Date: Thu, 20 Mar 2003 14:12:31 +0100 From: "Gerrit Hannaert" <degerrit@web.de> To: AIC7xxx@FreeBSD.ORG Subject: Re: Problem with 29160 and ADIC Tape Library Message-ID: <200303201312.h2KDCV208524@mailgate5.cinetic.de>
next in thread | raw e-mail | index | archive | help
Hi Sven, Oh boy, that sounds very familiar. We have an IBM Ultrium 3583 (~ OEM Scalar 100) with two LTO drives and have had it both SAN attached (via a gateway), but currently attached to an Adaptec 29160. While we've experienced a plethora of (reproducible) error messages on both the Qlogic HBA and the current SCSI, with SCSI what seems to have helped was to set the card to 40Mhz/8-bit for the changer, and the two drives, and disable Int13. Obviously checking the cables and termination is the first option, but I assume that's been done We're using SuSE Linux 8.1 with updated kernel but with (SuSE) standard Adaptec drivers, Rev 6.2.8 in this case. What SCSI card exactly are you using, what server is it? Keep us updated.... - Gerrit Sven Peters wrote: > Hi, > > We experience a reproducable error on our backup machine which uses an > ADIC Scalar 100 Tape robot and two LTO drives. > > During the backup if a command to the library is send (which is ASYNC) the > kernel crashes with the following lines in /var/log/messages: > > Mar 9 04:02:19 legatore kernel: scsi0:0:1:0: Attempting to queue an ABORT > message > Mar 9 04:02:19 legatore kernel: scsi0: Dumping Card State while idle, at > SEQADDR 0x18 > Mar 9 04:02:19 legatore kernel: ACCUM = 0x3, SINDEX = 0x48, DINDEX = 0xe4, > ARG_2 = 0x0 > Mar 9 04:02:19 legatore kernel: HCNT = 0x0 SCBPTR = 0x1 > Mar 9 04:02:19 legatore kernel: SCSISEQ = 0x5a, SBLKCTL = 0xa > Mar 9 04:02:19 legatore kernel: DFCNTRL = 0x0, DFSTATUS = 0x89 > Mar 9 04:02:19 legatore kernel: LASTPHASE = 0x1, SCSISIGI = 0xb6, SXFRCTL0 > = 0x80 > Mar 9 04:02:19 legatore kernel: SSTAT0 = 0x40, SSTAT1 = 0x19 > Mar 9 04:02:19 legatore kernel: SCSIPHASE = 0x4 > Mar 9 04:02:19 legatore kernel: STACK == 0x17, 0x175, 0x160, 0x0 > Mar 9 04:02:19 legatore kernel: SCB count = 4 > Mar 9 04:02:19 legatore kernel: Kernel NEXTQSCB = 1 > Mar 9 04:02:19 legatore kernel: Card NEXTQSCB = 1 > Mar 9 04:02:19 legatore kernel: QINFIFO entries: > Mar 9 04:02:19 legatore kernel: Waiting Queue entries: 1:3 > Mar 9 04:02:19 legatore kernel: Disconnected Queue entries: > Mar 9 04:02:19 legatore kernel: QOUTFIFO entries: > Mar 9 04:02:19 legatore kernel: Sequencer Free SCB List: 0 2 3 4 5 6 7 8 9 > 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 > Mar 9 04:02:19 legatore kernel: Sequencer SCB Info: 0(c 0x40, s 0x27, l 0, > t 0xff) 1(c 0x40, s 0x17, l 0, t 0x3) 2(c 0x0, s 0xb3, l 190, t 0xff) 3(c > 0x0, s 0xff, l 231, t 0xff) 4(c 0x0, s 0x0, l 0, t 0xff) 5(c 0x0, s 0xff, l > 155, t 0xff) 6(c 0x0, s 0xec, l 255, t 0xff) 7(c 0x0, s 0x7f, l 251, t 0xff) > 8(c 0x0, s 0x47, l 124, t 0xff) 9(c 0x0, s 0xfd, l 176, t 0xff) 10(c 0x0, s > 0xfd, l 223, t 0xff) 11(c 0x0, s 0x6b, l 255, t 0xff) 12(c 0x0, s 0xce, l > 230, t 0xff) 13(c 0x0, s 0xff, l 255, t 0xff) 14(c 0x0, s 0x76, l 219, t > 0xff) 15(c 0x0, s 0x64, l 247, t 0xff) 16(c 0x0, s 0x3a, l 255, t 0xff) 17(c > 0x0, s 0x3f, l 252, t 0xff) 18(c 0x0, s 0x7f, l 125, t 0xff) 19(c 0x0, s > 0xd7, l 255, t 0xff) 20(c 0x0, s 0xff, l 183, t 0xff) 21(c 0x0, s 0x77, l > 127, t 0xff) 22(c 0x0, s 0x3f, l 251, t 0xff) 23(c 0x0, s 0xff, l 91, t > 0xff) 24(c 0x0, s 0xcf, l 187, t 0xff) 25(c 0x0, s 0xda, l 111, t 0xff) 26(c > 0x0, s 0xb5, l 254, t 0xff) 27(c 0x0, s 0xcf, l 119, t 0xff) 28(c 0x0, s > 0xff, l 157, t 0xff) 29(c 0x0, s 0x6f, l 255, t 0xff) 30 > Mar 9 04:02:19 legatore kernel: c 0x0, s 0xff, l 110, t 0xff) 31(c 0x0, s > 0xef, l 253, t 0xff) > Mar 9 04:02:19 legatore kernel: Pending list: 3(c 0x40, s 0x17, l 0) > Mar 9 04:02:19 legatore kernel: Kernel Free SCB list: 2 0 > Mar 9 04:02:19 legatore kernel: Untagged Q(1): 3 > Mar 9 04:02:19 legatore kernel: DevQ(0:0:0): 0 waiting > Mar 9 04:02:19 legatore kernel: DevQ(0:1:0): 0 waiting > Mar 9 04:02:19 legatore kernel: DevQ(0:2:0): 0 waiting > Mar 9 04:02:19 legatore kernel: scsi0:0:1:0: Cmd aborted from QINFIFO > Mar 9 04:02:19 legatore kernel: aic7xxx_abort returns 0x2002 > > I already used the newest driver from adaptec (6.2.10) - and still the same > error. > Kernel ist 2.4.18. > > Any help is really appreciated since we are stuck for 3 days now > > Regards & Thanks in advance > -Sven Peters ______________________________________________________________________________ Sie haben mehr zu sagen als in eine SMS passt? Mit WEB.DE FreeMail ist das jetzt kein Problem mehr! http://freemail.web.de/features/?mc=021182 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe aic7xxx" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200303201312.h2KDCV208524>