Date: Wed, 22 Jan 2003 10:49:44 -0800 From: Oscar Ivan Lepe Aldama <oscar.lepe@acm.org> To: questions@freebsd.org Subject: Mobo has six USB ports but FreeBSD seams to only work with two, help please Message-ID: <200301221049.44268.oscar.lepe@acm.org>
next in thread | raw e-mail | index | archive | help
Hi,
I have an Intel D815EEA2 mobo with six integrated USB ports.
FreeBSD seams to only work with two of them, those besides
the integrated NIC connector. I have done "/dev/MAKEDEV usb2"
but when I do "/usr/sbin/usbd -f /dev/usb2" I get a
"usbd: Could not open /dev/usb2, Device not configured"
I'm guessing that I need to config(8) the kernel for it to work with the =
rest
of the USB ports. In fact the usb(4) page mentions it but does not explai=
ns
how. I didn't find a hint on how to do this neither in LINT nor in config=
(8).
Any help would be appreciated.
My dmesg is this:
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.7-RELEASE #0: Wed Jan 8 16:54:48 PST 2003
oscar@pc-simula1.cicese.mx:/usr/src/sys/compile/GENERICplusAGP
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (1394.83-MHz 686-class CPU)
Origin =3D "GenuineIntel" Id =3D 0x6b1 Stepping =3D 1
=20
Features=3D0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG=
E,MCA,
CM OV,PAT,PSE36,MMX,FXSR,SSE>
real memory =3D 132907008 (129792K bytes)
avail memory =3D 124125184 (121216K bytes)
Preloaded elf kernel "kernel" at 0xc0516000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 12 entries at 0xc00f2cd0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82815 (i815 GMCH) SVGA controller> mem
0xffa80000-0xffafffff,0xf800 0000-0xfbffffff irq 11 at device 2.0 on pci=
0
pcib1: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci=
0
pci1: <PCI bus> on pcib1
fxp0: <Intel Pro/100 Ethernet> port 0xde80-0xdebf mem 0xff8fe000-0xff8fef=
ff
irq 11 at device 8.0 on pci1
fxp0: Ethernet address 00:03:47:e8:e8:58
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0xdf00-0xdf3f mem
0xff700000-0xff7f ffff,0xff8ff000-0xff8fffff irq 11 at device 9.0 on pci=
1
fxp1: Ethernet address 00:02:b3:3f:e4:e0
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <Intel 82801BA/BAM (ICH2) PCI to LPC bridge> at device 31.0 on pci=
0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 ATA100 controller> port 0xffa0-0xffaf at device 31.1=
on
pci 0 ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xef40-0xef5f=
irq
11 at device 31.2 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=3D0x8086, dev=3D0x2443) at 31.3 irq 9
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xef80-0xef9f=
irq
10 at device 31.4 on pci0
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2: Standard Microsystems product 0x0140, class 9/0, rev 1.10/0.00, ad=
dr 2
device_probe_and_attach: uhub2 attach returned 6
uhub2: Standard Microsystems product 0x0140, class 9/0, rev 1.10/0.00, ad=
dr 2
device_probe_and_attach: uhub2 attach returned 6
pci0: <unknown card> (vendor=3D0x8086, dev=3D0x2445) at 31.5 irq 9
orm0: <Option ROMs> at iomem
0xc0000-0xcbfff,0xcc000-0xccfff,0xcd000-0xce7ff,0xc e800-0xcf7ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 39266MB <IC35L040AVER07-0> [79780/16/63] at ata0-master UDMA100
acd0: CDROM <GCR-8521B> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
ugen0: WINBOND W9967CF, rev 1.10/1.10, addr 3
--
=3D
=3D Oscar-Ivan Lepe-Aldama
=3D http://people.ac.upc.es/oscar
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
-------------------------------------------------------
--=20
=3D
=3D Oscar-Ivan Lepe-Aldama
=3D http://people.ac.upc.es/oscar
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200301221049.44268.oscar.lepe>