Date: Wed, 22 Sep 1999 11:36:49 -0500 (CDT) From: Jeff Enns <jenns@southwind.net> To: freebsd-questions@FreeBSD.ORG Subject: PCMCIA Message-ID: <Pine.BSI.4.02A.9909221134090.27781-101000@onyx.southwind.net>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] I have a WinBook XL which is running both RedHat Linux v6.0 and FreeBSD 3.2. RedHat auto detects the PCMCIA and uses the modem and NIC I have in the slots, however, FreeBSD doesn't. FreeBSD dumps the information about both cards to the display during boot, but it gives an error immediately afterwards (please, look at the attached log for reference) (The cards are a USR Sportster 33.6 and a 3COM 16-bit 10/100 3C574-TX). The PCMCIA bus is an IT PCI 1131. The devices /dev/card0 and /dev/card1 did not exist, so I created them with MAKEDEV. I have been using RedHat to get the I/O Addressing and IRQ settings (IRQ=4, Address=0x0300 - 0x031f), but the IRQ has been changing (as the card is PnP, I assume). I also discovered the /etc/pccard.conf.sample file which I copied to /etc/pccard.conf to attempt to use, but I am not familiar with this config file. There was not an example on using the 3C574 (in fact, this is even true with RedHat. I use the 3c59x Ethernet module in Linux, without a problem). If you need any specs on the it self here is a link to all the details http://www.winbookcorp.com/xlspecs.htm. The only thing different from the specs is I added 32MB RAM for a total of 48MB of RAM, otherwise, it's identical. Everything besides the PC Cards and the Sound Card (Haven't touched that yet) is working (including X). Here is the log file (/var/log/messages) (I cut up to, but not including, the last boot, to reduce size of file): <<messages>> Thanks for your help, Jeff [-- Attachment #2 --] Sep 22 07:50:23 troi /kernel: Copyright (c) 1992-1999 FreeBSD Inc. Sep 22 07:50:23 troi /kernel: Copyright (c) 1982, 1986, 1989, 1991, 1993 Sep 22 07:50:23 troi /kernel: The Regents of the University of California. All rights reserved. Sep 22 07:50:23 troi /kernel: FreeBSD 3.2-RELEASE #0: Tue May 18 04:05:08 GMT 1999 Sep 22 07:50:23 troi /kernel: jkh@cathair:/usr/src/sys/compile/GENERIC Sep 22 07:50:23 troi /kernel: Timecounter "i8254" frequency 1193182 Hz Sep 22 07:50:23 troi /kernel: CPU: Pentium/P55C (233.90-MHz 586-class CPU) Sep 22 07:50:23 troi /kernel: Origin = "GenuineIntel" Id = 0x543 Stepping=3 Sep 22 07:50:23 troi /kernel: Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX> Sep 22 07:50:23 troi /kernel: real memory = 50331648 (49152K bytes) Sep 22 07:50:24 troi /kernel: config> di ze0 Sep 22 07:50:24 troi /kernel: config> di lnc0 Sep 22 07:50:24 troi /kernel: config> di le0 Sep 22 07:50:24 troi /kernel: config> di ie0 Sep 22 07:50:24 troi /kernel: config> di fe0 Sep 22 07:50:24 troi /kernel: config> di ex0 Sep 22 07:50:24 troi /kernel: config> di ep0 Sep 22 07:50:24 troi /kernel: config> di ed0 Sep 22 07:50:24 troi /kernel: config> di cs0 Sep 22 07:50:24 troi /kernel: config> di bt0 Sep 22 07:50:24 troi /kernel: config> di aha0 Sep 22 07:50:24 troi /kernel: config> di adv0 Sep 22 07:50:24 troi /kernel: config> q Sep 22 07:50:24 troi /kernel: avail memory = 45555712 (44488K bytes) Sep 22 07:50:24 troi /kernel: Preloaded elf kernel "kernel" at 0xc0358000. Sep 22 07:50:24 troi /kernel: Preloaded userconfig_script "/boot/kernel.conf" at 0xc035809c. Sep 22 07:50:24 troi /kernel: Probing for devices on PCI bus 0: Sep 22 07:50:24 troi /kernel: chip0: <Intel 82439TX System Controller (MTXC)> rev 0x01 on pci0.0.0 Sep 22 07:50:24 troi /kernel: chip1: <Intel 82371AB PCI to ISA bridge> rev 0x01 on pci0.1.0 Sep 22 07:50:24 troi /kernel: ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.1.1 Sep 22 07:50:24 troi /kernel: chip2: <Intel 82371AB Power management controller> rev 0x01 on pci0.1.3 Sep 22 07:50:24 troi /kernel: vga0: <Chips & Technologies model 00e4 VGA-compatible display device> rev 0xc2 on pci0.2.0 Sep 22 07:50:24 troi /kernel: chip3: <PCI to CardBus bridge (vendor=104c device=ac15)> rev 0x01 int a irq 255 on pci0.3.0 Sep 22 07:50:24 troi /kernel: chip4: <PCI to CardBus bridge (vendor=104c device=ac15)> rev 0x01 int b irq 255 on pci0.3.1 Sep 22 07:50:24 troi /kernel: Probing for PnP devices: Sep 22 07:50:24 troi /kernel: Probing for devices on the ISA bus: Sep 22 07:50:24 troi /kernel: sc0 on isa Sep 22 07:50:24 troi /kernel: sc0: VGA color <16 virtual consoles, flags=0x0> Sep 22 07:50:24 troi /kernel: atkbdc0 at 0x60-0x6f on motherboard Sep 22 07:50:24 troi /kernel: atkbd0 irq 1 on isa Sep 22 07:50:25 troi /kernel: psm0 irq 12 on isa Sep 22 07:50:25 troi /kernel: psm0: model Generic PS/2 mouse, device ID 0 Sep 22 07:50:25 troi /kernel: sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa Sep 22 07:50:25 troi /kernel: sio0: type 16550A Sep 22 07:50:25 troi /kernel: sio1: configured irq 3 not in bitmap of probed irqs 0 Sep 22 07:50:25 troi /kernel: sio1 not found at 0x2f8 Sep 22 07:50:25 troi /kernel: fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa Sep 22 07:50:25 troi /kernel: fdc0: FIFO enabled, 8 bytes threshold Sep 22 07:50:25 troi /kernel: fd0: 1.44MB 3.5in Sep 22 07:50:25 troi /kernel: wdc0 at 0x1f0-0x1f7 irq 14 on isa Sep 22 07:50:25 troi /kernel: wdc0: unit 0 (wd0): <TOSHIBA MK2103MAV> Sep 22 07:50:25 troi /kernel: wd0: 2067MB (4233600 sectors), 4200 cyls, 16 heads, 63 S/T, 512 B/S Sep 22 07:50:25 troi /kernel: wdc0: unit 1 (atapi): <TOSHIBA CD-ROM XM-1602B/1132>, removable, accel, dma, iordy Sep 22 07:50:25 troi /kernel: acd0: drive speed 3445KB/sec, 128KB cache Sep 22 07:50:25 troi /kernel: acd0: supported read types: CD-R, CD-RW, CD-DA Sep 22 07:50:25 troi /kernel: acd0: Audio: play, 255 volume levels Sep 22 07:50:25 troi /kernel: acd0: Mechanism: ejectable tray Sep 22 07:50:25 troi /kernel: acd0: Medium: CD-ROM 120mm data disc loaded, unlocked Sep 22 07:50:25 troi /kernel: wdc1 not found at 0x170 Sep 22 07:50:25 troi /kernel: wt0 not found at 0x300 Sep 22 07:50:25 troi /kernel: mcd0 not found at 0x300 Sep 22 07:50:25 troi /kernel: matcdc0 not found at 0x230 Sep 22 07:50:25 troi /kernel: scd0 not found at 0x230 Sep 22 07:50:25 troi /kernel: ppc0 at 0x378 irq 7 flags 0x40 on isa Sep 22 07:50:25 troi /kernel: ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode Sep 22 07:50:25 troi /kernel: lpt0: <generic printer> on ppbus 0 Sep 22 07:50:25 troi /kernel: lpt0: Interrupt-driven port Sep 22 07:50:25 troi /kernel: ppi0: <generic parallel i/o> on ppbus 0 Sep 22 07:50:26 troi /kernel: plip0: <PLIP network interface> on ppbus 0 Sep 22 07:50:26 troi /kernel: lpt0: <generic printer> on ppbus 0 Sep 22 07:50:26 troi /kernel: lpt0: Interrupt-driven port Sep 22 07:50:26 troi /kernel: zp: pcmcia slot 0: U.S. Robotics~SP1336~Sportster V.34/ x2 Upgradeable~ Sep 22 07:50:26 troi /kernel: zp: pcmcia slot 1: 3Com~3C574-TX Fast EtherLink PC Card~A~001~ Sep 22 07:50:26 troi /kernel: zp0 not found at 0x300 Sep 22 07:50:26 troi /kernel: vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa Sep 22 07:50:26 troi /kernel: npx0 on motherboard Sep 22 07:50:26 troi /kernel: npx0: INT 16 interface Sep 22 07:50:26 troi /kernel: Intel Pentium detected, installing workaround for F00F bug Sep 22 07:50:26 troi /kernel: changing root device to wd0s1a Sep 22 07:50:51 troi login: ROOT LOGIN (root) ON ttyv0 Sep 22 08:00:01 troi newsyslog[243]: logfile turned over
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSI.4.02A.9909221134090.27781-101000>