Date: Thu, 28 Sep 2000 19:21:55 -0400 (EDT) From: "Brandon D. Valentine" <bandix@looksharp.net> To: scsi@freebsd.org, gibbs@freebsd.org Subject: Re: More ahc woes. Message-ID: <Pine.BSF.4.21.0009281921000.90309-200000@turtle.looksharp.net> In-Reply-To: <Pine.BSF.4.21.0009281729160.90309-100000@turtle.looksharp.net>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
On Thu, 28 Sep 2000, Brandon D. Valentine wrote:
>Attached is the boot -v from a machine running:
>FreeBSD 5.0-20000827-CURRENT #0: Sun Aug 27 12:36:38 GMT 2000
>root@usw2.freebsd.org:/usr/src/sys/compile/GENERIC
It would of course help if I attached the boot -v.
Brandon D. Valentine
--
bandix at looksharp.net | bandix at structbio.vanderbilt.edu
"Truth suffers from too much analysis." -- Ancient Fremen Saying
[-- Attachment #2 --]
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-20000827-CURRENT #0: Sun Aug 27 12:36:38 GMT 2000
root@usw2.freebsd.org:/usr/src/sys/compile/GENERIC
Calibrating clock(s) ... TSC clock: 733029985 Hz, i8254 clock: 1193263 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 732983277 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (732.98-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,XMM>
real memory = 268435456 (262144K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x0045d000 - 0x0fff7fff, 263827456 bytes (64411 pages)
avail memory = 256970752 (250948K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fdb80
bios32: Entry = 0xfdb90 (c00fdb90) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xdbb1
pnpbios: Found PnP BIOS data at 0xc00f6a80
pnpbios: Entry = f0000:6204 Rev = 1.0
Other BIOS signatures found:
ACPI: 00000000
Preloaded elf kernel "kernel" at 0xc0444000.
nulldev: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
Creating DISK md0
md0: Malloc disk
Math emulator present
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <RCC LE host to PCI bridge> on motherboard
found-> vendor=0x1166, dev=0x0009, revid=0x05
class=06-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x1166, dev=0x0009, revid=0x05
class=06-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x1002, dev=0x4756, revid=0x7a
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 3, range 32, base fd000000, size 24, enabled
map[14]: type 4, range 32, base 0000d800, size 8, enabled
map[18]: type 1, range 32, base feaff000, size 12, enabled
found-> vendor=0x8086, dev=0x1229, revid=0x08
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[10]: type 1, range 32, base feafd000, size 12, enabled
map[14]: type 4, range 32, base 0000d400, size 6, enabled
map[18]: type 1, range 32, base fe900000, size 20, enabled
found-> vendor=0x1166, dev=0x0200, revid=0x4f
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x1166, dev=0x0211, revid=0x00
class=01-01-8a, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
map[20]: type 4, range 32, base 0000ffa0, size 4, port disabled
found-> vendor=0x1166, dev=0x0220, revid=0x04
class=0c-03-10, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base feafe000, size 12, enabled
pci0: <PCI bus> on pcib0
pci0: <Host to PCI bridge (vendor=1166 device=0009)> (vendor=0x1166, dev=0x0009) at 0.0
pci0: <Host to PCI bridge (vendor=1166 device=0009)> (vendor=0x1166, dev=0x0009) at 0.1
pci0: <ATI Mach64-GV graphics accelerator> (vendor=0x1002, dev=0x4756) at 1.0 irq 11
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xd400-0xd43f mem 0xfe900000-0xfe9fffff,0xfeafd000-0xfeafdfff irq 9 at device 6.0 on pci0
fxp0: Ethernet address 00:30:48:10:59:52
bpf: fxp0 attached
isab0: <PCI to ISA bridge (vendor=1166 device=0200)> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Generic PCI ATA controller> at device 15.1 on pci0
atapci0: Busmastering DMA not enabled
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x0000
ata0: mask=00 status0=ff status1=ff
ata0: probe allocation failed
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x0001
ata1: mask=00 status0=ff status1=ff
ata1: probe allocation failed
ohci0: <OHCI (generic) USB controller> mem 0xfeafe000-0xfeafefff irq 10 at device 15.2 on pci0
ohci0: (New OHCI DeviceId=0x02201166)
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (unknown) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pcib1: <RCC LE host to PCI bridge> on motherboard
found-> vendor=0x9005, dev=0x0080, revid=0x02
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=15
map[10]: type 4, range 32, base 0000e400, size 8, enabled
map[14]: type 1, range 64, base febfe000, size 12, enabled
found-> vendor=0x9005, dev=0x008f, revid=0x02
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 4, range 32, base 0000e800, size 8, enabled
map[14]: type 1, range 64, base febff000, size 12, enabled
pci1: <PCI bus> on pcib1
ahc0: <Adaptec 29160 Ultra160 SCSI adapter> port 0xe400-0xe4ff mem 0xfebfe000-0xfebfefff irq 15 at device 1.0 on pci1
ahc0: Reading SEEPROM...done.
ahc0: BIOS eeprom is present
ahc0: Secondary High byte termination Enabled
ahc0: Secondary Low byte termination Enabled
ahc0: Primary High Byte termination Enabled
ahc0: aic7892 Wide Channel A, SCSI Id=7, 32/255 SCBs
ahc0: Downloading Sequencer Program... 428 instructions downloaded
ahc1: <Adaptec aic7892 Ultra160 SCSI adapter> port 0xe800-0xe8ff mem 0xfebff000-0xfebfffff irq 10 at device 3.0 on pci1
ahc1: Reading SEEPROM...done.
ahc1: Manual LVD Termination
ahc1: BIOS eeprom is present
ahc1: Secondary High byte termination Enabled
ahc1: Secondary Low byte termination Enabled
ahc1: Primary Low Byte termination Enabled
ahc1: Primary High Byte termination Enabled
ahc1: aic7892 Wide Channel A, SCSI Id=7, 32/255 SCBs
ahc1: Downloading Sequencer Program... 428 instructions downloaded
using shared irq10.
ex_isa_identify()
pnpbios: 16 devices, largest 218 bytes
PNP0c01: adding fixed memory32 range 0-0x9fbff, size=0x9fc00
PNP0c01: adding fixed memory32 range 0x9fc00-0x9ffff, size=0x400
PNP0c01: adding fixed memory32 range 0xe0000-0xfffff, size=0x20000
PNP0c01: adding fixed memory32 range 0x100000-0xfffffff, size=0xff00000
PNP0c01: adding fixed memory32 range 0xfec00000-0xfec00fff, size=0x1000
PNP0c01: adding fixed memory32 range 0xfee00000-0xfee00fff, size=0x1000
PNP0c01: adding fixed memory32 range 0xfff80000-0xffffffff, size=0x80000
PNP0c01: end config
pnpbios: handle 0 device ID PNP0c01 (010cd041)
PNP0000: adding fixed io range 0x20-0x21, size=0x2, align=0x1
PNP0000: adding fixed io range 0xa0-0xa1, size=0x2, align=0x1
PNP0000: adding irq mask 0x4
PNP0000: end config
pnpbios: handle 1 device ID PNP0000 (0000d041)
PNP0200: adding dma mask 0x10
PNP0200: adding fixed io range 0-0xf, size=0x10, align=0x1
PNP0200: adding fixed io range 0x80-0x90, size=0x11, align=0x1
PNP0200: adding fixed io range 0x94-0x9f, size=0xc, align=0x1
PNP0200: adding fixed io range 0xc0-0xde, size=0x1f, align=0x1
PNP0200: end config
pnpbios: handle 2 device ID PNP0200 (0002d041)
PNP0100: adding irq mask 0x1
PNP0100: adding fixed io range 0x40-0x43, size=0x4, align=0x1
PNP0100: end config
pnpbios: handle 3 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding fixed io range 0x70-0x71, size=0x2, align=0x1
PNP0b00: end config
pnpbios: handle 4 device ID PNP0b00 (000bd041)
PNP0303: adding irq mask 0x2
PNP0303: adding fixed io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding fixed io range 0x64-0x64, size=0x1, align=0x1
PNP0303: end config
pnpbios: handle 5 device ID PNP0303 (0303d041)
PNP0800: adding fixed io range 0x61-0x61, size=0x1, align=0x1
PNP0800: end config
pnpbios: handle 6 device ID PNP0800 (0008d041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding fixed io range 0xf0-0xff, size=0x10, align=0x1
PNP0c04: end config
pnpbios: handle 7 device ID PNP0c04 (040cd041)
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
PNP0c02: adding io range 0xcf8-0xcff, size=0x8, align=0x1
PNP0c02: adding io range 0x10-0x1f, size=0x10, align=0x1
PNP0c02: adding io range 0x40b-0x40b, size=0x1, align=0x1
PNP0c02: adding io range 0x4d6-0x4d6, size=0x1, align=0x1
PNP0c02: adding io range 0xc00-0xc01, size=0x2, align=0x1
PNP0c02: adding io range 0xc14-0xc14, size=0x1, align=0x1
PNP0c02: adding io range 0xc49-0xc4a, size=0x2, align=0x1
PNP0c02: adding io range 0xc52-0xc52, size=0x1, align=0x1
PNP0c02: adding io range 0xc6c-0xc6c, size=0x1, align=0x1
PNP0c02: adding io range 0xc6f-0xc6f, size=0x1, align=0x1
PNP0c02: adding io range 0xcd6-0xcd7, size=0x2, align=0x1
PNP0c02: adding io range 0xf50-0xf57, size=0x8, align=0x1
PNP0c02: adding fixed memory32 range 0xcee00-0xd7fff, size=0x9200
PNP0c02: skipping empty range
PNP0c02: skipping empty range
PNP0c02: skipping empty range
PNP0c02: skipping empty range
PNP0c02: skipping empty range
PNP0c02: skipping empty range
PNP0c02: skipping empty range
PNP0c02: end config
pnpbios: handle 8 device ID PNP0c02 (020cd041)
PNP0c02: adding io range 0x2e-0x2e, size=0x1, align=0x1
PNP0c02: adding io range 0x2f-0x2f, size=0x1, align=0x1
PNP0c02: adding io range 0x580-0x58f, size=0x10, align=0x1
PNP0c02: adding io range 0x530-0x531, size=0x2, align=0x1
PNP0c02: adding io range 0x540-0x55f, size=0x20, align=0x1
PNP0c02: adding io range 0x500-0x51f, size=0x20, align=0x1
PNP0c02: adding io range 0xc98-0xc98, size=0x1, align=0x1
PNP0c02: end config
pnpbios: handle 9 device ID PNP0c02 (020cd041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x8
PNP0501: adding irq mask 0x10
PNP0501: end config
pnpbios: handle 10 device ID PNP0501 (0105d041)
PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0x8
PNP0501: adding irq mask 0x8
PNP0501: end config
pnpbios: handle 11 device ID PNP0501 (0105d041)
PNP0401: adding io range 0x378-0x37b, size=0x4, align=0x8
PNP0401: adding io range 0x778-0x77a, size=0x3, align=0x8
PNP0401: adding irq mask 0x80
PNP0401: adding dma mask 0x8
PNP0401: end config
pnpbios: handle 12 device ID PNP0401 (0104d041)
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x1
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
PNP0700: end config
pnpbios: handle 13 device ID PNP0700 (0007d041)
PNP0f13: adding irq mask 0x1000
PNP0f13: end config
pnpbios: handle 14 device ID PNP0f13 (130fd041)
PNP0a03: end config
pnpbios: handle 15 device ID PNP0a03 (030ad041)
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc-: sc0 exists, using next available unit number
vga-: vga0 exists, using next available unit number
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
fe0 failed to probe at port 0x300 on isa0
adv0 failed to probe at port 0x330 on isa0
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0 failed to probe at port 0x134-0x137 on isa0
aic0 failed to probe at port 0x140-0x15f on isa0
ata2: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x0000
ata2: mask=00 status0=ff status1=ff
ata2: probe allocation failed
ata2 failed to probe at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata3: iobase=0x0170 altiobase=0x0376 bmaddr=0x0000
ata3: mask=00 status0=ff status1=ff
ata3: probe allocation failed
ata3 failed to probe at port 0x170-0x177,0x376 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0065
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 90 03 3c
psm: status 90 03 3c
psm: status 90 03 3c
psm: data 08 00 00
psm: status 00 00 3c
psm: status 00 02 64
psm: data 08 00 00
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x134
bt0 failed to probe at port 0x134-0x137 on isa0
cs0 failed to probe at port 0x300-0x31f on isa0
ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0 failed to probe at port 0x300-0x30f irq 10 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0 failed to probe on isa0
sc1: no video adapter is found.
sc1: <System console> failed to probe on isa0
vga1: <Generic ISA VGA> failed to probe on isa0
isa_probe_children: probing PnP devices
adv1: Invalid baseport of 0x20 specified. Nearest valid baseport is 0x100. Failing probe.
unknown: <PNP0200> can't assign resources
unknown: <PNP0200> at port 0-0xf on isa0
adv1: Invalid baseport of 0x40 specified. Nearest valid baseport is 0x100. Failing probe.
adv1: Invalid baseport of 0x70 specified. Nearest valid baseport is 0x100. Failing probe.
unknown: <PNP0303> can't assign resources
unknown: <PNP0303> at port 0x60 on isa0
adv1: Invalid baseport of 0x61 specified. Nearest valid baseport is 0x100. Failing probe.
unknown: <PNP0800> failed to probe at port 0x61 on isa0
adv1: Invalid baseport of 0xf0 specified. Nearest valid baseport is 0x100. Failing probe.
adv1: Invalid baseport of 0x4d0 specified. Nearest valid baseport is 0x330. Failing probe.
adv1: Invalid baseport of 0x2e specified. Nearest valid baseport is 0x100. Failing probe.
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> at port 0x2f8-0x2ff on isa0
unknown: <PNP0401> can't assign resources
unknown: <PNP0401> at port 0x378-0x37b on isa0
unknown: <PNP0700> can't assign resources
unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0
unknown: <PNP0f13> can't assign resources
unknown: <PNP0f13> at irq 12 on isa0
BIOS Geometries:
0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
1:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: ppp0 attached
new masks: bio 680440, tty 63109a, net 67129a
bpf: faith0 attached
bpf: gif0 attached
bpf: gif1 attached
bpf: gif2 attached
bpf: gif3 attached
bpf: lo0 attached
Waiting 15 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(noperiph:ahc1:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
ahc0: target 8 using 16bit transfers
ahc0: target 8 synchronous at 40.0MHz, offset = 0x1f
ahc0: target 6 using 16bit transfers
ahc0: target 6 synchronous at 40.0MHz, offset = 0x1e
(probe18:ahc1:0:3:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe18:ahc1:0:3:0): ILLEGAL REQUEST asc:24,0
(probe18:ahc1:0:3:0): Invalid field in CDB
ahc1: target 3 synchronous at 20.0MHz, offset = 0xf
Creating DISK cd0
Creating DISK da0
Creating DISK da1
pass0 at ahc0 bus 0 target 6 lun 0
pass0: <IBM DNES-309170W SAH0> Fixed Direct Access SCSI-3 device
pass0: Serial Number AJLH3387
pass0: 80.000MB/s transfers (40.000MHz, offset 30, 16bit)
pass1 at ahc0 bus 0 target 8 lun 0
pass1: < > Fixed Direct Access SCSI-2 device
pass1: Serial Number 194809630797
pass1: 80.000MB/s transfers (40.000MHz, offset 31, 16bit)
pass2 at ahc1 bus 0 target 3 lun 0
pass2: <PLEXTOR CD-ROM PX-40TS 1.11> Removable CD-ROM SCSI-2 device
pass2: 20.000MB/s transfers (20.000MHz, offset 15)
da1 at ahc0 bus 0 target 8 lun 0
da1: < > Fixed Direct Access SCSI-2 device
da1: Serial Number 194809630797
da1: 80.000MB/s transfers (40.000MHz, offset 31, 16bit)
da1: 307840MB (630456320 512 byte sectors: 255H 63S/T 39244C)
Mounting root from ufs:/dev/da0s1a
(cd0:ahc1:0:3:0): READ CD RECORDED CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(cd0:ahc1:0:3:0): NOT READY asc:3a,1
(cd0:ahc1:0:3:0): Medium not present - tray closed
cd0 at ahc1 bus 0 target 3 lun 0
cd0: <PLEXTOR CD-ROM PX-40TS 1.11> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
da0 at ahc0 bus 0 target 6 lun 0
da0: <IBM DNES-309170W SAH0> Fixed Direct Access SCSI-3 device
da0: Serial Number AJLH3387
da0: 80.000MB/s transfers (40.000MHz, offset 30, 16bit)
da0: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C)
da0s1: type 0xa5, start 63, end = 17912474, size 17912412 : OK
start_init: trying /sbin/init
ahc0: target 8 using asynchronous transfers
ahc0: target 8 synchronous at 40.0MHz, offset = 0x1f
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0009281921000.90309-200000>