Date: Wed, 1 Dec 1999 09:45:43 -0700 (MST) From: "Justin T. Gibbs" <gibbs@narnia.plutotech.com> To: Paul Reece <paul@pulsat.com.au> Cc: scsi@FreeBSD.org Subject: Re: cam scsi and adaptec 7890/91 Message-ID: <199912011645.JAA09343@narnia.plutotech.com> In-Reply-To: <Pine.BSF.4.20.9912011548580.3094-100000@koala.pulsat.com.au>
next in thread | previous in thread | raw e-mail | index | archive | help
In article <Pine.BSF.4.20.9912011548580.3094-100000@koala.pulsat.com.au> you wrote: > > Hi. > > Have just installed 3.3-STABLE onto a machine here with onboard Adaptec > 7890/7891 Ultra2 Controller. > > When booting however I get: > > ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> rev 0x00 int a irq 11 on > pci0.12.0 > ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs > > then.. > > da0 at ahc0 bus 0 target 0 lun 0 > da0: <QUANTUM ATLAS IV 9 WLS 0909> Fixed Direct Access SCSI-3 device > da0: 11.626MB/s transfers (5.813MHz, offset 31, 16bit), Tagged Queueing > Enabled > da0: 8761MB (17942584 512 byte sectors: 255H 63S/T 1116C) How old of a 3.3-stable are you running. There was a problem related to reading SEEPROM data that could cause this problem, but it was fixed in rev 1.5.2.6 of sys/pci/ahc_pci.c. If you are completely up to date with your sources, contact me with private email and we'll explore what is happening by enabling some diagnostics. -- Justin To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199912011645.JAA09343>