From owner-freebsd-mobile Thu Aug 3 10:38:34 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from duke.cs.duke.edu (duke.cs.duke.edu [152.3.140.1]) by hub.freebsd.org (Postfix) with ESMTP id 840FB37B566 for ; Thu, 3 Aug 2000 10:37:57 -0700 (PDT) (envelope-from gallatin@cs.duke.edu) Received: from grasshopper.cs.duke.edu (grasshopper.cs.duke.edu [152.3.145.30]) by duke.cs.duke.edu (8.9.3/8.9.3) with ESMTP id NAA15317 for ; Thu, 3 Aug 2000 13:37:57 -0400 (EDT) Received: (from gallatin@localhost) by grasshopper.cs.duke.edu (8.9.3/8.9.1) id NAA94279; Thu, 3 Aug 2000 13:37:57 -0400 (EDT) (envelope-from gallatin@cs.duke.edu) From: Andrew Gallatin MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Date: Thu, 3 Aug 2000 13:37:56 -0400 (EDT) To: freebsd-mobile@freebsd.org Subject: compact flash card X-Mailer: VM 6.43 under 20.4 "Emerald" XEmacs Lucid Message-ID: <14729.39929.800624.94715@grasshopper.cs.duke.edu> Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I'm trying to get an ata compact flash card to work under FreeBSD 4.1-RELEASE in an IBM Thinkpad 600. I'm running into problems because FreeBSD cannot see the compact flash card. pccardd says: No card in database for "(null)"("(null)") If I do 'pccardc dumpcis ' I see: Configuration data for card in slot 1 Tuple #1, code = 0xff (Terminator), length = 0 The card is a Kingston cf/48 in a Kingston "Compact Flash PC Card Adapter" I've also tried other compact cards in their own compact-pc card adapters (including an IBM microdrive and an ne2000 ethernet clone) and they all behave the same way. Windows-95 can see at least the Kingston card. I've not tried others. Other (norrmal) pc cards seem to work. For the fun of it, I booted a NEWCARD kernel. It couldn't decode the cis either.. I'll append my dmesg output & config file.. Thanks for any help you can give, Drew ------------------------------------------------------------------------------ Andrew Gallatin, Sr Systems Programmer http://www.cs.duke.edu/~gallatin Duke University Email: gallatin@cs.duke.edu Department of Computer Science Phone: (919) 660-6590 Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.1-RELEASE #3: Thu Aug 3 12:18:39 EDT 2000 root@drop.cs.duke.edu:/usr/src/sys/compile/DROP Calibrating clock(s) ... TSC clock: 232094019 Hz, i8254 clock: 1193124 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Pentium II/Pentium II Xeon/Celeron (232.11-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x650 Stepping = 0 Features=0x183f9ff real memory = 66912256 (65344K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x003b6000 - 0x03fc7fff, 62988288 bytes (15378 pages) avail memory = 61423616 (59984K bytes) bios32: Found BIOS32 Service Directory header at 0xc00fd800 bios32: Entry = 0xfd820 (c00fd820) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0x0 pnpbios: Found PnP BIOS data at 0xc00fe700 pnpbios: Entry = f0000:e724 Rev = 1.0 pnpbios: Event flag at 415 Other BIOS signatures found: ACPI: 00000000 Preloaded elf kernel "kernel" at 0xc039d000. Pentium Pro MTRR support enabled md0: Malloc disk Creating DISK md0 pci_open(1): mode 1 addr port (0x0cf8) is 0x000038c8 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71928086) npx0: on motherboard npx0: INT 16 interface apm0: on motherboard apm: found APM BIOS v1.2, connected at v1.2 pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71928086) pcib0: on motherboard found-> vendor=0x8086, dev=0x7192, revid=0x02 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base 00000000, size 28 found-> vendor=0x104c, dev=0xac16, revid=0x02 class=06-07-00, hdrtype=0x02, mfdev=1 subordinatebus=3 secondarybus=1 intpin=a, irq=255 map[10]: type 1, range 32, base 21301000, size 12 found-> vendor=0x104c, dev=0xac16, revid=0x02 class=06-07-00, hdrtype=0x02, mfdev=1 subordinatebus=6 secondarybus=4 intpin=b, irq=255 map[10]: type 1, range 32, base 21300000, size 12 found-> vendor=0x10c8, dev=0x0004, revid=0x01 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base 20000000, size 24 map[14]: type 1, range 32, base 21000000, size 21 map[18]: type 1, range 32, base 21200000, size 20 found-> vendor=0x8086, dev=0x7110, revid=0x01 class=06-80-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x7111, revid=0x01 class=01-01-80, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[20]: type 1, range 32, base 0000fcf0, size 4 found-> vendor=0x8086, dev=0x7112, revid=0x01 class=0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=11 map[20]: type 1, range 32, base 00008400, size 5 found-> vendor=0x8086, dev=0x7113, revid=0x01 class=06-80-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[90]: type 1, range 32, base 0000efa0, size 4 pci0: on pcib0 pcic-pci0: mem 0x21301000-0x21301fff at device 2.0 on pci0 pcic-pci0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][CSC parallel isa irq] pcic-pci0: Legacy address set to 0x3e0 PCI Config space: 00: ac16104c 02100007 06070002 0082a808 10: 21301000 020000a0 b0030100 00000000 20: 00000000 00000000 00000000 00000000 30: 00000000 00000000 00000000 03c001ff 40: 00921014 000003e1 00000000 00000000 50: 00000000 00000000 00000000 00000000 60: 00000000 00000000 00000000 00000000 70: 00000000 00000000 00000000 00000000 80: 00449060 00000000 01818148 fba97543 90: 606282c0 00000000 00000000 00000000 Cardbus Socket registers: 00: 0000000f: 00000000: 30000710: 00000000: 10: 00000000: 00000000: 00000000: 00000000: ExCa registers: 00: 83 0c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 10: 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 pcic-pci1: mem 0x21300000-0x21300fff at device 2.1 on pci0 pcic-pci1: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][CSC parallel isa irq] PCI Config space: 00: ac16104c 02100007 06070002 0082a808 10: 21300000 020000a0 b0060400 00000000 20: 00000000 00000000 00000000 00000000 30: 00000000 00000000 00000000 03c002ff 40: 00921014 000003e1 00000000 00000000 50: 00000000 00000000 00000000 00000000 60: 00000000 00000000 00000000 00000000 70: 00000000 00000000 00000000 00000000 80: 00449060 00000000 01818148 fba97543 90: 606282c0 00000000 00000000 00000000 Cardbus Socket registers: 00: 0000000f: 00000000: 30000b10: 00000000: 10: 00000000: 00000000: 00000000: 00000000: ExCa registers: 00: 83 0c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 10: 00 00 00 00 00 00 80 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 pci0: (vendor=0x10c8, dev=0x0004) at 3.0 irq 11 isab0: at device 7.0 on pci0 isa0: on isab0 atapci0: port 0xfcf0-0xfcff at device 7.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xfcf0 ata0: mask=03 status0=50 status1=00 ata0: mask=03 status0=50 status1=00 ata0: devices = 0x1 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xfcf8 ata1: mask=01 status0=51 status1=fd ata1: mask=01 status0=10 status1=fd ata1: devices = 0x4 ata1: at 0x170 irq 15 on atapci0 uhci0: port 0x8400-0x841f irq 11 at device 7.2 on pci0 usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub0: port 1 power on failed, IOERROR uhub0: port 2 power on failed, IOERROR chip1: port 0xefa0-0xefaf at device 7.3 on pci0 pnpbios: 23 devices, largest 980 bytes PNP0000: adding fixed io range 0x20-0x21, size=0x2, align=0x1 PNP0000: adding fixed io range 0xa0-0xa1, size=0x2, align=0x1 PNP0000: adding irq mask 00x4 PNP0000: end config pnpbios: handle 0 device ID PNP0000 (0000d041) PNP0200: adding fixed io range 0-0xf, size=0x10, align=0x1 PNP0200: adding fixed io range 0x80-0x8f, size=0x10, align=0x1 PNP0200: adding fixed io range 0xc0-0xdf, size=0x20, align=0x1 PNP0200: adding dma mask 0x10 PNP0200: end config pnpbios: handle 1 device ID PNP0200 (0002d041) PNP0100: adding irq mask 00x1 PNP0100: adding fixed io range 0x40-0x43, size=0x4, align=0x1 PNP0100: end config pnpbios: handle 2 device ID PNP0100 (0001d041) PNP0b00: adding irq mask 0x100 PNP0b00: adding fixed io range 0x70-0x73, size=0x4, align=0x1 PNP0b00: end config pnpbios: handle 3 device ID PNP0b00 (000bd041) PNP0800: adding fixed io range 0x61-0x61, size=0x1, align=0x1 PNP0800: end config pnpbios: handle 4 device ID PNP0800 (0008d041) PNP0303: adding irq mask 00x2 PNP0303: adding fixed io range 0x60-0x60, size=0x1, align=0x1 PNP0303: adding fixed io range 0x64-0x64, size=0x1, align=0x1 PNP0303: end config pnpbios: handle 5 device ID PNP0303 (0303d041) IBM3780: adding irq mask 0x1000 IBM3780: end config pnpbios: handle 6 device ID IBM3780 (80374d24) PNP0c04: adding fixed io range 0xf0-0xff, size=0x10, align=0x1 PNP0c04: adding irq mask 0x2000 PNP0c04: end config pnpbios: handle 7 device ID PNP0c04 (040cd041) PNP0700: adding irq mask 0x40 PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x80 PNP0700: adding dma mask 0x4 PNP0700: end config pnpbios: handle 8 device ID PNP0700 (0007d041) PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0 PNP0a03: end config pnpbios: handle 9 device ID PNP0a03 (030ad041) PNP0c02: adding io range 0x22-0x22, size=0x1, align=0 PNP0c02: adding io range 0x2e-0x2f, size=0x2, align=0 PNP0c02: adding io range 0x92-0x92, size=0x1, align=0 PNP0c02: adding io range 0xb2-0xb3, size=0x2, align=0 PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0 PNP0c02: adding io range 0x15e0-0x15ef, size=0x10, align=0 PNP0c02: adding io range 0xef00-0xefaf, size=0xb0, align=0 PNP0c02: adding fixed memory32 range 0-0x9ffff, size=0xa0000 PNP0c02: adding fixed memory32 range 0xf0000-0xfffff, size=0x10000 PNP0c02: adding fixed memory32 range 0x100000-0x3ffffff, size=0x3f00000 PNP0c02: adding fixed memory32 range 0xffff0000-0xffffffff, size=0x10000 PNP0c02: end config pnpbios: handle 10 device ID PNP0c02 (020cd041) PNP0400: adding irq mask 0x80 PNP0400: adding io range 0x3bc-0x3bf, size=0x4, align=0 PNP0400: end config pnpbios: handle 11 device ID PNP0400 (0004d041) PNP0501: adding irq mask 0000 PNP0501: adding io range 0-0xffffffff, size=0, align=0 PNP0501: end config pnpbios: handle 13 device ID PNP0501 (0105d041) CSC0000: adding io range 0x530-0x537, size=0x8, align=0 CSC0000: adding io range 0x388-0x38b, size=0x4, align=0 CSC0000: adding io range 0x220-0x233, size=0x14, align=0x20 CSC0000: adding irq mask 0x20 CSC0000: adding dma mask 0x2 CSC0000: adding dma mask 0x1 CSC0000: end config pnpbios: handle 14 device ID CSC0000 (0000630e) CSC0010: adding io range 0x538-0x53f, size=0x8, align=0 CSC0010: end config pnpbios: handle 15 device ID CSC0010 (1000630e) CSC0001: adding io range 0x200-0x207, size=0x8, align=0 CSC0001: end config pnpbios: handle 16 device ID CSC0001 (0100630e) CSC0003: adding io range 0-0xffffffff, size=0, align=0x10 CSC0003: adding irq mask 0000 CSC0003: end config pnpbios: handle 17 device ID CSC0003 (0300630e) IBM3760: adding io range 0x130-0x13f, size=0x10, align=0 IBM3760: adding io range 0x2f8-0x2ff, size=0x8, align=0 IBM3760: adding irq mask 00x8 IBM3760: adding irq mask 0x400 IBM3760: adding dma mask 0x80 IBM3760: end config pnpbios: handle 18 device ID IBM3760 (60374d24) IBM0071: adding irq mask 0x10 IBM0071: adding io range 0x3f8-0x3ff, size=0x8, align=0x1 IBM0071: adding dma mask 0x8 IBM0071: end config pnpbios: handle 19 device ID IBM0071 (71004d24) PNP0e03: adding io range 0x3e0-0x3e1, size=0x2, align=0 PNP0e03: end config pnpbios: handle 20 device ID PNP0e03 (030ed041) PNP0680: adding irq mask 0x4000 PNP0680: adding io range 0x1f0-0x1f7, size=0x8, align=0 PNP0680: adding io range 0x3f6-0x3f7, size=0x2, align=0 PNP0680: adding io range 0xfcf0-0xfcf7, size=0x8, align=0 PNP0680: end config pnpbios: handle 23 device ID PNP0680 (8006d041) PNP0680: adding irq mask 0x8000 PNP0680: adding io range 0x170-0x177, size=0x8, align=0 PNP0680: adding io range 0x376-0x376, size=0x1, align=0 PNP0680: adding io range 0xfcf8-0xfcff, size=0x8, align=0 PNP0680: end config pnpbios: handle 25 device ID PNP0680 (8006d041) PNP0c02: adding fixed memory32 range 0xca000-0xcbfff, size=0x2000 PNP0c02: end config pnpbios: handle 27 device ID PNP0c02 (020cd041) Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 ata-: ata0 exists, using next available unit number ata-: ata1 exists, using next available unit number isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x330 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x334 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x230 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x234 bt0: Failed Status Reg Test - 3 bt_isa_probe: Probe failed at 0x130 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x134 aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed 3 aha0: status reg test failed ff atkbdc0: at port 0x60,0x64 on isa0 atkbd0: flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x54ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0065 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 psm: status 00 02 64 psm: status 00 00 64 psm: status 00 03 64 psm: status 00 03 64 psm: data 08 00 00 psm: status 10 00 64 psm: status 00 02 64 psm: data 08 00 00 psm: status 00 02 64 psm0: irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) pcic0: at port 0x3e0 iomem 0xd0000 irq 3 on isa0 pcic0: management irq 3 pccard0: on pcic0 pccard1: on pcic0 sio0: irq maps: 0x49 0x59 0x49 0x49 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: not probed (disabled) sio2: not probed (disabled) sio3: not probed (disabled) isa_probe_children: probing PnP devices unknown: can't assign resources unknown0: at port 0-0xf,0x80-0x8f,0xc0-0xdf drq 4 on isa0 unknown1: at port 0x40-0x43 irq 0 on isa0 unknown2: at port 0x70-0x73 irq 8 on isa0 unknown3: at port 0x61 on isa0 unknown: can't assign resources unknown: can't assign resources unknown4: at port 0xf0-0xff irq 13 on isa0 unknown: can't assign resources unknown5: at port 0xcf8-0xcff on isa0 unknown6: at port 0x22,0x2e-0x2f,0x92,0xb2-0xb3,0x4d0-0x4d1,0x15e0-0x15ef,0xef00-0xefaf iomem 0-0x9ffff,0xf0000-0xfffff,0x100000-0x3ffffff,0xffff0000-0xffffffff on isa0 ppc0: using normal I/O port range ppc0: SPP ppc0: at port 0x3bc-0x3bf irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode vpo0: can't connect to the drive imm0: (disconnect) s1=0x38 s2=0x38, s3=0x38 imm0: (connect) s1=0x38 s2=0x38, s3=0x38 imm0: can't connect to the drive ppi0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port plip0: on ppbus0 bpf: lp0 attached unknown: can't assign resources pcm0: at port 0x530-0x537,0x388-0x38b,0x220-0x233 irq 5 drq 1,0 on isa0 pcm: setmap 30000, ff00; 0xc56a4000 -> 30000 pcm: setmap 40000, ff00; 0xc56b4000 -> 40000 unknown7: at port 0x538-0x53f on isa0 unknown8: at port 0x200-0x207 on isa0 unknown: can't assign resources unknown: can't assign resources unknown: can't assign resources unknown9: at port 0x3e1-0x3e2 on isa0 unknown: can't assign resources unknown: can't assign resources unknown10: at iomem 0xca000-0xcbfff on isa0 BIOS Geometries: 0:03127f3f 0..786=787 cylinders, 0..127=128 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: lo0 attached bpf: gif0 attached bpf: gif1 attached bpf: gif2 attached bpf: gif3 attached bpf: faith0 attached ata0-master: success setting up UDMA2 mode on PIIX4 chip ad0: ATA-3 disk at ata0 as master ad0: 3102MB (6354432 sectors), 6304 cyls, 16 heads, 63 S/T, 512 B/S ad0: 16 secs/int, 1 depth queue, UDMA33 ad0: piomode=4 dmamode=2 udmamode=2 cblid=0 Creating DISK ad0 Creating DISK wd0 ata1-master: piomode=4 dmamode=2 udmamode=-1 dmaflag=1 ata1-master: success setting up PIO4 mode on generic chip acd0: CDROM drive at ata1 as master acd0: read 4134KB/s (4134KB/s), 128KB buffer, PIO4 acd0: Reads: CD-R, CD-RW, CD-DA stream acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray acd0: Medium: no/blank disc inside, unlocked Mounting root from ufs:/dev/ad0s2a ad0s1: type 0x6, start 63, end = 4096511, size 4096449 : OK ad0s2: type 0xa5, start 4096512, end = 6354431, size 2257920 : OK start_init: trying /sbin/init pccard: card inserted, slot 0 pccard: card inserted, slot 1 Linux-ELF exec handler installed pcic: I/O win 0 flags 15 240-25f pcic: I/O win 0 flags 5 240-25f ed0 at port 0x240-0x25f irq 10 slot 0 on pccard0 pcic: I/O win 0 flags 15 240-25f bpf: ed0 attached ed0: address 00:80:c8:ba:73:d8, type Linksys (16 bit) pccard: card removed, slot 1 pccard: card inserted, slot 1 ############################### machine i386 cpu I686_CPU ident DROP maxusers 32 #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols options INET #InterNETworking options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options SOFTUPDATES #Enable FFS soft updates support options MFS #Memory Filesystem options MD_ROOT #MD is a potential root device options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, NFS required options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad replies options KBD_INSTALL_CDEV # install a CDEV entry in /dev # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O # Optionally these may need tweaked, (defaults shown): #options NCPU=2 # number of CPUs #options NBUS=4 # number of busses #options NAPIC=1 # number of IO APICs #options NINTR=24 # number of INTs device isa device eisa device pci # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 # ATA and ATAPI devices device ata0 at isa? port IO_WD1 irq 14 device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives # SCSI Controllers device bt0 at isa? device aha0 at isa? device aic0 at isa? # SCSI peripherals device scbus # SCSI bus (required) device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 flags 0x1 device psm0 at atkbdc? irq 12 device vga0 at isa? # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? flags 0x100 # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) device apm0 at nexus? flags 0x20 # Advanced Power Management # PCCARD (PCMCIA) support device card device pcic0 at isa? irq 3 port 0x3e0 iomem 0xd0000 #device pcic1 at isa? irq 9 port 0x3e2 iomem 0xd4000 # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? disable port IO_COM2 irq 3 device sio2 at isa? disable port IO_COM3 irq 5 device sio3 at isa? disable port IO_COM4 irq 9 # Parallel port device ppc0 device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device device vpo # Requires scbus and da # PCI Ethernet NICs that use the common MII bus controller code. device miibus # MII bus support # ISA Ethernet NICs. #device ed0 at isa? port 0x280 irq 10 iomem 0xd8000 device ed device ex device ep # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really # exists only as a PCMCIA device, so there is no ISA attatement needed # and resources will always be dynamically assigned by the pccard code. device wi # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP # mode (the factory default). If you set the switches on your ISA # card for a manually chosen I/O address and IRQ, you must specify # those paremeters here. device an # Xircom Ethernet device xe # The probe order of these is presently determined by i386/isa/isa_compat.c. # Pseudo devices - the number indicates how many units to allocated. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device tun # Packet tunnel. pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device md # Memory "disks" pseudo-device gif 4 # IPv6 and IPv4 tunneling pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! pseudo-device bpf #Berkeley packet filter # USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device usb # USB Bus (required) device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse # USB Ethernet, requires mii device aue # ADMtek USB ethernet device cue # CATC USB ethernet device kue # Kawasaki LSI USB ethernet device pcm device sbc options PNPBIOS To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message