Date: Fri, 12 Dec 2008 19:08:28 +0900 From: Pyun YongHyeon <pyunyh@gmail.com> To: Michael Petry <petry@netmasters.com> Cc: freebsd-current@FreeBSD.org Subject: Re: CFT: RTL8168C re(4) attach issue Message-ID: <20081212100828.GP46707@cdnetworks.co.kr> In-Reply-To: <A20916CD-E27E-4FE9-B9E7-2E0AA8D4F8B7@netmasters.com> References: <20081212024713.GK46707@cdnetworks.co.kr> <A20916CD-E27E-4FE9-B9E7-2E0AA8D4F8B7@netmasters.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, Dec 11, 2008 at 11:31:55PM -0500, Michael Petry wrote: > > On Dec 11, 2008, at 9:47 PM, Pyun YongHyeon wrote: > > >Hi, > > > >There had been several reports that some revision of RTL8168C were > >not able to access PHY which in turn resulted in device attach > >failure. For instance re(4) used to show the following messages. > >re0: Chip rev. 0x3c000000 > >re0: MAC rev. 0x00200000 > >re0: PHY write failed > >re0: PHY write failed > >re0: MII without any phy! > > > >For users who suffered from these issues, please try re(4)/rl(4) at > >the following URL and let me know how it goes. > >http://people.freebsd.org/~yongari/re/if_re.c (copy it to /usr/usr/ > >sys/dev/re/) > >http://people.freebsd.org/~yongari/re/if_rlreg.h (copy it /usr/src/ > >sys/pci/) > >http://people.freebsd.org/~yongari/re/if_rl.c (copy it /usr/src/sys/ > >pci/) > > > >And rebuild re(4) and rl(4). Since the issue is not always happen > >testers should do power recycle several times to verify the issue. > > > >Thanks. > >-- > >Regards, > >Pyun YongHyeon > >_______________________________________________ > >freebsd-current@freebsd.org mailing list > >http://lists.freebsd.org/mailman/listinfo/freebsd-current > >To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org > >" > > Thanks!! > > That got it working for me. > > HP Pavilion a6442p with a Realtek on the motherboard > > re0: <RealTek 8168/8168B/8168C/8168CP/8168D/8111B/8111C/8111CP PCIe > Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfebff000-0xfebfffff, > 0xfdff0000-0xfdffffff irq 18 at device 0.0 on pci2 > re0: Chip rev. 0x3c000000 > re0: MAC rev. 0x00200000 > miibus0: <MII bus> on re0 > rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0 > rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > 1000baseT-FDX, auto > re0: Ethernet address: 00:1f:c6:4c:55:dc > re0: [FILTER] > Thanks, would you also verify WOL functionality? -- Regards, Pyun YongHyeon
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20081212100828.GP46707>