Date: Sat, 10 Jun 1995 10:04:42 +1000 (EST) From: John Herks <john@pyromania.apana.org.au> To: hackers@freebsd.org Subject: Intel Triton chipset & 2.0R Message-ID: <199506100004.KAA21020@pyromania.apana.org.au>
next in thread | raw e-mail | index | archive | help
I have just upgraded from a Neptune based Pentium motherboard to a Triton
chipset motherboard.
My system appears to be running fine for over 12 hours since the
changeover.
One concern I have is the kernel no longer reports the following (as
reported on the neptune motherboard)..
Before on the pci bus scan I used to get -:
8243LX - pci cache controller
82378LB - pci isa bridge
Now I get the following output -:
FreeBSD 2.0-RELEASE #0: Fri Jun 9 21:23:10 EST 1995
root@pyromania.apana.org.au:/usr/src/sys/compile/PYROMANIA
CPU: Pentium (Pentium-class CPU) 100 MHz Id = 0x525 Origin = "GenuineIntel"
real memory = 66715648 (16288 pages)
avail memory = 64499712 (15747 pages)
using 750 buffers containing 6144000 bytes of memory
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <4 virtual consoles>
ed0 at 0x280-0x29f irq 5 maddr 0xd8000 msize 8192 on isa
ed0: address 00:00:c0:77:83:1b, type WD8003E (8 bit)
sio0 at 0x3f8-0x3ff flags 0x305 on isa
sio0: type 16550A (multiport)
sio1 at 0x2f8-0x2ff flags 0x305 on isa
sio1: type 16550A (multiport)
sio2 at 0x3e8-0x3ef flags 0x305 on isa
sio2: type 16550A (multiport)
sio3 at 0x2e8-0x2ef irq 4 flags 0x305 on isa
sio3: type 16550A (multiport master)
sio4 at 0x2f0-0x2f7 flags 0x705 on isa
sio4: type 16550A (multiport)
sio5 at 0x3e0-0x3e7 flags 0x705 on isa
sio5: type 16550A (multiport)
sio6 at 0x2e0-0x2e7 flags 0x705 on isa
sio6: type 16550A (multiport)
sio7 at 0x260-0x267 irq 3 flags 0x705 on isa
sio7: type 16550A (multiport master)
lpt0 at 0x3bc-0x3c3 irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: [0: fd0: 1.44MB 3.5in]
npx0 on motherboard
pci0: scanning device 0..31, mechanism=1.
pci0:0: INTEL CORPORATION, device=0x122d, class=bridge [not supported]
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
ncr0 <ncr 53c810 scsi> int a (config) irq 9 on pci0:6
reg20: virtual=0xf5a03000 physical=0xc0000000
ncr0: restart (scsi reset).
ncr0 scanning for targets 0..6 (1.12)
ncr0 waiting for scsi devices to settle
ncr0 targ 0 lun 0: type 0(direct) fixed SCSI2
ncr0 targ 0 lun 0: <QUANTUM EMPIRE_1080S 1220>
sd0(ncr0:0:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8.
sd0: 1029MB (2109376 total sec), 2874 cyl, 8 head, 91 sec, bytes/sec 512
ncr0 targ 1 lun 0: type 0(direct) removable SCSI2
ncr0 targ 1 lun 0: <SyQuest SQ3270S 2_04>
sd1(ncr0:1:0): 200ns (5 Mb/sec) offset 8.
sd1: 256MB (524288 total sec), 3140 cyl, 2 head, 83 sec, bytes/sec 512
ncr0 targ 2 lun 0: type 0(direct) fixed SCSI2
ncr0 targ 2 lun 0: <SEAGATE ST32550N 0012>
sd2(ncr0:2:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8.
sd2: 2047MB (4194058 total sec), 3511 cyl, 11 head, 108 sec, bytes/sec 512
ncr0 targ 5 lun 0: type 5(readonly) removable SCSI2
ncr0 targ 5 lun 0: <MATSHITACD-ROM CR-533 1.3b>
cd0: cd present.[291378 x 2048 byte records]
ncr0 targ 6 lun 0: type 1(sequential) removable SCSI2
ncr0 targ 6 lun 0: <EXABYTE EXB-85058SQANXR106S1>
st0(ncr0:6:0): 200ns (5 Mb/sec) offset 8.
st0: density code 0x0, drive empty
pci0:7: INTEL CORPORATION, device=0x122e, class=bridge [not supported]
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
pci uses physical addresses from 0xc0000000 to 0xc0001000
--
---------------------------------------------------------------------------
_--_|\ John Herks
/ \ Pyromania Internet Access Melbourne
\_.--._/ Phone: +613-9650-4776
v email: john@pyromania.apana.org.au
www : http://pyromania.apana.org.au
---------------------------------------------------------------------------
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199506100004.KAA21020>