct 23 16:18:39 tw /kernel: pci1: <S3 Trio3D/2X graphics accelerator> (vendor=0x5333, dev=0x8a13) at 0.0
Oct 23 16:18:39 tw /kernel: ste0: <D-Link DFE-550TX 10/100BaseTX> port 0xdc00-0xdc7f mem 0xdfffff80-0xdfffffff 
irq 10 at device 9.0 on pci0
Oct 23 16:18:39 tw /kernel: ste0: Ethernet address: 00:05:5d:f6:ac:57
Oct 23 16:18:39 tw /kernel: miibus0: <MII bus> on ste0
Oct 23 16:18:39 tw /kernel: acphy0: <AC101 10/100 media interface> on miibus0
Oct 23 16:18:39 tw /kernel: acphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX
Oct 23 16:18:39 tw /kernel: bpf: ste0 attached
Oct 23 16:18:39 tw /kernel: ste1: <D-Link DFE-550TX 10/100BaseTX> port 0xd800-0xd87f mem 0xdfffff00-0xdfffff7f 
irq 11 at device 10.0 on pci0
Oct 23 16:18:39 tw /kernel: ste1: Ethernet address: 00:05:5d:f6:ac:5b
Oct 23 16:18:39 tw /kernel: miibus1: <MII bus> on ste1
Oct 23 16:18:39 tw /kernel: acphy1: <AC101 10/100 media interface> on miibus1
Oct 23 16:18:39 tw /kernel: acphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX
Oct 23 16:18:39 tw /kernel: bpf: ste1 attached
Oct 23 16:18:39 tw /kernel: ste2: <D-Link DFE-550TX 10/100BaseTX> port 0xd400-0xd47f mem 0xdffffe80-0xdffffeff 
irq 12 at device 11.0 on pci0
Oct 23 16:18:39 tw /kernel: ste2: Ethernet address: 00:05:5d:f6:af:f9
Oct 23 16:18:39 tw /kernel: miibus2: <MII bus> on ste2
Oct 23 16:18:39 tw /kernel: acphy2: <AC101 10/100 media interface> on miibus2
Oct 23 16:18:39 tw /kernel: acphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX
Oct 23 16:18:39 tw /kernel: bpf: ste2 attached
Oct 23 16:18:39 tw /kernel: ste3: <D-Link DFE-550TX 10/100BaseTX> port 0xd000-0xd07f mem 0xdffffe00-0xdffffe7f 
irq 5 at device 12.0 on pci0
Oct 23 16:18:39 tw /kernel: ste3: Ethernet address: 00:05:5d:f6:ad:ab
Oct 23 16:18:39 tw /kernel: miibus3: <MII bus> on ste3
Oct 23 16:18:39 tw /kernel: acphy3: <AC101 10/100 media interface> on miibus3
Oct 23 16:18:39 tw /kernel: acphy3:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX
Oct 23 16:18:39 tw /kernel: bpf: ste3 attached
Oct 23 16:18:39 tw /kernel: ste4: <D-Link DFE-550TX 10/100BaseTX> port 0xcc00-0xcc7f mem 0xdffffd80-0xdffffdff 
irq 10 at device 13.0 on pci0
Oct 23 16:18:39 tw /kernel: using shared irq10.
Oct 23 16:18:39 tw /kernel: ste4: Ethernet address: 00:05:5d:f6:b0:05
Oct 23 16:18:39 tw /kernel: miibus4: <MII bus> on ste4
Oct 23 16:18:39 tw /kernel: acphy4: <AC101 10/100 media interface> on miibus4
Oct 23 16:18:39 tw /kernel: acphy4:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX
Oct 23 16:18:39 tw /kernel: bpf: ste4 attached
Oct 23 16:18:39 tw /kernel: xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xc800-0xc83f irq 11 at device 14.0 on 
pci0
Oct 23 16:18:39 tw /kernel: using shared irq11.
Oct 23 16:18:39 tw /kernel: xl0: Ethernet address: 00:10:4b:31:8a:8e
Oct 23 16:18:39 tw /kernel: xl0: media options word: e040
Oct 23 16:18:39 tw /kernel: xl0: found MII/AUTO
Oct 23 16:18:39 tw /kernel: miibus5: <MII bus> on xl0
Oct 23 16:18:39 tw /kernel: nsphy0: <DP83840 10/100 media interface> on miibus5
Oct 23 16:18:39 tw /kernel: nsphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Oct 23 16:18:39 tw /kernel: bpf: xl0 attached
Oct 23 16:18:39 tw /kernel: pci0: <unknown card> (vendor=0x104c, dev=0x8020) at 15.0 irq 12
Oct 23 16:18:39 tw /kernel: viapropm0: SMBus I/O base at 0x400
Oct 23 16:18:39 tw /kernel: viapropm0: <VIA VT8233 Power Management Unit> port 0x400-0x40f at device 17.0 on pc
i0
Oct 23 16:18:39 tw /kernel: viapropm0: SMBus revision code 0x0
Oct 23 16:18:39 tw /kernel: smb0: <SMBus general purpose I/O> on smbus0
Oct 23 16:18:39 tw /kernel: atapci0: <VIA 8233 ATA100 controller> port 0xff00-0xff0f at device 17.1 on pci0
Oct 23 16:18:39 tw /kernel: ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xff00
Oct 23 16:18:39 tw /kernel: ata0: mask=03 ostat0=50 ostat2=00
Oct 23 16:18:39 tw /kernel: ata0-master: ATAPI 00 00
Oct 23 16:18:39 tw /kernel: ata0-slave: ATAPI 00 00
Oct 23 16:18:39 tw /kernel: ata0: mask=03 stat0=50 stat1=00
Oct 23 16:18:39 tw /kernel: ata0-master: ATA 01 a5
Oct 23 16:18:39 tw /kernel: ata0: devices=01
Oct 23 16:18:39 tw /kernel: ata0: at 0x1f0 irq 14 on atapci0
Oct 23 16:18:39 tw /kernel: ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xff08
Oct 23 16:18:39 tw /kernel: ata1: mask=03 ostat0=50 ostat2=00
Oct 23 16:18:39 tw /kernel: ata1-master: ATAPI 00 00
Oct 23 16:18:39 tw /kernel: ata1-slave: ATAPI 00 00
Oct 23 16:18:39 tw /kernel: ata1: mask=03 stat0=50 stat1=00
Oct 23 16:18:39 tw /kernel: ata1-master: ATA 01 a5
Oct 23 16:18:39 tw /kernel: ata1: devices=01
Oct 23 16:18:39 tw /kernel: ata1: at 0x170 irq 15 on atapci0
Oct 23 16:18:39 tw /kernel: isa0: <ISA bus> on motherboard
Oct 23 16:18:39 tw /kernel: ex_isa_identify()
Oct 23 16:18:39 tw /kernel: ata-: ata0 exists, using next available unit number
Oct 23 16:18:39 tw /kernel: ata-: ata1 exists, using next available unit number
Oct 23 16:18:39 tw /kernel: Trying Read_Port at 203
Oct 23 16:18:39 tw /kernel: Trying Read_Port at 243
Oct 23 16:18:39 tw /kernel: Trying Read_Port at 283
Oct 23 16:18:39 tw /kernel: Trying Read_Port at 2c3
Oct 23 16:18:39 tw /kernel: Trying Read_Port at 303
Oct 23 16:18:39 tw /kernel: Trying Read_Port at 343
Oct 23 16:18:39 tw /kernel: Trying Read_Port at 383
Oct 23 16:18:39 tw /kernel: Trying Read_Port at 3c3
Oct 23 16:18:39 tw /kernel: isa_probe_children: disabling PnP devices
Oct 23 16:18:39 tw /kernel: isa_probe_children: probing non-PnP devices
Oct 23 16:18:39 tw /kernel: orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
Oct 23 16:18:39 tw /kernel: fdc0: not probed (disabled)
Oct 23 16:18:39 tw /kernel: ata2 failed to probe at port 0x1f0 irq 14 on isa0
Oct 23 16:18:39 tw /kernel: ata3 failed to probe at port 0x170 irq 15 on isa0
Oct 23 16:18:39 tw /kernel: adv0: not probed (disabled)
Oct 23 16:18:39 tw /kernel: bt0: not probed (disabled)
Oct 23 16:18:39 tw /kernel: aha0: not probed (disabled)
Oct 23 16:18:39 tw /kernel: aic0: not probed (disabled)
Oct 23 16:18:39 tw /kernel: atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
Oct 23 16:18:39 tw /kernel: atkbd0: <AT Keyboard> irq 1 on atkbdc0
Oct 23 16:18:39 tw /kernel: atkbd: the current kbd controller command byte 0065
Oct 23 16:18:39 tw /kernel: atkbd: keyboard ID 0x41ab (2)
Oct 23 16:18:39 tw /kernel: kbd0 at atkbd0
Oct 23 16:18:39 tw /kernel: kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
Oct 23 16:18:39 tw /kernel: psm0: current command byte:0065
Oct 23 16:18:39 tw /kernel: psm0: failed to reset the aux device.
Oct 23 16:18:39 tw /kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Oct 23 16:18:39 tw /kernel: fb0: vga0, vga, type:VGA (5), flags:0x700ff
Oct 23 16:18:39 tw /kernel: fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
Oct 23 16:18:39 tw /kernel: fb0: init mode:24, bios mode:3, current mode:24
Oct 23 16:18:39 tw /kernel: fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
Oct 23 16:18:39 tw /kernel: VGA parameters upon power-up
Oct 23 16:18:39 tw /kernel: 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
Oct 23 16:18:39 tw /kernel: bf 1f 00 4f 0d 0e 00 00 05 50 9c 8e 8f 28 1f 96 
Oct 23 16:18:39 tw /kernel: b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
Oct 23 16:18:39 tw /kernel: 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
Oct 23 16:18:39 tw /kernel: VGA parameters in BIOS for mode 24
Oct 23 16:18:39 tw /kernel: 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
Oct 23 16:18:39 tw /kernel: bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
Oct 23 16:18:39 tw /kernel: b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
Oct 23 16:18:39 tw /kernel: 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
Oct 23 16:18:39 tw /kernel: EGA/VGA parameters to be used for mode 24
Oct 23 16:18:39 tw /kernel: 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
Oct 23 16:18:39 tw /kernel: bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
Oct 23 16:18:39 tw /kernel: b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
Oct 23 16:18:39 tw /kernel: 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
Oct 23 16:18:39 tw /kernel: sc0: <System console> at flags 0x100 on isa0
Oct 23 16:18:39 tw /kernel: sc0: VGA <16 virtual consoles, flags=0x300>
Oct 23 16:18:39 tw /kernel: sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
Oct 23 16:18:39 tw /kernel: pcic0: not probed (disabled)
Oct 23 16:18:39 tw /kernel: pcic1: not probed (disabled)
Oct 23 16:18:39 tw /kernel: sio0: irq maps: 0x2001 0x2011 0x2001 0x2001
Oct 23 16:18:39 tw /kernel: sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
Oct 23 16:18:39 tw /kernel: sio0: type 16550A
Oct 23 16:18:39 tw /kernel: sio1: irq maps: 0x2001 0x2009 0x2001 0x2001
Oct 23 16:18:39 tw /kernel: sio1 at port 0x2f8-0x2ff irq 3 on isa0
Oct 23 16:18:39 tw /kernel: sio1: type 16550A
Oct 23 16:18:39 tw /kernel: sio2: not probed (disabled)
Oct 23 16:18:39 tw /kernel: sio3: not probed (disabled)
Oct 23 16:18:39 tw /kernel: dgb0: not probed (disabled)
Oct 23 16:18:39 tw /kernel: ppc0: parallel port found at 0x378
Oct 23 16:18:39 tw /kernel: ppc0: using extended I/O port range
Oct 23 16:18:39 tw /kernel: ppc0: ECP SPP ECP+EPP SPP
Oct 23 16:18:39 tw /kernel: ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
Oct 23 16:18:39 tw /kernel: ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
Oct 23 16:18:39 tw /kernel: ppc0: FIFO with 16/16/9 bytes threshold
Oct 23 16:18:39 tw /kernel: plip0: <PLIP network interface> on ppbus0
Oct 23 16:18:39 tw /kernel: bpf: lp0 attached
Oct 23 16:18:39 tw /kernel: lpt0: <Printer> on ppbus0
Oct 23 16:18:39 tw /kernel: lpt0: Interrupt-driven port
Oct 23 16:18:39 tw /kernel: ppi0: <Parallel I/O> on ppbus0
Oct 23 16:18:39 tw /kernel: vpo0: can't connect to the drive
Oct 23 16:18:39 tw /kernel: imm0: (disconnect) s1=0x38 s2=0x38, s3=0x38
Oct 23 16:18:39 tw /kernel: imm0: (connect) s1=0x38 s2=0x38, s3=0x38
Oct 23 16:18:39 tw last message repeated 2 times
Oct 23 16:18:39 tw /kernel: ed0: not probed (disabled)
Oct 23 16:18:39 tw /kernel: fe0: not probed (disabled)
Oct 23 16:18:39 tw /kernel: ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
Oct 23 16:18:39 tw /kernel: lnc0: not probed (disabled)
Oct 23 16:18:39 tw /kernel: cs0: not probed (disabled)
Oct 23 16:18:39 tw /kernel: sn0: not probed (disabled)
Oct 23 16:18:39 tw /kernel: pca0 at port 0x40 on isa0
Oct 23 16:18:39 tw /kernel: isa_probe_children: probing PnP devices
Oct 23 16:18:39 tw /kernel: BIOS Geometries:
Oct 23 16:18:39 tw /kernel: 0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
Oct 23 16:18:39 tw /kernel: 0 accounted for
Oct 23 16:18:39 tw /kernel: Device configuration finished.
Oct 23 16:18:39 tw /kernel: bpf: lo0 attached
Oct 23 16:18:39 tw /kernel: bpf: lo1 attached
Oct 23 16:18:39 tw /kernel: bpf: lo2 attached
Oct 23 16:18:39 tw /kernel: bpf: lo3 attached
Oct 23 16:18:39 tw /kernel: bpf: ppp0 attached
Oct 23 16:18:39 tw /kernel: new masks: bio 68c000, tty 63009a, net 671cba
Oct 23 16:18:39 tw /kernel: bpf: ds0 attached
Oct 23 16:18:39 tw /kernel: IPv6 packet filtering initialized, logging limited to 100 packets/entry
Oct 23 16:18:39 tw /kernel: bpf: stf0 attached
Oct 23 16:18:39 tw /kernel: DUMMYNET initialized (011031)
Oct 23 16:18:39 tw /kernel: bpf: faith0 attached
Oct 23 16:18:39 tw /kernel: ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to accept
, logging limited to 100 packets/entry by default
Oct 23 16:18:39 tw /kernel: bpf: vlan0 attached
Oct 23 16:18:39 tw /kernel: bpf: vlan1 attached
Oct 23 16:18:39 tw /kernel: bpf: vlan2 attached
Oct 23 16:18:39 tw /kernel: bpf: vlan3 attached
Oct 23 16:18:39 tw /kernel: bpf: vlan4 attached
Oct 23 16:18:39 tw /kernel: bpf: vlan5 attached
Oct 23 16:18:39 tw /kernel: bpf: vlan6 attached
Oct 23 16:18:39 tw /kernel: bpf: vlan7 attached
Oct 23 16:18:39 tw /kernel: BRIDGE 020214 loaded
Oct 23 16:18:39 tw /kernel: IP Filter: v3.4.29 initialized.  Default = pass all, Logging = enabled
Oct 23 16:18:39 tw /kernel: ad0: success setting UDMA5 on VIA chip
Oct 23 16:18:39 tw /kernel: Creating DISK ad0
Oct 23 16:18:39 tw /kernel: ar: FreeBSD check1 failed
Oct 23 16:18:39 tw /kernel: ad0: <SAMSUNG SV1021H/PJ100-21> ATA-6 disk at ata0-master
Oct 23 16:18:39 tw /kernel: ad0: 9732MB (19932192 sectors), 19774 C, 16 H, 63 S, 512 B
Oct 23 16:18:39 tw /kernel: ad0: 16 secs/int, 1 depth queue, UDMA100
Oct 23 16:18:39 tw /kernel: ad0: piomode=4 dmamode=2 udmamode=5 cblid=1
Oct 23 16:18:39 tw /kernel: ad2: success setting UDMA2 on VIA chip
Oct 23 16:18:39 tw /kernel: Creating DISK ad2
Oct 23 16:18:39 tw /kernel: ar: FreeBSD check1 failed
Oct 23 16:18:39 tw /kernel: ad2: <QUANTUM FIREBALL SE8.4A/API.0D00> ATA-3 disk at ata1-master
Oct 23 16:18:39 tw /kernel: ad2: 8063MB (16514064 sectors), 16383 C, 16 H, 63 S, 512 B
Oct 23 16:18:39 tw /kernel: ad2: 16 secs/int, 1 depth queue, UDMA33
Oct 23 16:18:39 tw /kernel: ad2: piomode=4 dmamode=2 udmamode=2 cblid=0
Oct 23 16:18:39 tw /kernel: Mounting root from ufs:/dev/ad0s1a
Oct 23 16:18:39 tw /kernel: ad0s1: type 0xa5, start 127008, end = 16514063, size 16387056 : OK
Oct 23 16:18:39 tw /kernel: ad0s4: type 0xa5, start 0, end = 127007, size 127008 : OK
Oct 23 16:18:39 tw /kernel: start_init: trying /sbin/init
Oct 23 16:18:39 tw /kernel: swapon: adding /dev/ad0s1b as swap device

141tw~(21)#strings /kernel | grep ^___ | sed -e 's|^___||'
#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
#    http://www.FreeBSD.org/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ./LINT configuration file. If you are
# in doubt as to the purpose or necessity of a line, check first in LINT.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.33 2001/07/30 17:31:40 wpaul Exp $
machine         i386
#cpu            I386_CPU
#cpu            I486_CPU
cpu             I586_CPU
cpu             I686_CPU
#options        CPU_SUSP_HLT
options         CPU_WT_ALLOC
options         NO_F00F_HACK
ident           gw
maxusers        128
options         MAXDSIZ="(512*1024*1024)"
options         INCLUDE_CONFIG_FILE     # Include this file in kernel
options         MSGBUF_SIZE=262144
options         NMBCLUSTERS=16384
options         INVARIANTS
options         INVARIANT_SUPPORT
options         DIAGNOSTIC
options         AUTO_EOI_1
#options        AUTO_EOI_2
makeoptions     DEBUG=-g                #Build kernel with gdb(1) debug symbols
#options        MATH_EMULATE            #Support for x87 emulation
options         INET                    #InterNETworking
options         INET6                   #IPv6 communications protocols
options         FFS                     #Berkeley Fast Filesystem
options         FFS_ROOT                #FFS usable as root device [keep this!]
options         SOFTUPDATES             #Enable FFS soft updates support
options         UFS_DIRHASH             #Improve performance on big directories
#options        MFS                     #Memory Filesystem
#options        MD_ROOT                 #MD is a potential root device
options         NFS                     #Network Filesystem
#options        NFS_ROOT                #NFS usable as root device, NFS required
#options        MSDOSFS                 #MSDOS Filesystem
#options        CD9660                  #ISO 9660 Filesystem
#options        CD9660_ROOT             #CD-ROM usable as root, CD9660 required
options         PROCFS                  #Process filesystem
options         COMPAT_43               #Compatible with BSD 4.3 [KEEP THIS!]
options         SCSI_DELAY=15000        #Delay (in ms) before probing SCSI
options         UCONSOLE                #Allow users to grab the console
options         USERCONFIG              #boot -c editor
options         VISUAL_USERCONFIG       #visual boot -c editor
options         KTRACE                  #ktrace(1) support
options         SYSVSHM                 #SYSV-style shared memory
options         SYSVMSG                 #SYSV-style message queues
options         SYSVSEM                 #SYSV-style semaphores
options         SHMALL=16384
options         SHMMAX="(SHMMAXPGS*PAGE_SIZE+1)"
options         SHMMAXPGS=8192
options         SHMMIN=128
options         SHMMNI=256
options         SHMSEG=512
options         NSWAPDEV=2
options         P1003_1B                #Posix P1003_1B real-time extensions
options         _KPOSIX_PRIORITY_SCHEDULING
options         ICMP_BANDLIM            #Rate limit bad replies
options         KBD_INSTALL_CDEV        # install a CDEV entry in /dev
options         USER_LDT                #allow user-level control of i386 ldt
options         PERFMON
options         NETGRAPH                #netgraph(4) system
options         MYLOOP_MASKLEN=24
options         IPV6FIREWALL            #firewall for IPv6
options         IPV6FIREWALL_VERBOSE
options         IPV6FIREWALL_VERBOSE_LIMIT=100
options         IPFIREWALL              #firewall
options         IPFIREWALL_VERBOSE      #print information about
                                        # dropped packets
options         IPFW2
options         IPFIREWALL_FORWARD      #enable transparent proxy support
options         IPFIREWALL_VERBOSE_LIMIT=100    #limit verbosity
options         IPFIREWALL_DEFAULT_TO_ACCEPT    #allow everything by default
options         IPDIVERT                #divert sockets
options         IPFILTER                #ipfilter support
options         IPFILTER_LOG            #ipfilter logging
options         IPSTEALTH               #support for stealth forwarding
options         RANDOM_IP_ID
options         DUMMYNET
options         BRIDGE
# To make an SMP kernel, the next two are needed
#options        SMP                     # Symmetric MultiProcessor Kernel
#options        APIC_IO                 # Symmetric (APIC) I/O
device          isa
#device         eisa
device          pci
# Floppy drives
device          fdc0    at isa? port IO_FD1 irq 6 drq 2
device          fd0     at fdc0 drive 0
device          fd1     at fdc0 drive 1
# ATA and ATAPI devices
device          ata0    at isa? port IO_WD1 irq 14
device          ata1    at isa? port IO_WD2 irq 15
device          ata
device          atadisk                 # ATA disk drives
device          atapicd                 # ATAPI CDROM drives
device          atapifd                 # ATAPI floppy drives
device          atapist                 # ATAPI tape drives
options         ATA_STATIC_ID           #Static device numbering
# SCSI Controllers
device          ahc             # AHA2940 and onboard AIC7xxx devices
options         AHC_ALLOW_MEMIO
device          amd             # AMD 53C974 (Tekram DC-390(T))
device          isp             # Qlogic family
device          ncr             # NCR/Symbios Logic
device          sym             # NCR/Symbios Logic (newer chipsets)
options         SYM_SETUP_LP_PROBE_MAP=0x40
                                # Allow ncr to attach legacy NCR devices when 
                                # both sym and ncr are configured
device          adv0    at isa?
device          adw
device          bt0     at isa?
device          aha0    at isa?
device          aic0    at isa?
# SCSI peripherals
device          scbus           # SCSI bus (required)
device          da              # Direct Access (disks)
device          sa              # Sequential Access (tape etc)
device          cd              # CD
device          pass            # Passthrough device (direct SCSI access)
# atkbdc0 controls both the keyboard and the PS/2 mouse
device          atkbdc0 at isa? port IO_KBD
device          atkbd0  at atkbdc? irq 1
device          psm0    at atkbdc? irq 12
device          vga0    at isa?
options         VGA_WIDTH90             # support 90 column modes
options         VESA
# splash screen/screen saver
pseudo-device   splash
# syscons is the default console driver, resembling an SCO console
device          sc0     at isa? flags 0x100
options         SC_HISTORY_SIZE=2118    # number of history buffer lines
options         SC_MOUSE_CHAR=0x3       # char code for text mode mouse cursor
options         SC_NORM_ATTR="(FG_BROWN|BG_BLACK)"
options         SC_NORM_REV_ATTR="(FG_BLACK|BG_RED)"
options         SC_KERNEL_CONS_ATTR="(FG_YELLOW|BG_BROWN)"
options         SC_KERNEL_CONS_REV_ATTR="(FG_WHITE|BG_RED)"
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device         vt0     at isa?
#options        XSERVER                 # support for X server on a vt console
#options        FAT_CURSOR              # start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options        PCVT_SCANSET=2          # IBM keyboards are non-std
# Floating point support - do not disable.
device          npx0    at nexus? port IO_NPX irq 13
# Power management support (see LINT for more options)
device          apm0    at nexus? disable flags 0x20 # Advanced Power Management
# PCCARD (PCMCIA) support
device          card
device          pcic0   at isa? irq 0 port 0x3e0 iomem 0xd0000 disable
device          pcic1   at isa? irq 0 port 0x3e2 iomem 0xd4000 disable
# Serial (COM) ports
options         CONSPEED=115200
options         COM_MULTIPORT           #code for some cards with shared IRQs
device          sio0    at isa? port IO_COM1 flags 0x10 irq 4
device          sio1    at isa? port IO_COM2 irq 3
device          sio2    at isa? port IO_COM3 irq 5
device          sio3    at isa? disable port IO_COM4 irq 9
device          dgb0    at isa? disable port 0x320 iomem 0xc0000 flags 0x01
options         NDGBPORTS=8     # Defaults to 16*NDGB
#device         dgm0    at isa? port 0x104 iomem 0xd0000 flags 0x01
# Parallel port
device          ppc0    at isa? irq 7
device          ppbus           # Parallel port bus (required)
device          lpt             # Printer
device          plip            # TCP/IP over parallel
device          ppi             # Parallel port interface device
device          vpo             # Requires scbus and da
device          lpbb    #Philips parallel port I2C bit-banging interface
options         DEVICE_POLLING
# PCI Ethernet NICs.
device          de              # DEC/Intel DC21x4x (``Tulip'')
device          txp             # 3Com 3cR990 (``Typhoon'')
device          vx              # 3Com 3c590, 3c595 (``Vortex'')
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device          miibus          # MII bus support
device          dc              # DEC/Intel 21143 and various workalikes
device          fxp             # Intel EtherExpress PRO/100B (82557, 82558)
device          pcn             # AMD Am79C97x PCI 10/100 NICs
device          rl              # RealTek 8129/8139
device          sf              # Adaptec AIC-6915 (``Starfire'')
device          sis             # Silicon Integrated Systems SiS 900/SiS 7016
device          ste             # Sundance ST201 (D-Link DFE-550TX)
device          tl              # Texas Instruments ThunderLAN
device          tx              # SMC EtherPower II (83c170 ``EPIC'')
device          vr              # VIA Rhine, Rhine II
device          wb              # Winbond W89C840F
device          wx              # Intel Gigabit Ethernet Card (``Wiseman'')
device          xl              # 3Com 3c90x (``Boomerang'', ``Cyclone'')
device          bge             # Broadcom BCM570x (``Tigon III'')
# ISA Ethernet NICs.
# 'device ed' requires 'device miibus'
device          ed0     at isa? port 0x280 irq 10 iomem 0xd8000
device          ex
device          ep
device          fe0     at isa? port 0x300
# Xircom Ethernet
device          xe
# PRISM I IEEE 802.11b wireless NIC.
device          awi
# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
# exists only as a PCMCIA device, so there is no ISA attachment needed
# and resources will always be dynamically assigned by the pccard code.
device          wi
# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
# mode (the factory default). If you set the switches on your ISA
# card for a manually chosen I/O address and IRQ, you must specify
# those parameters here.
device          an
# The probe order of these is presently determined by i386/isa/isa_compat.c.
device          ie0     at isa? port 0x300 irq 10 iomem 0xd0000
#device         le0     at isa? port 0x300 irq 5 iomem 0xd0000
device          lnc0    at isa? port 0x280 irq 10 drq 0
device          cs0     at isa? port 0x300
device          sn0     at isa? port 0x300 irq 10
# Pseudo devices - the number indicates how many units to allocate.
pseudo-device   loop    4       # Network loopback
pseudo-device   ether           # Ethernet support
pseudo-device   vlan    8       #VLAN support
#pseudo-device  sl      4       # Kernel SLIP
pseudo-device   ppp     1       # Kernel PPP
options         PPP_BSDCOMP     #PPP BSD-compress support
options         PPP_DEFLATE     #PPP zlib/deflate/gzip support
options         PPP_FILTER      #enable bpf filtering (needs bpf)
pseudo-device   tun     4       # Packet tunnel.
pseudo-device   pty             # Pseudo-ttys (telnet etc)
#pseudo-device  md              # Memory "disks"
pseudo-device   gif             # IPv6 and IPv4 tunneling
pseudo-device   faith   1       # IPv6-to-IPv4 relaying (translation)
pseudo-device   stf     1       #6to4 IPv6 over IPv4 encapsulation
pseudo-device   speaker         #Play IBM BASIC-style noises out your speaker
pseudo-device   gzip            #Exec gzipped a.out's
pseudo-device   disc            #Discard device (ds0, ds1, etc)
# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device   bpf     32      #Berkeley packet filter
# USB support
#device         uhci            # UHCI PCI->USB interface
#device         ohci            # OHCI PCI->USB interface
#device         usb             # USB Bus (required)
#device         ugen            # Generic
#device         uhid            # "Human Interface Devices"
#device         ukbd            # Keyboard
#device         ulpt            # Printer
#device         umass           # Disks/Mass storage - Requires scbus and da
#device         umodem          # USB modem support
#device         ums             # Mouse
#device         uscanner        # USB scanners
# USB Ethernet, requires mii
#device         aue             # ADMtek USB ethernet
#device         cue             # CATC USB ethernet
#device         kue             # Kawasaki LSI USB ethernet
#device         pcm
device          pca0    at isa? port IO_TIMER1
device          smbus
device          intpm
device          alpm
device          viapm
device          ichsmb
device          smb
device          iicbus
device          iicbb
device          ic
device          iic
device          iicsmb          # smb over i2c bridge
0tw~(22)#cat /etc/sysctl.conf 
# $FreeBSD: src/etc/sysctl.conf,v 1.1.2.3 2002/04/15 00:44:13 dougb Exp $
#
#  This file is read when going to multi-user and its contents piped thru
#  ``sysctl'' to adjust kernel values.  ``man 5 sysctl.conf'' for details.
#

vfs.nfs.gatherdelay=0
vfs.nfs.async=1
kern.ipc.somaxconn=1024
kern.ipc.maxsockbuf=1048576
kern.polling.enable=1
vfs.vmiodirenable=1
net.inet.raw.recvspace=65536
net.inet.ip.fastforwarding=0
net.inet.ip.ttl=59
net.inet.ip.fw.one_pass=0
#net.inet.tcp.sendspace=65536
#net.inet.tcp.recvspace=65536
net.link.ether.inet.proxyall=1
debug.bpf_bufsize=524288
net.inet.ip.redirect=0

Lot of static arps, ipfw rules and routes to ds0

Sorry, my English is bad.


-- 
@BABOLO      http://links.ru/

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-net" in the body of the message