Date: Wed, 19 Nov 2003 10:27:28 -0500 (EST) From: Jerry McAllister <jerrymc@clunix.cl.msu.edu> To: darryl@osborne-ind.com Cc: freebsd-questions@freebsd.org Subject: Re: floppy disk - device not configured error Message-ID: <200311191527.hAJFRSI08834@clunix.cl.msu.edu> In-Reply-To: <019901c3aead$5b26a3a0$0701a8c0@darryl> from "Darryl Hoar" at Nov 19, 2003 08:56:46 AM
next in thread | previous in thread | raw e-mail | index | archive | help
>
> > -----Original Message-----
> > From: Peter Risdon [mailto:peter@circlesquared.com]
> > Sent: Wednesday, November 19, 2003 4:22 AM
> > To: darryl@osborne-ind.com
> > Cc: freebsd-questions@freebsd.org
> > Subject: Re: floppy disk - device not configured error
> >
> >
> > Darryl Hoar wrote:
> >
> > >Checked dmesg and the floppy controller
> > >is recognized, etc.
> > >
> > >
> > It's often helpful to paste your dmesg into your question
> > with problems
> > of this sort. From my dmesg:
> >
> > fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
> > 0x3f7,0x3f0-0
> > x3f5 irq 6 drq 2 on acpi0
> > fdc0: FIFO enabled, 8 bytes threshold
> >
> > So I have a floppy controller. So far so good. But what about
> > a floppy
> > drive? That's in the line:
> >
> > fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> >
> > Do you also have that?
> >
> > Peter Risdon.
> >
>
> looked at dmessg and found:
> fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
>
> but no fd0: <1440-KB 3.5" drive> on fdc0 drive 0, or for that matter
> anything like it.
>
> What does that mean ?
I guess it means that it doesn't see a floppy drive there.
Either something is wrong with the way it is plugged in or maybe
either the drive or the controller is failing in some way. Check
connections - wiggle and reseat cables, etc. Try the drive in some
other way, such as in MSWINxx if you also have that on the machine.
Or you might not have it configured in you kernel. It is by default
but might have gotten nuked somehow. Have you ever rebuilt the
kernel on that machine before? Check in
your kernel config file - in: /usr/src/sys/i386/conf/(kernel-conf-file)
for the following lines (kernel-conf-file is whatever you named it)
# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
device fd1 at fdc0 drive 1
#
fd0 and fd1 would be two floppy drives.
If you are not sure then make a copy of GENERIC to a file name
you choose in the /usr/src/sys/i386/conf/ directory. Check in that
copy of GENERIC to make sure those lines are in the file - they would
go after the 'options' entries. Note that they might just be there
already but commented out for some reason.
NOTE ALSO: If you have created a new kernel, then make a copy of that
kernel-conf file instead of GENERIC.
Then while in the /usr/src/sys/i386/conf/ directory do:
/usr/sbin/config name-of-file-you-copied-GENERIC-to
cd ../../compile/name-of-file-you-copied-GENERIC-to
make depend
make
cp /kernel /kernel.save
make install
Then reboot -- shutdown -r now
Of course, this all has to be done as root.
////jerry
>
> thanks,
> Darryl
>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200311191527.hAJFRSI08834>