Date: Wed, 18 Aug 2004 16:10:28 GMT From: Sergei Kolobov <sergei@FreeBSD.org> To: freebsd-qa@FreeBSD.org Subject: Re: kern/47451: 5.0 GENERIC(sysinstall CD) locks during boot onProliant ML530 Message-ID: <200408181610.i7IGASqu040047@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR kern/47451; it has been noted by GNATS.
From: Sergei Kolobov <sergei@FreeBSD.org>
To: John Baldwin <jhb@FreeBSD.org>, freebsd-gnats-submit@FreeBSD.org
Cc: Kevin Day <toasty@dragondata.com>
Subject: Re: kern/47451: 5.0 GENERIC(sysinstall CD) locks during boot on Proliant
ML530
Date: Wed, 18 Aug 2004 20:01:50 +0400
John,
I am experiencing the same problem on Compaq Proliant hardware.
Please find below a boot log for 5.2.1-RELEASE install CD.
My hardware configuration is:
Compaq Proliant 1600 server
BIOS P08 (04/21/1999)
Pentium II 400 MHz
256M RAM
SMART-2DH RAID controller (rev.C, firmware ver.4.50, 16M cache)
When booting normally (with vidconsole), it fails like this:
Mounting root from ufs:/dev/md0
/stand/sysinstall running as init on serial console
panic: unknown/reserved trap
cpuid = 0
....
This is a log I captured via serial console. It got slightly further - up to the
main sysinstall screen, but locked after that - no selection can be made.
I would appreciate any help resolving this issue. I have several similar servers
and wanted to install 5.2.1 on all of them.
Please let me know if you need any additional info.
Thanks,
Sergei
======[start of boot log]==========
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE #0: Mon Feb 23 20:45:55 GMT 2004
root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0e1b000.
Preloaded mfs_root "/boot/mfsroot" at 0xc0e1b21c.
MPTable: <COMPAQ PROLIANT >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium II/Pentium II Xeon/Celeron (399.09-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 268435456 (256 MB)
avail memory = 247037952 (235 MB)
ioapic0: Changing APIC ID to 8
ioapic0: Assuming intbase of 0
ioapic0 <Version 1.1> irqs 0-34 on motherboard
Pentium Pro MTRR support enabled
npx0: [FAST]
stray irq13
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
pcib0: <MPTable Host-PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: <display, VGA> at device 11.0 (no driver attached)
pcib1: <MPTable PCI-PCI bridge> at device 13.0 on pci0
pci1: <PCI bus> on pcib1
pcib1: slot 7 INTA routed to irq 30
pcib1: slot 9 INTA routed to irq 23
pcib1: slot 9 INTB routed to irq 22
tl0: <Compaq Netelligent 10/100 Proliant> port 0x2800-0x280f mem
0xc6efddf0-0xc6efddff irq 30 at device 7.0 on pci1
tl0: Ethernet address: 00:08:c7:33:47:21
miibus0: <MII bus> on tl0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
tlphy0: <ThunderLAN 10baseT media interface> on miibus0
tlphy0: 10base2/BNC, 10base5/AUI
sym0: <875> port 0x2000-0x20ff mem 0xc6eff000-0xc6efffff,0xc6efdf00-0xc6efdfff
irq 23 at device 9.0 on pci1
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
sym1: <875> port 0x2400-0x24ff mem 0xc6efe000-0xc6efefff,0xc6efde00-0xc6efdeff
irq 22 at device 9.1 on pci1
sym1: No NVRAM, ID 7, Fast-20, SE, parity checking
pci0: <base peripheral> at device 14.0 (no driver attached)
pcib2: <PCI-PCI bridge> at device 15.0 on pci0
pci2: <PCI bus> on pcib2
pcib0: slot 15 INTA routed to irq 19
pcib2: slot 0 INTA is routed to irq 19
ida0: <Compaq SMART-2/P array controller> port 0x3000-0x30ff mem
0xb8000000-0xbfffffff,0xc6ffff00-0xc6ffffff irq 19 at device 0.0 on pci2
ida0: drives=1 firm_rev=4.50
idad0: <Compaq Logical Drive> on ida0
idad0: 17351MB (35536800 sectors), blocksize=512
GEOM: create disk idad0 dp=0xc30f6608
isab0: <PCI-ISA bridge> at device 20.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xf100-0xf10f at device 20.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0-0x1f at device 20.2 on pci0
pcib0: unable to route slot 20 INTD
uhci0: Could not allocate irq
device_probe_and_attach: uhci0 attach returned 6
piix0: <PIIX Timecounter> port 0xf040-0xf04f at device 20.3 on pci0
Timecounter "PIIX" frequency 3579545 Hz quality 0
eisa0: <EISA bus> on motherboard
mainboard0: <CPQ0689 (System Board)> on eisa0 slot 0
orm0: <Option ROMs> at iomem
0xee000-0xeffff,0xe8000-0xedfff,0xc8000-0xcbfff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model NetMouse/NetScroll Optical, device ID 0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 399086643 Hz quality 800
Timecounters tick every 10.000 msec
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc09e16d8
acd0: CDROM <Compaq CRD-8241B> at ata0-master PIO4
Waiting 15 seconds for SCSI devices to settle
sa0 at sym0 bus 0 target 6 lun 0
sa0: <HP C1537A L708> Removable Sequential Access SCSI-2 device
sa0: 10.000MB/s transfers (10.000MHz, offset 16)
Mounting root from ufs:/dev/md0
/stand/sysinstall running as init on serial console
These are the predefined terminal types available to
sysinstall when running stand-alone. Please choose the
closest match for your particular terminal.
1 ...................... Standard ANSI terminal.
2 ...................... VT100 or compatible terminal.
3 ...................... FreeBSD system console (color).
4 ...................... FreeBSD system console (monochrome).
5 ...................... xterm terminal emulator.
Your choice: (1-5) 1
module_register: module pci/txp already exists!
Module pci/txp failed to register: 17
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0-0x1f at device 20.2 on pci0
pcib0: unable to route slot 20 INTD
uhci0: Could not allocate irq
device_probe_and_attach: uhci0 attach returned 6
interface cd9660.1 already present in the KLD 'kernel'!
interface sysvmsg.1 already present in the KLD 'kernel'!
module_register: module pccard/xe already exists!
Module pccard/xe failed to register: 17
module_register: module pci/pcn already exists!
Module pci/pcn failed to register: 17
module_register: module pcn/miibus already exists!
Module pcn/miibus failed to register: 17
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0-0x1f at device 20.2 on pci0
pcib0: unable to route slot 20 INTD
uhci0: Could not allocate irq
device_probe_and_attach: uhci0 attach returned 6
module_register: module pci/vr already exists!
Module pci/vr failed to register: 17
module_register: module vr/miibus already exists!
Module vr/miibus failed to register: 17
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0-0x1f at device 20.2 on pci0
pcib0: unable to route slot 20 INTD
uhci0: Could not allocate irq
device_probe_and_attach: uhci0 attach returned 6
module_register: module pci/ste already exists!
Module pci/ste failed to register: 17
module_register: module ste/miibus already exists!
Module ste/miibus failed to register: 17
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0-0x1f at device 20.2 on pci0
pcib0: unable to route slot 20 INTD
uhci0: Could not allocate irq
device_probe_and_attach: uhci0 attach returned 6
module_register: module if_tun already exists!
Module if_tun failed to register: 17
can't re-use a leaf (if_tun_debug)!
module_register: module uhub/cue already exists!
Module uhub/cue failed to register: 17
module_register: module cardbus/xl already exists!
Module cardbus/xl failed to register: 17
module_register: module pci/xl already exists!
Module pci/xl failed to register: 17
module_register: module xl/miibus already exists!
Module xl/miibus failed to register: 17
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0-0x1f at device 20.2 on pci0
pcib0: unable to route slot 20 INTD
uhci0: Could not allocate irq
device_probe_and_attach: uhci0 attach returned 6
module_register: module pccard/ed already exists!
Module pccard/ed failed to register: 17
module_register: module ed/miibus already exists!
Module ed/miibus failed to register: 17
module_register: module pci/ed already exists!
Module pci/ed failed to register: 17
module_register: module isa/ed already exists!
Module isa/ed failed to register: 17
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0-0x1f at device 20.2 on pci0
pcib0: unable to route slot 20 INTD
uhci0: Could not allocate irq
device_probe_and_attach: uhci0 attach returned 6
module_register: module pci/bge already exists!
Module pci/bge failed to register: 17
module_register: module bge/miibus already exists!
Module bge/miibus failed to register: 17
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0-0x1f at device 20.2 on pci0
pcib0: unable to route slot 20 INTD
uhci0: Could not allocate irq
device_probe_and_attach: uhci0 attach returned 6
module_register: module pci/re already exists!
Module pci/re failed to register: 17
module_register: module cardbus/re already exists!
Module cardbus/re failed to register: 17
module_register: module re/miibus already exists!
Module re/miibus failed to register: 17
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0-0x1f at device 20.2 on pci0
pcib0: unable to route slot 20 INTD
uhci0: Could not allocate irq
device_probe_and_attach: uhci0 attach returned 6
module_register: module pci/wb already exists!
Module pci/wb failed to register: 17
module_register: module wb/miibus already exists!
Module wb/miibus failed to register: 17
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0-0x1f at device 20.2 on pci0
pcib0: unable to route slot 20 INTD
uhci0: Could not allocate irq
device_probe_and_attach: uhci0 attach returned 6
module_register: module pci/rl already exists!
Module pci/rl failed to register: 17
module_register: module cardbus/rl already exists!
Module cardbus/rl failed to register: 17
module_register: module rl/miibus already exists!
Module rl/miibus failed to register: 17
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0-0x1f at device 20.2 on pci0
pcib0: unable to route slot 20 INTD
uhci0: Could not allocate irq
device_probe_and_attach: uhci0 attach returned 6
module_register: module pci/sis already exists!
Module pci/sis failed to register: 17
module_register: module sis/miibus already exists!
Module sis/miibus failed to register: 17
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0-0x1f at device 20.2 on pci0
pcib0: unable to route slot 20 INTD
uhci0: Could not allocate irq
device_probe_and_attach: uhci0 attach returned 6
module_register: module cardbus/dc already exists!
Module cardbus/dc failed to register: 17
module_register: module pci/dc already exists!
Module pci/dc failed to register: 17
module_register: module dc/miibus already exists!
Module dc/miibus failed to register: 17
can't re-use a leaf (dc_quick)!
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0-0x1f at device 20.2 on pci0
pcib0: unable to route slot 20 INTD
uhci0: Could not allocate irq
device_probe_and_attach: uhci0 attach returned 6
interface sysvshm.1 already present in the KLD 'kernel'!
module_register: module pci/bfe already exists!
Module pci/bfe failed to register: 17
module_register: module bfe/miibus already exists!
Module bfe/miibus failed to register: 17
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0-0x1f at device 20.2 on pci0
pcib0: unable to route slot 20 INTD
uhci0: Could not allocate irq
device_probe_and_attach: uhci0 attach returned 6
module_register: module uhub/aue already exists!
Module uhub/aue failed to register: 17
module_register: module aue/miibus already exists!
Module aue/miibus failed to register: 17
interface miibus.1 already present in the KLD 'kernel'!
module_register: module pci/lnc already exists!
Module pci/lnc failed to register: 17
module_register: module isa/lnc already exists!
Module isa/lnc failed to register: 17
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0-0x1f at device 20.2 on pci0
pcib0: unable to route slot 20 INTD
uhci0: Could not allocate irq
device_probe_and_attach: uhci0 attach returned 6
interface sysvsem.1 already present in the KLD 'kernel'!
module_register: module pccard/fe already exists!
Module pccard/fe failed to register: 17
module_register: module isa/fe already exists!
Module isa/fe failed to register: 17
module_register: module pci/fxp already exists!
Module pci/fxp failed to register: 17
module_register: module cardbus/fxp already exists!
Module cardbus/fxp failed to register: 17
module_register: module fxp/miibus already exists!
Module fxp/miibus failed to register: 17
can't re-use a leaf (fxp_rnr)!
can't re-use a leaf (fxp_noflow)!
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0-0x1f at device 20.2 on pci0
pcib0: unable to route slot 20 INTD
uhci0: Could not allocate irq
device_probe_and_attach: uhci0 attach returned 6
module_register: module uhub/kue already exists!
Module uhub/kue failed to register: 17
module_register: module pci/sf already exists!
Module pci/sf failed to register: 17
module_register: module sf/miibus already exists!
Module sf/miibus failed to register: 17
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0-0x1f at device 20.2 on pci0
pcib0: unable to route slot 20 INTD
uhci0: Could not allocate irq
device_probe_and_attach: uhci0 attach returned 6
[;H[2J
[11;11H+---------------------------------------------------------+[12;11H|
Probing devices, please wait (this can take a while)...
|[13;11H+---------------------------------------------------------+[A[11;11H[K
[K
[K[24;80H[H
+------------------------ sysinstall Main Menu -------------------------+
| Welcome to the FreeBSD installation and configuration tool. Please |
| select one of the options below by using the arrow keys or typing the |
| first character of the option name you're interested in. Invoke an |
| option with [SPACE] or [ENTER]. To exit, use [TAB] to move to Exit. |
| +-------------------------------------------------------------------+ |
| | Usage Quick start - How to use this menu system | |
| | Standard Begin a standard installation (recommended) | |
| | Express Begin a quick installation (for experts) | |
| | Custom Begin a custom installation (for experts) | |
| | Configure Do post-install configuration of FreeBSD | |
| | Doc Installation instructions, README, etc. | |
| | Keymap Select keyboard type | |
| | Options View/Set various installation options | |
| | Fixit Repair mode with CDROM/DVD/floppy or start shell | |
| | Upgrade Upgrade an existing system | |
| | Load Config Load default install configuration | |
| | Index Glossary of functions | |
| +-------------------------------------------------------------------+ |
+-----------------------------------------------------------------------+
| [Select] X Exit Install |
+------------------[ Press F1 for Installation Guide
]------------------+[22;30H
======[end of boot log]==========
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200408181610.i7IGASqu040047>