Date: Fri, 22 Nov 2002 09:27:14 +0100 From: Michael Bretterklieber <mbretter@jawa.at> To: Mitsuru IWASAKI <iwasaki@jp.FreeBSD.org> Cc: current@FreeBSD.ORG, acpi-jp@jp.FreeBSD.org Subject: Re: Call for testers: acpica-unix-20021118.tar.gz Message-ID: <3DDDEA62.4090607@jawa.at> References: <20021121.194205.48537091.iwasaki@jp.FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. --------------010105080805080406020405 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Hi, I tested the patches on my Sony FX601. The problem is still the machine starts resuming after suspending to S3, but the display stays black. I attached my dmesg output and the output from acpidump, ... there are a lot of acpi related errors bye, Mitsuru IWASAKI schrieb: > Hi all, > > I've made patches for the latest ACPI CA snapshot between 20021002 and > 20021118. > http://people.freebsd.org/~iwasaki/acpi/acpica-20021002-20021118-test20021121.diff > > A lot of bugs are fixed, please check the change log at: > http://developer.intel.com/technology/iapc/acpi/downloads/CHANGES.txt > > Please test them and feedback to acpi-jp@jp.freebsd.org if you find any > problems. I'll import them into src tree before RC1. -- ------------------------------- ---------------------------------- Michael Bretterklieber - Michael.Bretterklieber@jawa.at JAWA Management Software GmbH - http://www.jawa.at Liebenauer Hauptstr. 200 -------------- privat ------------ A-8041 GRAZ GSM: ++43-(0)676-93 96 698 Tel: ++43-(0)316-403274-12 E-mail: mbretter@inode.at Fax: ++43-(0)316-403274-10 http://www.inode.at/mbretter ------------------------------- ---------------------------------- "...the number of UNIX installations has grown to 10, with more expected..." - Dennis Ritchie and Ken Thompson, June 1972 --------------010105080805080406020405 Content-Type: text/plain; name="dmes.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmes.txt" Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #1: Fri Nov 22 09:01:12 CET 2002 root@dings.jawa.at:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc06ab000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06ab0a8. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 1100044126 Hz CPU: mobile AMD Duron(tm) (1100.04-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x662 Stepping = 2 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> AMD Features=0xffffffffc0400000<AMIE,DSP,3DNow!> real memory = 268435456 (262144K bytes) avail memory = 253554688 (247612K bytes) Initializing GEOMetry subsystem Pentium Pro MTRR support enabled npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <SONY K5 > on motherboard ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15 Using $PIR table, 6 entries at 0xc00fdf60 acpi0: power button is handled as a fixed feature programming model. Timecounter "ACPI-safe" frequency 3579545 Hz acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_tz0: <thermal zone> on acpi0 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ---- initial configuration ------------------------ \\_SB_.PCI0.PIB_.LNKC irq 5: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.1.0 \\_SB_.PCI0.PIB_.LNKA irq 9: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.7.0 \\_SB_.PCI0.PIB_.LNKB irq 10: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.7.1 \\_SB_.PCI0.PIB_.LNKC irq 5: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.7.2 \\_SB_.PCI0.PIB_.LNKD irq 9: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.7.3 \\_SB_.PCI0.PIB_.LNKA irq 9: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.10.0 \\_SB_.PCI0.PIB_.LNKB irq 10: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.10.1 \\_SB_.PCI0.PIB_.LNKD irq 9: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.14.0 \\_SB_.PCI0.PIB_.LNKB irq 10: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.16.0 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.PCI0.PIB_.LNKC irq 5: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.1.0 \\_SB_.PCI0.PIB_.LNKA irq 9: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.7.0 \\_SB_.PCI0.PIB_.LNKB irq 10: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.7.1 \\_SB_.PCI0.PIB_.LNKC irq 5: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.7.2 \\_SB_.PCI0.PIB_.LNKD irq 9: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.7.3 \\_SB_.PCI0.PIB_.LNKA irq 9: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.10.0 \\_SB_.PCI0.PIB_.LNKB irq 10: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.10.1 \\_SB_.PCI0.PIB_.LNKD irq 9: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.14.0 \\_SB_.PCI0.PIB_.LNKB irq 10: [ 3 4 5 7 9 10 11 12] low,level,sharable 0.16.0 pci0: <ACPI PCI bus> on pcib0 agp0: <VIA 82C8363 (Apollo KT133A) host to PCI bridge> mem 0xf0000000-0xf7ffffff at device 0.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 ---- initial configuration ------------------------ \\_SB_.PCI0.PIB_.LNKC irq 5: [ 3 4 5 7 9 10 11 12] low,level,sharable 1.0.0 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.PCI0.PIB_.LNKC irq 5: [ 3 4 5 7 9 10 11 12] low,level,sharable 1.0.0 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C686 ATA100 controller> port 0x1c40-0x1c4f at device 7.1 on pci0 atapci0: Correcting VIA config for southbridge data corruption bug ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <VIA 83C572 USB controller> port 0x1c00-0x1c1f irq 9 at device 7.2 on pci0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub0: port error, restarting port 1 uhub0: port error, giving up port 1 ukbd0: Tangtop Generic USBPS2, rev 1.10/0.01, addr 2, iclass 3/1 kbd1 at ukbd0 ums0: Tangtop Generic USBPS2, rev 1.10/0.01, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. uhub0: port error, restarting port 2 uhub0: port error, giving up port 2 ums1: Logitech USB Mouse, rev 1.10/6.10, addr 3, iclass 3/1 ums1: 3 buttons and Z dir. uhci1: <VIA 83C572 USB controller> port 0x1c20-0x1c3f irq 9 at device 7.3 on pci0 usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub1: port error, restarting port 1 uhub1: port error, giving up port 1 uhub1: port error, restarting port 2 uhub1: port error, giving up port 2 isab1: <PCI-ISA bridge> at device 7.4 on pci0 pci0: <multimedia, audio> at device 7.5 (no driver attached) pci0: <simple comms> at device 7.6 (no driver attached) cbb0: <TI1420 PCI-CardBus Bridge> mem 0x88000000-0x88000fff irq 9 at device 10.0 on pci0 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb1: <TI1420 PCI-CardBus Bridge> mem 0x88001000-0x88001fff irq 10 at device 10.1 on pci0 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pci0: <serial bus, FireWire> at device 14.0 (no driver attached) rl0: <RealTek 8139 10/100BaseTX> port 0x1800-0x18ff mem 0xe8004800-0xe80048ff irq 10 at device 16.0 on pci0 rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode rl0: Ethernet address: 08:00:46:5a:c4:4b miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto acpi_acad0: <AC adapter> on acpi0 acpi_cmbat0: <Control method Battery> on acpi0 acpi_cmbat1: <Control method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model GlidePoint, device ID 0 acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0 orm0: <Option ROMs> at iomem 0xdc000-0xdffff,0xd0000-0xd3fff,0xc0000-0xcffff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec acpi_cpu: CPU throttling enabled, 16 steps from 100% to 6.2% system power profile changed to 'economy' ad0: 19077MB <HITACHI_DK23DA-20> [38760/16/63] at ata0-master UDMA100 acd0: DVD-ROM <QSI DVD-ROM SDR-081> at ata1-master PIO4 Mounting root from ufs:/dev/ad0s2a ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR ACPI-1287: *** Error: Method execution failed, AE_ERROR ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR ACPI-1287: *** Error: Method execution failed, AE_AML_NO_RETURN_VALUE ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR ACPI-1287: *** Error: Method execution failed, AE_ERROR ACPI-1287: *** Error: Method execution failed, AE_ERROR ACPI-1287: *** Error: Method execution failed, AE_ERROR system power profile changed to 'performance' logo_saver: the console does not support M_VGA_CG320 module_register_init: MOD_LOAD (logo_saver, 0xc26c4cb0, 0) error 19 --------------010105080805080406020405 Content-Type: text/plain; name="acpidump.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="acpidump.txt" acpidump: DSDT is corrupt /* RSD PTR: Checksum=17, OEMID=PTLTD, RsdtAddress=0x0fef9a90 */ /* RSDT: Length=48, Revision=1, Checksum=247, OEMID=SONY, OEM Table ID=K5, OEM Revision=0x6040000, Creator ID= LTP, Creator Revision=0x0 */ /* Entries={ 0x0fefee4c, 0x0fefeec0, 0x0fefeee8 } */ /* DSDT=0xfef9ac0 INT_MODEL=PIC SCI_INT=9 SMI_CMD=0x802f, ACPI_ENABLE=0xf0, ACPI_DISABLE=0xf1, S4BIOS_REQ=0xf2 PM1a_EVT_BLK=0x8000-0x8003 PM1a_CNT_BLK=0x8004-0x8005 PM2_TMR_BLK=0x8008-0x800b PM2_GPE0_BLK=0x8020-0x8023 P_LVL2_LAT=90ms, P_LVL3_LAT=1100ms FLUSH_SIZE=0, FLUSH_STRIDE=0 DUTY_OFFSET=0, DUTY_WIDTH=4 DAY_ALRM=125, MON_ALRM=126, CENTURY=50 Flags={WBINVD,PROC_C1,SLP_BUTTON,RTC_S4,TMR_VAL_EXT} */ --------------010105080805080406020405-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3DDDEA62.4090607>