Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 13 Dec 2012 21:23:09 -0500
From:      Mike Tancsa <mike@sentex.net>
To:        Hans Petter Selasky <hselasky@c2i.net>
Cc:        freebsd-usb@freebsd.org
Subject:   Re: USB3 SATA enclosure
Message-ID:  <50CA8D8D.9060501@sentex.net>
In-Reply-To: <201212130824.57040.hselasky@c2i.net>
References:  <50C65439.8010408@sentex.net> <201212121353.27372.hselasky@c2i.net> <50C8EEF3.1080900@sentex.net> <201212130824.57040.hselasky@c2i.net>

next in thread | previous in thread | raw e-mail | index | archive | help
On 12/13/2012 2:24 AM, Hans Petter Selasky wrote:
> Hi,
> 
> There is an error message there:
> 
> xhci0: <NEC uPD720200 USB 3.0 controller> mem 0xfb900000-0xfb901fff irq 18 at 
> device 0.0 on pci4
> usbus1: waiting for BIOS to give up control
> usbus1: timed out waiting for BIOS
> 
> 1) Can you turn off USB legacy support in the BIOS?
> 2) Can you boot with bootverbose set using 9-stable and BIOS legacy support 
> enabled?

Hi,
	That did the trick!  Actually, legacy was disabled in the BIOS.
Enabling it now shows it at full speed!

ugen1.2: <USB 3.0 SATA Bridge VIA Labs, Inc.> at usbus1, cfg=0 md=HOST
spd=SUPER (5.0Gbps) pwr=ON


0(cage)# dd if=/dev/da1 of=/dev/null bs=1024k count=900
900+0 records in
900+0 records out
943718400 bytes transferred in 6.438713 secs (146569414 bytes/sec)
0(cage)#

I still get the error

xhci0: <NEC uPD720200 USB 3.0 controller> mem 0xfb900000-0xfb901fff irq
18 at device 0.0 on pci4
usbus1: waiting for BIOS to give up control
usbus1: timed out waiting for BIOS
xhci0: 32 byte context size.
usbus1 on xhci0

	---Mike

-- 
-------------------
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, mike@sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge, Ontario Canada   http://www.tancsa.com/



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?50CA8D8D.9060501>