Date: Thu, 30 Apr 2009 03:46:23 GMT From: Ata Asgari <asgari@gmail.com> To: freebsd-gnats-submit@FreeBSD.org Subject: i386/134105: Realtek 8110SC with device ID 0x814910ec is not detected by FreeBSD 7.1. Most of New Mini-ITX boards are based on this chip. Message-ID: <200904300346.n3U3kNxZ051833@www.freebsd.org> Resent-Message-ID: <200904300350.n3U3o1jT008282@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 134105 >Category: i386 >Synopsis: Realtek 8110SC with device ID 0x814910ec is not detected by FreeBSD 7.1. Most of New Mini-ITX boards are based on this chip. >Confidential: no >Severity: critical >Priority: high >Responsible: freebsd-i386 >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Thu Apr 30 03:50:01 UTC 2009 >Closed-Date: >Last-Modified: >Originator: Ata Asgari >Release: 7.1 >Organization: Blue Pyramid LLC >Environment: FreeBSD pyrawall.pyra.com 7.1-RELEASE-p5 FreeBSD 7.1-RELEASE-p5 #0: Wed Apr 22 15:35:36 EDT 2009 >Description: Realtek 8110SC with device ID 0x814910ec is not detected by FreeBSD 7.1. Most of New Mini-ITX boards are based on this chip. Here is a photo of the chips : Here is a photo of the daughterboard : http://i663.photobucket.com/albums/uu359/asgari/SANY0321-Low.jpg pciconf -lv output : hostb0@pci0:0:0:0: class=0x060000 card=0x27708086 chip=0x27708086 rev=0x02 hdr=0x00 class = bridge subclass = HOST-PCI vgapci0@pci0:0:2:0: class=0x030000 card=0x27728086 chip=0x27728086 rev=0x02 hdr=0x00 class = display subclass = VGA none0@pci0:0:27:0: class=0x040300 card=0xa62516f3 chip=0x27d88086 rev=0x01 hdr=0x00 class = multimedia pcib1@pci0:0:28:0: class=0x060400 card=0x27d08086 chip=0x27d08086 rev=0x01 hdr=0x01 class = bridge subclass = PCI-PCI uhci0@pci0:0:29:0: class=0x0c0300 card=0x27c88086 chip=0x27c88086 rev=0x01 hdr=0x00 class = serial bus subclass = USB uhci1@pci0:0:29:1: class=0x0c0300 card=0x27c98086 chip=0x27c98086 rev=0x01 hdr=0x00 class = serial bus subclass = USB uhci2@pci0:0:29:2: class=0x0c0300 card=0x27ca8086 chip=0x27ca8086 rev=0x01 hdr=0x00 class = serial bus subclass = USB uhci3@pci0:0:29:3: class=0x0c0300 card=0x27cb8086 chip=0x27cb8086 rev=0x01 hdr=0x00 class = serial bus subclass = USB ehci0@pci0:0:29:7: class=0x0c0320 card=0x27cc8086 chip=0x27cc8086 rev=0x01 hdr=0x00 class = serial bus subclass = USB pcib2@pci0:0:30:0: class=0x060401 card=0x244e8086 chip=0x244e8086 rev=0xe1 hdr=0x01 class = bridge subclass = PCI-PCI isab0@pci0:0:31:0: class=0x060100 card=0x27b88086 chip=0x27b88086 rev=0x01 hdr=0x00 class = bridge subclass = PCI-ISA atapci0@pci0:0:31:2: class=0x010180 card=0x27c08086 chip=0x27c08086 rev=0x01 hdr=0x00 class = mass storage subclass = ATA none1@pci0:0:31:3: class=0x0c0500 card=0x27da8086 chip=0x27da8086 rev=0x01 hdr=0x00 class = serial bus subclass = SMBus re0@pci0:1:0:0: class=0x020000 card=0x816810ec chip=0x816810ec rev=0x02 hdr=0x00 class = network subclass = ethernet none2@pci0:2:4:0: class=0x020000 card=0x10cc16f3 chip=0x814910ec rev=0x10 hdr=0x00 class = network subclass = ethernet none3@pci0:2:6:0: class=0x020000 card=0x10cc16f3 chip=0x814910ec rev=0x10 hdr=0x00 class = network subclass = ethernet none4@pci0:2:7:0: class=0x020000 card=0x10cc16f3 chip=0x814910ec rev=0x10 hdr=0x00 class = network subclass = ethernet DMESG output : Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.1-RELEASE-p5 #0: Wed Apr 22 15:35:36 EDT 2009 sullrich@RELENG_1_2-snapshots.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.7 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Atom(TM) CPU 330 @ 1.60GHz (1601.59-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x106c2 Stepping = 2 Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x40e31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM,<b22>> AMD Features=0x20000000<LM> AMD Features2=0x1<LAHF> Logical CPUs per core: 4 real memory = 2137587712 (2038 MB) avail memory = 2081943552 (1985 MB) ACPI APIC Table: <IntelR AWRDACPI> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 ioapic0: Changing APIC ID to 4 ioapic0 <Version 2.0> irqs 0-23 on motherboard wlan: mac acl policy registered kbd1 at kbdmux0 cryptosoft0: <software crypto> on motherboard acpi0: <IntelR AWRDACPI> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 7f5e0000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0xff00-0xff07 mem 0xfdf00000-0xfdf7ffff,0xd0000000-0xdfffffff,0xfdf80000-0xfdfbffff irq 16 at device 2.0 on pci0 agp0: <Intel 82945G (945G GMCH) SVGA controller> on vgapci0 agp0: detected 7932k stolen memory agp0: aperture size is 256M pci0: <multimedia> at device 27.0 (no driver attached) pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci1: <ACPI PCI bus> on pcib1 re0: <RealTek 8168/8168B/8168C/8168CP/8168D/8111B/8111C/8111CP PCIe Gigabit Ethernet> port 0xde00-0xdeff mem 0xfddff000-0xfddfffff,0xfdef0000-0xfdefffff irq 16 at device 0.0 on pci1 re0: Using 1 MSI messages re0: Chip rev. 0x3c000000 re0: MAC rev. 0x00400000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto re0: Ethernet address: 00:30:18:ab:4a:d8 re0: [FILTER] uhci0: <UHCI (generic) USB controller> port 0xfe00-0xfe1f irq 23 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <UHCI (generic) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <UHCI (generic) USB controller> port 0xfd00-0xfd1f irq 19 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: <UHCI (generic) USB controller> on uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: <UHCI (generic) USB controller> port 0xfc00-0xfc1f irq 18 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb2: <UHCI (generic) USB controller> on uhci2 usb2: USB revision 1.0 uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 2 ports with 2 removable, self powered uhci3: <UHCI (generic) USB controller> port 0xfb00-0xfb1f irq 16 at device 29.3 on pci0 uhci3: [GIANT-LOCKED] uhci3: [ITHREAD] usb3: <UHCI (generic) USB controller> on uhci3 usb3: USB revision 1.0 uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 uhub3: 2 ports with 2 removable, self powered ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfdfff000-0xfdfff3ff irq 23 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4 uhub4: 8 ports with 8 removable, self powered pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pci2: <network, ethernet> at device 4.0 (no driver attached) pci2: <network, ethernet> at device 6.0 (no driver attached) pci2: <network, ethernet> at device 7.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH7 SATA300 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfa00-0xfa0f at device 31.2 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 speaker0: <PC speaker> port 0x61 on acpi0 cpu0: <ACPI CPU> on acpi0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 p4tcc1: <CPU Frequency Thermal Control> on cpu1 cpu2: <ACPI CPU> on acpi0 p4tcc2: <CPU Frequency Thermal Control> on cpu2 cpu3: <ACPI CPU> on acpi0 p4tcc3: <CPU Frequency Thermal Control> on cpu3 pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xcc000-0xccfff pnpid ORM0000 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 rue0: <Linksys Linksys USB LAN Adapter, class 0/0, rev 1.10/1.00, addr 2> on uhub0 miibus1: <MII bus> on rue0 ruephy0: <RealTek RTL8150 internal media interface> PHY 0 on miibus1 ruephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rue0: WARNING: using obsoleted if_watchdog interface rue0: WARNING: using obsoleted IFF_NEEDSGIANT flag rue0: Ethernet address: 00:1a:70:90:a0:6d rue1: <Linksys Linksys USB LAN Adapter, class 0/0, rev 1.10/1.00, addr 2> on uhub1 miibus2: <MII bus> on rue1 ruephy1: <RealTek RTL8150 internal media interface> PHY 0 on miibus2 ruephy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rue1: WARNING: using obsoleted if_watchdog interface rue1: WARNING: using obsoleted IFF_NEEDSGIANT flag rue1: Ethernet address: 00:1a:70:90:a0:6c ukbd0: <NOVATEK USB Keyboard, class 0/0, rev 1.10/1.12, addr 3> on uhub1 kbd2 at ukbd0 uhid0: <NOVATEK USB Keyboard, class 0/0, rev 1.10/1.12, addr 3> on uhub1 Timecounters tick every 1.000 msec IPsec: Initialized Security Association Processing. ad0: 3919MB <SanDisk SDCFX3-004G HDX 4.32> at ata0-master UDMA66 SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #3 Launched! Trying to mount root from ufs:/dev/ad0s1a >How-To-Repeat: By using any NEW Jetway Board, Daughterboard, ... I've heard it's been used some other Mini-ITX and ITX boards like MSI, Tyan >Fix: I have no idea but someone has replied my post on pfsense forum : Well it looks like the only issue is that Jetway has changed the PCI IDs and that those IDs are not claimed by the re driver. It should be a trivial kernel patch to fix this, but I don't have the expertise or development environment set up to do it myself. >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200904300346.n3U3kNxZ051833>