Date: Thu, 23 Oct 2008 16:02:48 +0300 From: "kordex -" <kordex@gmail.com> To: freebsd-net@freebsd.org Subject: nfe driver bad performance on FreeBSD 7 Message-ID: <8b8dd87a0810230602i39bbb291h6777f41022d3f0d4@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
Same issue as http://unix.derkeiler.com/Mailing-Lists/FreeBSD/net/2008-09/msg00278.html I got HP Pavilion dv6646eo laptop with same network chip. Max throughput is 800kB/s with scp. same with generic kernel. nfe0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=8<VLAN_MTU> ether 00:00:00:00:00:00 inet 192.168.1.200 netmask 0xffffff00 broadcast 192.168.1.255 media: Ethernet autoselect (100baseTX <full-duplex>) status: active lilian# MAC being all zeros is not done by me. It's BIOS doing that. I wonder if that can cause things like this. No PXE Boot for me :| Should I send this to warranty for that? lilian# uname -a FreeBSD lilian.xnet.kx 7.0-RELEASE FreeBSD 7.0-RELEASE #3: Sat Sep 27 20:36:01 UTC 2008 root@lilian.xnet.kx:/usr/obj/usr/src/sys/LILIAN_KERN i386 lilian# dmesg Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-RELEASE #3: Sat Sep 27 20:36:01 UTC 2008 root@lilian.xnet.kx:/usr/obj/usr/src/sys/LILIAN_KERN Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Turion(tm) 64 X2 Mobile Technology TL-58 (1908.67-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x60f81 Stepping = 1 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x2001<SSE3,CX16> AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!> AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch> Cores per package: 2 real memory = 2146828288 (2047 MB) avail memory = 2095497216 (1998 MB) ACPI APIC Table: <HP APIC > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 <Version 1.1> irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: <HPQOEM SLIC-MPC> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) ACPI Error (dsopcode-0671): Field [I9MN] at 544 exceeds Buffer [IORT] size 464 (bits) [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.LPC0.PMIO._CRS] (Node 0xc4de7d40), AE_AML_BUFFER_LIMIT ACPI Error (uteval-0309): Method execution failed [\\_SB_.PCI0.LPC0.PMIO._CRS] (Node 0xc4de7d40), AE_AML_BUFFER_LIMIT can't fetch resources for \\_SB_.PCI0.LPC0.PMIO - AE_AML_BUFFER_LIMIT Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x10> port 0x62,0x66 on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 25000000 Hz quality 900 cpu0: <ACPI CPU> on acpi0 powernow0: <PowerNow! K8> on cpu0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 cpu1: <ACPI CPU> on acpi0 powernow1: <PowerNow! K8> on cpu1 acpi_throttle1: <ACPI CPU Throttling> on cpu1 acpi_throttle1: failed to attach P_CNT device_attach: acpi_throttle1 attach returned 6 acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <memory, RAM> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> port 0x1d00-0x1dff at device 1.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, SMBus> at device 1.1 (no driver attached) pci0: <processor> at device 1.3 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xf2486000-0xf2486fff irq 18 at device 2.0 on pci0 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 10 ports with 10 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf2488000-0xf24880ff irq 17 at device 2.1 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb1: EHCI version 1.0 usb1: companion controller, 10 ports each: usb0 usb1: <EHCI (generic) USB 2.0 controller> on ehci0 usb1: USB revision 2.0 uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1 uhub1: 10 ports with 10 removable, self powered ugen0: <Chicony Electronics Co., Ltd. HP Webcam, class 239/2, rev 2.00/6.06, addr 2> on uhub1 nfe0: <NVIDIA nForce MCP65 Networking Adapter> port 0x30e0-0x30e7 mem 0xf2487000-0xf2487fff irq 20 at device 6.0 on pci0 miibus0: <MII bus> on nfe0 rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto nfe0: [FILTER] pcm0: <NVidia MCP65 High Definition Audio Controller> mem 0xf2480000-0xf2483fff irq 21 at device 7.0 on pci0 pcm0: [ITHREAD] pcib1: <ACPI PCI-PCI bridge> at device 8.0 on pci0 pci_link0: BIOS IRQ 15 for 7.5.INTA is invalid pci_link1: BIOS IRQ 10 for 7.5.INTB is invalid pci7: <ACPI PCI bus> on pcib1 fwohci0: <1394 Open Host Controller Interface> irq 9 at device 5.0 on pci7 fwohci0: [FILTER] fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:00:00:00:00:00:00:00 fwohci0: Phy 1394a available S400, 1 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwip0: <IP over FireWire> on firewire0 fwip0: Firewire address: 00:00:00:00:00:00:00:00 @ 0xfffe00000000, S400, maxrec 2048 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode pci7: <base peripheral> at device 5.1 (no driver attached) pci7: <base peripheral> at device 5.2 (no driver attached) pci7: <base peripheral> at device 5.3 (no driver attached) pci7: <base peripheral> at device 5.4 (no driver attached) atapci0: <nVidia nForce MCP65 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x30c0-0x30cf at device 9.0 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] atapci1: <nVidia ATA controller> port 0x30f8-0x30ff,0x30ec-0x30ef,0x30f0-0x30f7,0x30e8-0x30eb,0x30d0-0x30df mem 0xf2484000-0xf2485fff irq 23 at device 10.0 on pci0 atapci1: [ITHREAD] ata2: <ATA channel 0> on atapci1 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci1 ata3: [ITHREAD] pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0 pci1: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0 pci3: <ACPI PCI bus> on pcib3 pci3: <network> at device 0.0 (no driver attached) pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0 pci5: <ACPI PCI bus> on pcib4 vgapci0: <VGA-compatible display> port 0x4000-0x407f mem 0xce000000-0xceffffff,0xd0000000-0xdfffffff,0xcc000000-0xcdffffff irq 19 at device 0.0 on pci5 acpi_video0: <ACPI video extension> on vgapci0 pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0 pci9: <ACPI PCI bus> on pcib5 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_tz0: _CRT value is absurd, ignored (-72.6C) speaker0: <PC speaker> port 0x61 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model IntelliMouse, device ID 3 pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xcd800-0xcefff,0xdf000-0xdffff pnpid ORM0000 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: <Logitech Logitech USB Optical Mouse, class 0/0, rev 2.00/43.00, addr 2> on uhub0 ums0: 3 buttons and Z dir. ugen1: <vendor 0x08ff Fingerprint Sensor, class 255/255, rev 1.10/6.23, addr 3> on uhub0 Timecounters tick every 1.000 msec firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) acpi_tz0: _CRT value is absurd, ignored (-72.6C) acd0: DVDR <PIONEER DVDRW DVR-K17B/1.02> at ata0-master PIO4 ad4: 152627MB <Seagate ST9160821AS 3.BHE> at ata2-master UDMA33 pcm0: <HDA Codec: Conexant Venice> pcm0: <HDA Driver Revision: 20071129_0050> SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/ad4s2a KLD green_saver.ko: depends on splash - not available lilian#
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?8b8dd87a0810230602i39bbb291h6777f41022d3f0d4>