Date: Thu, 4 Jan 2001 19:19:08 +0900 (JST) From: Rachmat Hidajat <rachmat@canada.com> To: freebsd-questions@freebsd.org Subject: vpo error Message-ID: <Pine.BSF.4.21.0101041912430.8416-100000@okurayama.med.kobe-u.ac.jp>
next in thread | raw e-mail | index | archive | help
Hi All!!
Just got a new kernel with vpo support but still cannot make the zip drive
work. OTOH, if I boot as win95, it is very simple to browse the zip disks.
The /var/run/dmesg.boot is as followed:
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.2-RELEASE #0: Wed Jan 3 12:44:11 CET 2001
edwin@d9168.upc-d.chello.nl:/usr/src/sys/compile/GENERICZIP
Timecounter "i8254" frequency 1193182 Hz
CPU: i486 DX2 (486-class CPU)
Origin = "GenuineIntel" Id = 0x435 Stepping = 5
Features=0x3<FPU,VME>
real memory = 12582912 (12288K bytes)
config> di sn0
config> di lnc0
config> di ie0
config> di fe0
config> di cs0
config> di bt0
config> di aic0
config> di aha0
config> di adv0
config> q
avail memory = 8183808 (7992K bytes)
Preloaded elf kernel "kernel" at 0xc0439000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc043909c.
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
isa0: <ISA bus> on motherboard
fdc0: <NEC 765 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
pcic0: <VLSI 82C146> at port 0x3e0 iomem 0xd0000 on isa0
pcic0: Polling mode
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppbus0: IEEE1284 device found /NIBBLE
Probing for PnP devices on ppbus0:
ppbus0: <Hewlett-Packard HP LaserJet 5L/0101.03> HP ENHANCED PCL5,PJL
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
vpo0: <Iomega VPI0 Parallel to SCSI interface> on ppbus0
vpo0: EPP 1.9 mode
ad0: 344MB <IBM-DBOA-2360> [700/16/63] at ata0-master BIOSPIO
pccard: card inserted, slot 0
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
---------<SNIP>------------
vpo0: VP0 error/timeout (3)
vpo0: VP0 error/timeout (3)
Mounting root from ufs:/dev/ad0s1a
Can somebody point me how to make it work?
PS:Please reply to my private address whenever possible.
TIA,
Rachmat Hidajat <rachmat@canada.com>
Kobe, JAPAN
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0101041912430.8416-100000>